Professional Documents
Culture Documents
1 из 45
01-91
01-92
Function Page
01 Check Control Module Version Page
01-93
Note:
01-93
Note:
01-94
Note:
01-95
3A0 907 379 ABS ITT AE 20 GI V00 ABS control module identification (example)
is displayed:
Coding 03604 WSC XXXXX
- Press button.
01-96
Note:
Rapid data transfer HELP Possible cause: fuse 2 for control module-
Control module does not answer ABS -S124-
01-97
3A0 907 379 ABS ITT AE 20 GI V00 And then the following appears on the display:
Coding 03604 WSC XXXXX
- Press button.
01-98
No DTC recognized
- Press button.
01-99
Note:
1. Repair malfunction
5. Test drive.
01-100
All the possible malfunctions that can be recognized by the ABS control module -J104- and
printed out on the VAG 1551 scan tool are listed on the following pages according to the 5-
digit Diagnostic Trouble Code (DTC).
Diagnostic Trouble Codes (DTC) appear only on the print-out (in "Rapid data transfer"
mode).
Example:
Diagnostic Trouble Code (DTC)
5 digit
00277
In addition, the type of malfunction may also appear in the Diagnostic Trouble Code (DTC)
table.
Reference is made to individual test steps of the electrical test in the "Repairing malfunction"
column.
Before replacing components indicated as being faulty, check all appropriate wiring, harness
connectors and Ground (GND) connections according to the wiring diagram.
After repairs, always check and erase DTC memory again using the VAG 1551 scan tool,
also carry out a road test during which the vehicle exceeds a speed of 20 km/h (12 mph).
Repeat the On Board Diagnostic (OBD) procedure after the road test.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 11 из 45
01-101
If, despite "No DTC recognized" being displayed, the ABS system does
not operate properly, then proceed as follows:
01-102
2) Type of malfunction; this malfunction is only recognized above 20 km/h (12 mph); test
drive.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 13 из 45
01-103
2) Type of malfunction; this malfunction is only recognized above 20 km/h (12 mph); test
drive.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 14 из 45
01-104
2) Type of malfunction; this malfunction is only recognized above 20 km/h (12 mph); test
drive.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 15 из 45
01-105
00668
Battery Positive Faulty voltage supply wires, - Check fuses, wires, connections
Voltage (B+) connections, fuses 1 and/or 2 for as well as battery positive voltage
Term.30 control module-ABS, -S123- and/or (B+) supply to ABS control
-S124- module
Test step 21)
1) Page 01-136 , Electrical testing.
2) Type of malfunction; this malfunction is only recognized above 20 km/h (12 mph); test
drive.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 16 из 45
01-106
Signal outside
tolerance 2)
1) Page 01-136 , Electrical testing.
2) Type of malfunction; this malfunction is only recognized above 20 km/h (12 mph); test
drive.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 17 из 45
01-107
2) Type of malfunction; this malfunction is only recognized above 20 km/h (12 mph); test
drive.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 18 из 45
01-108
Requirements
No DTC recognized
- Indicated on display
- Press button.
01-109
Note:
Attention!
If "DTC Memory is not interrogated" is
DTC Memory is not interrogated displayed, the OBD test sequence is
faulty.
Follow the program sequence exactly:
first check DTC memory, then erase.
Ending output
01-110
Test sequence
3A0 907 379 D ABS 20 IE CAN 0001 ABS control module coding indicated on display
(example)
Coding 03704 WSC 00066
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 21 из 45
01-111
Coding table
- Press button.
Note:
If the ABS control module has been incorrectly
coded, the ABS warning light -K47- will light up
continuously and the brake system warning
light -K118- lights up when 10km/h (approx. 6
MPH) or an engine speed of 2000 RPM is
exceeded once. Simultaneously a DTC is
stored in the DTC memory Diagnotic Trouble
Code (DTC) memory, checking Page 01-98 .
If the ABS control module is not coded (code
00000), the ABS warning light -K47- flashes
once per second and the brake system warning
light -K118- light up when 10km/h (approx. 6
MPH) or an engine speed of 2000 RPM is
exceeded once.
Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD) Стр. 22 из 45
01-112
01-113
01-114
01-115
Example:
01-116
01-117
Note:
01-118
Example:
CAUTION!
01-119
Note:
01-120
01-121
01-122
01-123
01-124
01-125
- Press button.
01-126
WARNING!
01-127
01-128
01-129
01-130
01-131
01-132
01-133
01-134
01-135