Professional Documents
Culture Documents
CONTENT
a) DRUM BRAKE
Drum brakes are one of the brake construction that uses vehicle braking using brake
b) DEMOLITION STEP
Tools needed
Wheel lock
SST
Steel hammer
14 mm bolt size.
Tang
c) DISTRIBUTION SEQUENCE
clean if it is not flat it can be turned on the edge, do not pass the minimum value.
Using a caliper run, check the diameter in the drum, the results should not be
Check the possibility of dirty or uneven canvas, sandpaper until smooth and flat,
Measure the thickness of the resulting canvas should not be below the minimum
value.
Install the rear brake pad and lock it tightly using pliers.
Attach the hand brake cable using pliers and attach the canvas and lock using pliers.
Install drum
Installing a wheel.
Install the wheel on the drum then attach the wheel nut.
Tighten the wheel nut evenly using the moment key with a moment of 14 Kg.
Adjust the brake shoe gap by aligning it until the wheel is locked and reduce between 2
notches.
f) TESTING / TESTING