Professional Documents
Culture Documents
2461.2. Material:
Chloroprene rubber 70 shore A
Colour: black
d2
Note:
The physical properties of elastomere springs
means that they have a tendency to settle.
The extent of such settlement is dependent
f max.
on the internal heat of friction, speed and
number of load changes, the spring travel and
the Shore hardness.
Settlement may be as much as 3 to 5% of the
L0
spring length L0.
Physical characteristics:
Tensile strength acc. to DIN 53504:
≥ 12 N/mm²
Elongation at break acc. to DIN 53504:
d1 ≥ 250 %
Bulk density acc. to DIN 53479: 1.37 g/cm³
Compression set acc. to DIN 53517:
≤ 20 % (24 h/70 °C)
Temperature scope: -20 °C to 80 °C,
short-term to max. 120 °C
load/force (N) compression (mm) load/force (N) compression (mm) load/force (N) compression (mm)
16 20 1000 20 40 2500 32 40 50 63
600 25 32 25
900 32 2250
500 800 2000
700 1750
400 600 1500
300 500 1250
400 1000
200 300 750
200 500
100
100 250
0 0
0 2 4 6 8 10 12 0 2 4 6 8 10 12 14 16 0 4 8 12 16 20 24
load/force (N) compression (mm) load/force (N) compression (mm) load/force (N) compression (mm)
32 40 40 50
4500 32 40 32 63 80 100 125
50 63 50 12000
80 7000 63 80 100
4000
3500 6000 10000
3000 5000 8000
2500
4000
2000 6000
3000
1500 4000
2000
1000
1000 2000
500
0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30 35 0 10 20 30 40
load/force (N) compression (mm) load/force (N) compression (mm) load/force (N) compression (mm)
20000 32 40 50 63 80 32 40 50 32 40
100 125 35000 63 60000 50 63
80 100
18000 80 100 125 125 160
30000
16000 50000
14000 25000
40000
12000 20000
10000 30000
8000 15000
6000 20000
10000
4000
5000 10000
2000
0 0 0
0 10 20 30 40 0 10 20 30 40 0 10 20 30 40 50 60