Professional Documents
Culture Documents
Operating Instruction
Installation Condition:
2、 Air pressure:NULL
dangerous.
1.Getting Started
After abnormal state eliminated,press RESET on touch screen to reset the alarm.
3-1Menu Screen
2 3
5
4
Operation Mode:
①operation mode:selecte operation mode
switch MANUAL and AUTO can switch each other.Afer power is on,press MANUAL
SCREEN to directly access manual interface.If auto interface needed,press AUTO first,then
pressAUTO SCREEN.
②manual interface:Manual operation interface will be allowed into after pressed MANUAL
(manual operation interface see the next)。
③auto interface:Auto operation interface will be allowed into after pressed AUTO(auto
operation interface see the next)
④setting interface:press in SETTING SCREEN,to set a specific time and etc.(specific operation
see below).
⑤abnormal interface:into the interface of alarm history which pop up while alarm occurs
(specific operation see below).
3-2 Manual Screen
3
1
2 4
① Spray Control : Control spray-wash water jet moveing forward and backward,button
highlight after perssed, press again to stop.
※ Open the associated valve,otherwise pressure will be insufficientand and irremovability.
※ Operation of backward is interconnection with wind shear,return wind shear to origin before
backward.
② Blower Control: Control blower moving forward and backward, button highlight after
perssed, press again to stop.
※ Open the associated valve,otherwise pressure will be insufficientand and irremovability.
backward.
※ Open the associated valve,otherwise pressure will be insufficientandor to high,to damage the pomp or
other abnormal condition.
4
○ Blower:Start the blower.Press to open,press again to close.
3-3 Auto Screen
5
2
Specific information will be displayed on the error that occurred during the screen
when an exception occurs,but also sounded the alarm.
After eliminating abnormai,press RESETto release the abnormal alarm.If the exception
does not rule out,can not be reset,in the case of abnormal situation can not be washed
action.
Guidebooks:
1、Before the filter cartridge reach the alarm value or one month after installation,it
must be replaced.
3、 The cleanng liquid tank can be recycled while periodically clear the bottom
according to usage.
5、 Check regularly clean up the cleaning liquid tank liquid level monitored by stain
of transparent hose.
6、Every day after using the device:①Blow dry the water on the guide rail and
screw with air gun.②Dry the guide and screw with cloth.③Lubricating oil on