Professional Documents
Culture Documents
AD-BLUE
TANK
1.2 PUMP
MODULE
1.1 2 PIN PLUG FOR 1.2 12 PIN PLUG FOR 1.3 4 PIN PLUG FOR
AD-BLUE INJECTOR PUMP MODULE NOX SENSOR
1.4 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)
INSTALLATION GUIDE
1 MODULE INSTALLATION
NOX SENSOR AHEAD OF SCR
2.a
1.1 Plug in the 2 pin connector to the AD-Blue injector. (Do not connect this NOX sensor)
1.2 Plug in the 12 pin connector to the Pump Module.
1.3 Plug in the 5 pin connector to the NOX sensor after SCR.
1.4 Stow the module near the Pump Module. ENGINE SCR
1.1 AD-BLUE
1.3 NOX SENSOR
INJECTOR
AFTER SCR
AD-BLUE
TANK
1.2 PUMP
MODULE
1.1 2 PIN PLUG FOR 1.2 12 PIN PLUG FOR 1.3 5 PIN PLUG FOR
AD-BLUE INJECTOR PUMP MODULE NOX SENSOR
1.4 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)
INSTALLATION GUIDE
1 MODULE INSTALLATION
NOX SENSOR AHEAD OF SCR
2.b
1.1 Plug in the 2 pin connector to the AD-Blue injector. (Do not connect this NOX sensor)
1.2 Plug in the 12 pin connector to the Pump Module.
1.3 Plug in the 6 pin connector to the NOX sensor after SCR.
1.4 Stow the module near the Pump Module. ENGINE SCR
1.1 AD-BLUE
1.3 NOX SENSOR
INJECTOR
AFTER SCR
AD-BLUE
TANK
1.2 PUMP
MODULE
1.1 2 PIN PLUG FOR 1.2 12 PIN PLUG FOR 1.3 6 PIN PLUG FOR
AD-BLUE INJECTOR PUMP MODULE NOX SENSOR
1.4 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)
INSTALLATION GUIDE
1 MODULE INSTALLATION
NOX SENSOR AHEAD OF SCR
3.a
1.1 Plug in the 2 pin connector to the AD-Blue injector. (Do not connect this NOX sensor)
1.2 Plug in the 12 pin connector to the Pump Module.
1.3 Plug in the 12 pin connector to the NOX sensor after SCR.
1.4 Stow the module near the Pump Module. ENGINE SCR
1.1 AD-BLUE
1.3 NOX SENSOR
INJECTOR
AFTER SCR
AD-BLUE
TANK
1.2 PUMP
MODULE
1.1 2 PIN PLUG FOR 1.2 12 PIN PLUG FOR 1.3 12 PIN PLUG FOR
AD-BLUE INJECTOR PUMP MODULE NOX SENSOR
1.4 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)
INSTALLATION GUIDE
1 MODULE INSTALLATION
NOX SENSOR AHEAD OF SCR
3.b
1.1 Plug in the 2 pin connector to the AD-Blue injector. (Do not connect this NOX sensor)
1.2 Plug in the 12 pin connector to the Pump Module.
1.3 Plug in the 12 pin connector to the NOX sensor after SCR.
1.4 Stow the module near the Pump Module. ENGINE SCR
1.1 AD-BLUE
1.3 NOX SENSOR
INJECTOR
AFTER SCR
AD-BLUE
TANK
1.2 PUMP
MODULE
CENTER POSITION 1.1 2 PIN PLUG FOR 1.2 12 PIN PLUG FOR 1.3 12 PIN PLUG FOR
Module active
AD-BLUE INJECTOR PUMP MODULE NOX SENSOR
AdBlue usage 50%
1.4 MODULE
POTENTIOMETER
AdBlue AdBlue
usage 25% usage 75%
POSITION A POSITION B
Module active Module inactive
AdBlue usage 0% AdBlue usage 100%
INSTALLATION GUIDE
1 MODULE INSTALLATION
NOX SENSOR AHEAD OF SCR
4.
1.1 Plug in the 2 pin connector to the AD-Blue injector. (Do not connect this NOX sensor)
1.2 Plug in the 5 pin connector to the NOX sensor after SCR.
1.3 Stow the module away from the exhaust.
ENGINE SCR
1.1 AD-BLUE
1.2 NOX SENSOR
INJECTOR
AFTER SCR
AD-BLUE
TANK
PUMP
MODULE
1.3 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)
INSTALLATION GUIDE
1 MODULE INSTALLATION
NOX SENSOR AHEAD OF SCR
5.
1.1 Plug in the 35 pin connector to the Pump Module. (Do not connect this NOX sensor)
1.2 Plug in the 5 pin connector to the NOX sensor after SCR.
1.3 Stow the module near the Pump Module.
ENGINE SCR
AD-BLUE
1.2 NOX SENSOR
INJECTOR
AFTER SCR
AD-BLUE
TANK
1.1 PUMP
MODULE
1.3 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)
INSTALLATION GUIDE
1 MODULE INSTALLATION 6.
1.1 Plug in the 2 pin connector to the AD-Blue injector.
1.2 Plug in the 4 pin connector to the Quality sensor.
1.3 Plug in the 3 pin connector to the Level sensor.
1.4 Stow the module near the AdBlue tank. ENGINE SCR
1.1 AD-BLUE
INJECTOR
! The AdBlue tank has to be filled with water for the
system to work properly. A physically empty tank will
result in a “Low AdBlue Level“ error. 1.2
1.3
AD-BLUE
1.3 3 PIN PLUG FOR
TANK
LEVEL SENSOR
1.4 MODULE
POTENTIOMETER
POSITION A POSITION B
Module active Module inactive
(AdBlue OFF) (AdBlue ON)