Professional Documents
Culture Documents
Please read all instructions carefully before operation to obtain the best
possible performance from the unit.
ʷʿʾʼƖʷʷʸ
ƾƭƿ
Warning How to attach/detach the
Do not operate any function that takes your faceplate
attention away from safe driving.
Caution
Volume setting:
Adjust the volume so that you can hear sounds
outside the car to prevent accident.
Lower the volume before playing digital sources
to avoid damaging the speakers by the sudden
increase of the output level. How to reset your unit
General:
Your preset adjustments will
Avoid using the USB device or iPod/iPhone if it
might hinder driving safety. also be erased.
Make sure all important data has been backed
up. We shall bear no responsibility for any loss of
recorded data.
Never put or leave any metallic objects (such as
coins or metal tools) inside the unit, to prevent a Maintenance
short circuit.
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicon or
soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector
with a cotton swab gently, taking care not to
damage the connector.
2 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Contents
Preparation ............................................................ 3 Bluetooth姞 ............................................................. 9
Canceling the display demonstration Sound adjustments .......................................... 10
Setting the clock Menu operations ............................................... 11
Basic operations ................................................... 4 Additional information ................................... 13
Remote control (KD-X200/KD-X100 only) ........ 5 Troubleshooting ................................................ 15
Radio ........................................................................ 6 Specifications ..................................................... 16
USB ............................................................................ 7 Installation/Connection .................................. 17
iPod/iPhone (KD-X200 only) ................................ 8
External components ......................................... 9
Preparation
Canceling the display Setting the clock
demonstration
1
The display demonstration is always turned on (Hold)
unless you cancel it.
1 2 Select <CLOCK>.
(Hold)
2
3 Select <CLOCK SET>.
(Initial setting)
3 Select <DEMO OFF>.
ENGLISH |ޓ3
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Basic operations
Basic operations
Faceplate Remote control
Volume knob Display window (KD-X200/KD-X100 only)
4 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Basic operations
Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source Display
FM/AM/SW1/SW2 Frequency ) Day/Clock
USB Album title/Artist - Track title - Track no./Playing time -
USB-IPOD(HEAD MODE/ Day/Clock - (back to the beginning)
IPOD MODE) *1
USB-IPOD(EXT MODE) *1 EXT MODE) Day/Clock
AUX AUX) Day/Clock
BT AUDIO BT AUDIO) Day/Clock
*1 For KD-X200 only.
Remote control
KD-X200/KD-X100 only
Preparing Caution
When you use the remote control for the first Do not leave the remote control in hot places
time, pull out the insulation sheet. such as on the dashboard.
The lithium battery is in danger of explosion if
replaced incorrectly. Replace it only with the
same or equivalent type.
Insulation sheet
The battery pack or batteries shall not be
exposed to excessive heat such as sunshine, fire
Replacing the lithium coin or the like.
battery Keep battery out of reach of children and in
original package until ready to use. Dispose of
If the effectiveness of the remote control used batteries promptly. If swallowed, contact a
decreases, replace the battery. physician immediately.
CR2025
ENGLISH |ޓ5
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Radio
Radio
Searching for a station
B Select <FM>, <AM>, <SW1> or <SW2>.
Auto search. (Press)
Manual search. (Hold)
A “M” flashes, then press the button repeatedly.
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
- - - - - - - - or - - - - - - - -
Storing stations in memory
Manual presetting
You can preset up to 18 stations for FM, 6 stations
for AM, SW1 and SW2.
While listening to a station... Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.
(Hold)
1 (Hold)
The preset number flashes and “MEMORY”
appears. The current station is stored to the
selected number button (1 - 6).
2 -<TUNER>
- - - - - - - - or - - - - - - - - -<RADIO TIMER>
1 -<OFF>/<ONCE>/
(Hold) <DAILY>/<WEEKLY>
[OFF] Cancels Radio Timer.
“PRESET MODE” flashes. ONCE Activates once.
2 Select preset number. DAILY Activates daily.
WEEKLY Activates weekly.
3 Select the preset station.
The preset number flashes and “MEMORY” -<FM>/<AM>/<SW1>/
appears. <SW2>
-<01> ... <18> for FM/
Auto presetting (FM only) <01> ... <06> for AM/
SSM (Strong-station Sequential Memory) SW1/SW2
You can preset up to 18 stations for FM. 4 Set the activation day and time.
1 (Hold)
2 -<TUNER>
-<SSM> 5 Press MENU to exit.
-<SSM 01 – 06> lights up after the Radio Timer has been set.
“SSM” flashes. When all the stations are stored, Only one timer can be set. Setting a new timer
“SSM” stops flashing. will override the previous setting.
To preset <SSM 07 – 12>/<SSM 13 – 18>, The Radio Timer will not activate if the unit is
repeat steps 1 and 2. turned off or if <AM>/<SW1>/<SW2> is set to
<OFF> in <SRC SELECT> after selecting an AM/
Selecting a preset station SW1/SW2 station for the timer.
6 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
USB USB
Playing a USB device 3 Select a track.
USB input terminal
USB 2.0 cable*
(not supplied) If the USB device contains many folders or tracks,
you can fast search for the desired folder or track
by turning the volume knob quickly.
The source changes to “USB” and playback starts. Selecting the playback modes
* Do not leave the cable in the car when not in You can select one of the following playback
use. modes at a time.
This unit can play MP3/WMA/WAV files stored 1
in USB mass storage device (such as a USB Press 6 for REPEAT.
memory and Digital Audio Player). Press 5 for RANDOM.
Selecting a folder/track 2 Press the button repeatedly.
Selects folder. REPEAT
RPT OFF Cancels repeat playback.
TRACK RPT Repeats current track.
Selects track. (Press) FOLDER RPT Repeats current folder.
Fast-forwards or reverses the “FOLDER RPT” is not applicable for JPC/JMC file.
track. (Hold)
RANDOM
RND OFF Cancels random playback.
Randomly plays all tracks of
Selecting a track/folder from FOLDER RND current folder, then tracks of
the list next folders.
- - - - - - - - or - - - - - - - -
Select the desired list. (For JVC Playlist
Creator (JPC) and JVC Music Control (JMC)
file) (' page 14)
ENGLISH |ޓ7
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
iPod/iPhone
KD-X200 only
8 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
External components External components
You can connect an external component to the AUX (auxiliary) input jack on the faceplate.
For details, refer also to the instructions supplied with the external components.
.
Playing an external component 1 Connect to AUX terminal on the faceplate.
2 Select <AUX>.
from AUX
3.5 mm stereo mini plug
with “L” shaped connector 3 Turn on the connected component and
(not supplied) start playing the source.
Portable audio
player, etc.
Bluetooth姞
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately
purchased) to the auxiliary input jack (AUX) on the faceplate of the unit.
KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this
unit.
Operations may be different depending on the connected Bluetooth device. For details, refer also to
the instructions supplied with the device.
Wiring harness of the unit
KS-BTA100 (A page 19)
Blue/white
Blue/white: Remote
Black
Black: Ground
Brown
Brown: Tel muting
Preparation
For details on registering and using the Bluetooth device, refer to the instructions manual supplied with
KS-BTA100.
1 Register (pair) a Bluetooth device with KS-BTA100.
2 Change the <SRC SELECT> settings of this unit.
-<SRC SELECT>
(Hold) -<AUX>
-<BT ADAPTER>
3 Press MENU to exit.
ENGLISH |ޓ9
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Sound adjustments
Sound adjustments
This unit memorizes sound settings adjusted for each individual source.
Selecting the preset sound Pro Equalizer
You can select a preset sound mode, for each 1
(Hold)
individual source, suitable for the music genre.
2 -<PRO EQ>
-<BASS>/<MIDDLE>/
<TREBLE>
- - - - - - - - or - - - - - - - -
Press repeatedly. 3
10 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Menu operations Menu operations
1 (Hold) 3 Repeat step 2 if necessary.
To return to the previous menu, press .
If no operation is done for about 60 seconds, the To exit from the menu, press DISP or MENU.
operation will be canceled.
2
ENGLISH |ޓ11
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Menu operations
Menu item Selectable setting (Initial: [XX])
CLOCK SET For settings, ' page 3.
CLOCK
CLOCK DISP ON/[OFF]: Activates or deactivates clock display when the unit is turned
(Clock display) off.
DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>
setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
DIMMER
12 |ޓENGLISH
KD-X200_150_100_U_EN 2013/1/4ޓ10:18:27
Additional information Additional information
About audio files About USB device
Playable files When connecting a USB cable, use the USB 2.0
File extensions: MP3(.mp3), WMA(.wma), cable.
WAV(.wav) You cannot connect a computer or portable
Bit rate: HDD to the USB input terminal of the unit.
MP3: 8 kbps - 320 kbps Connect only one USB device to the unit at a
WMA: 16 kbps - 320 kbps time. Do not use a USB hub.
Sampling frequency: USB devices equipped with special functions
MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, such as data security functions cannot be used
22.05kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz with the unit.
WMA: 8 kHz - 48 kHz Do not use a USB device with 2 or more
WAV: 48 kHz, 44.1 kHz (USB source only) partitions.
Variable bit rate (VBR) files. (The elapsed time This unit cannot recognize a USB device whose
for VBR files will not be displayed correctly.) rating is other than 5 V and exceeds 1 A.
Others This unit may not recognize a memory card
inserted into the USB card reader.
This unit can show WMA Tag and ID3 Tag This unit may not play back files in a USB
Version 1.0/1.1/2.3/2.4 (for MP3).
device properly when using a USB extension
The search function works but search speed is cord.
not constant. Depending on the shape of the USB devices
and connection ports, some USB devices may
not be attached properly or the connection
might be loose.
Operation and power supply may not work as
intended for some USB devices.
The maximum number of characters for:
– Folder names: 64 characters
– File names: 64 characters
– MP3 Tag: 64 characters
– WMA Tag: 64 characters
– WAV Tag: 64 characters (USB source only)
This unit can recognize a total of 20480 files,
999 folders (999 files per folder including folder
without unsupported files), and of 8
hierarchies.
Cautions
Do not pull out and attach the USB device
repeatedly while “READING” is shown on the
display.
Electrostatic shock at connecting a USB device
may cause abnormal playback of the device. In
this case, disconnect the USB device then reset
this unit and the USB device.
Do not leave a USB device in the car, expose to
direct sunlight, or high temperature. Failure to
do so may result in deformation or cause
damages to the device.
ENGLISH |ޓ13
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Additional information
About iPod/iPhone About JVC Playlist Creator and
iPod/iPhone that can be connected to this unit: JVC Music Control
- iPod touch (4th generation) This unit supports the PC application JVC
- iPod touch (3rd generation) Playlist Creator and Android™ application JVC
- iPod touch (2nd generation) Music Control.
- iPod touch (1st generation)
When you play audio file with song data added
- iPod classic
using the JVC Playlist Creator or JVC Music
- iPod with video (5th generation)*
Control, you can search for audio file by
- iPod nano (6th generation)
Genres, Artists, Albums, Playlists, and Songs.
- iPod nano (5th generation)
- iPod nano (4th generation) JVC Playlist Creator and JVC Music Control are
- iPod nano (3rd generation) available from the following website:
- iPod nano (2nd generation) <http://www3.jvckenwood.com/english/car/
- iPod nano (1st generation)* index.html> (English website only).
- iPhone 4S
- iPhone 4
- iPhone 3GS
- iPhone 3G
- iPhone
*<IPOD MODE>/<EXT MODE> are not
applicable.
It is not possible to browse video files on the
“Videos” menu in <HEAD MODE>.
The song order displayed on the selection
menu of this unit may differ from that of the
iPod.
When operating an iPod/iPhone, some
operations may not be performed correctly or
as intended. In this case, visit the following JVC
website:
<http://www3.jvckenwood.com/english/car/
index.html> (English website only).
14 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Troubleshooting Troubleshooting
Symptom Remedy/Cause
4 General
No sound, sound interrupted or Check the cords, antenna and cable connections.
static noise. Check the condition of the connected device and recorded
tracks.
Ensure to use the recommended stereo mini plug when
connecting to an external component. (' page 9)
“MISWIRING CHK WIRING THEN Ensure the terminals of the speaker wires are properly insulated
RESET UNIT”/“WARNING CHK with tape before resetting the unit. (' page 2)
WIRING THEN RESET UNIT” If the message does not disappear, consult your JVC car audio
appears on the display and no dealer or kits supplying company.
operations can be done.
The unit does not work at all. Reset the unit. (' page 2)
Source cannot be selected. Check the <SRC SELECT> setting. (' page 12)
The correct characters are not This unit can only display letters (upper case), numbers, and a
displayed (e.g. album name). limited number of symbols.
4 FM/AM
SSM automatic presetting does Store stations manually.
not work.
4 USB/iPod/iPhone
“READING” keeps flashing on the A longer readout time is required. Do not use too many
display. hierarchical levels and folders.
Reattach the USB device.
Tracks/folders are not played The playback order is determined by the file name.
back in the order you have
intended.
“NO FILE” appears on the display. Check whether the selected folder, the connected USB device,
or the iPod/iPhone contains a playable file.
“NOT SUPPORT” appears on the Check whether the track is a playable file format.
display and track skips.
“CANNOT PLAY” flashes on Check whether the connected device is compatible with this
the display. unit. (USB: ' page 16) (iPod/iPhone: ' page 14)
The unit cannot detect the Ensure that the device contains files in the supported
connected device. formats. (' page 13)
Reattach the device.
The iPod/iPhone does not turn Check the connection between this unit and iPod/iPhone.
on or does not work. *1 Detach and reset the iPod/iPhone using hard reset. For
details on resetting the iPod/iPhone, refer to the instruction
manual supplied with the iPod/iPhone.
Check whether <IPOD SWITCH> setting is appropriate.
(' page 8)
*1 For KD-X200 only.
ENGLISH |ޓ15
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Specifications
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power Output 50 W per channel
Continuous Power Output (RMS) 20 W per channel into 4Ω, 40 Hz to 20 000 Hz at
less than 1% total harmonic distortion.
Load Impedance 4Ω (4Ω to 8Ω allowance)
Frequency Response 40 Hz to 20 000 Hz
Signal-to-Noise Ratio 80 dB
Line-Out, Subwoofer-Out Level/Impedance 2.5 V/20 kΩ load (full scale)
(for KD-X150)
Output Impedance ≤ 600Ω
TUNER SECTION
FM Frequency Range 87.5 MHz to 108.0 MHz (50 kHz step)
Usable Sensitivity 9.3 dBf (0.8 μV/75Ω)
50 dB Quieting Sensitivity 16.3 dBf (1.8 μV/75Ω)
Alternate Channel 65 dB
Selectivity (400 kHz)
Frequency Response 40 Hz to 15 000 Hz
Stereo Separation 40 dB
AM Frequency Range MW : 531 kHz to 1 611 kHz (9 kHz step)
SW1 : 2 940 kHz to 7 735 kHz (5 kHz step)
SW2 : 9 500 kHz to 10 135 kHz/
11 580 kHz to 18 135 kHz (5 kHz step)
Sensitivity/Selectivity 20 μV/40 dB
USB SECTION
USB Standard USB 1.1, USB 2.0
Data Transfer Rate (Full Speed) Max. 12 Mbps
Compatible Device Mass storage class
Compatible File System FAT 32/16/12
Playable Audio Format MP3/WMA/WAV
Maximum Supply Current DC 5 V " 1 A
GENERAL
Power Requirement (Operating Voltage) DC 14.4 V (11 V to 16 V allowance)
Grounding System Negative ground
Allowable Operating Temperature 0°C to +40°C
Dimensions Installation Size approx. 182 mm × 53 mm × 107 mm
(W × H × D) Panel Size approx. 188 mm × 59 mm × 13 mm
Weight 0.65 kJ (excluding accessories)
Subject to changes without notice.
16 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Installation/Connection Installation/Connection
ENGLISH |ޓ17
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Installation/Connection
Installing the unit
In-dash mounting
Do the required
wiring.
(A page 19)
Pocket
Bracket (not supplied)
18 |ޓENGLISH
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Installation/Connection
Wiring connection
Signal cord*1 KD-X150
JVC Amplifier Rear/subwoofer output
10 A fuse
Factory wiring
Antenna terminal harness (vehicle)
D
Remote Light blue/yellow
wire*1 To the steering wheel
KD-X200 remote control adapter
Orange/white: Illumination
ENGLISH |ޓ19
KD-X200_150_100_U_EN 2012/12/14ޓ21:24:19
Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to
connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accessory with iPod,
or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries.
Android is trademark of Google Inc.
.