Professional Documents
Culture Documents
--`,```,,`,,```,,,,,,`,,`,,,,`,-`-`,,`,,`,`,,`---
(PQR). These forms are for the shielded metal-arc These forms are for torch brazing (TB), furnace brazing
(SMAW), submerged-arc (SAW), gas metal-arc (FB), induction brazing (IB, resistance brazing (RB), and
(GMAW), and gas tungsten-arc (GTAW) welding pro- dip brazing (DB) processes.
cesses, or a combination of these processes. Forms for other brazing processes may follow the gen-
Forms for other welding processes may follow the eral format of Forms QB-482 and QB-483, as applicable.
general format of Forms QW-482 and QW-483, as appli- Form QB-484 is a suggested format for Brazer/Brazing
cable. Operator/Performance Qualification (BPQ).
241
--`,```,,`,,```,,,,,,`,,`,,,,`,-`-`,,`,,`,`,,`---
Backing (Yes) (No)
Backing Material (Type)
(Refer to both backing and retainers.)
This form (E00006) may be obtained from the Order Dept., ASME, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300
242
QW-482 (Back)
WPS No. Rev.
POSITIONS (QW-405) POSTWELD HEAT TREATMENT (QW-407)
Position(s) of Groove Temperature Range
Welding Progression: Up Down Time Range
Position(s) of Fillet
GAS (QW-408)
PREHEAT (QW-406) Percent Composition
Preheat Temp. Min. Gas(es) (Mixture) Flow Rate
Interpass Temp. Max.
Preheat Maintenance Shielding
(Continuous or special heating, where applicable, should be recorded) Trailing
Backing
TECHNIQUE (QW-410)
String or Weave Bead
Orifice or Gas Cup Size
--`,```,,`,,```,,,,,,`,,`,,,,`,-`-`,,`,,`,`,,`---
Initial and Interpass Cleaning (Brushing, Grinding, etc.)
243
Company Name
Procedure Qualification Record No. Date
WPS No.
Welding Process(es)
Types (Manual, Automatic, Semi-Auto.)
JOINTS (QW-402)
This form (E00007) may be obtained from the Order Dept., ASME, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300
244
QW-483 (Back)
PQR No.
Tensile Test (QW-150)
Comments:
Macro — Results
Other Tests
Type of Test
Deposit Analysis
Other
Manufacturer
Date By
(Detail of record of tests are illustrative only and may be modified to conform to the type and number of tests required by the Code.)
245
RESULTS
Longitudinal r
462.5(c)];
246
[QW-462.3(a)] Lo
sistant overlay [QW-
test for fusion [QW
247
--`,```,,`,,```,,,,,,`,,`,,,,`,-`-`,,`,,`,`,,`---
--`,```,,`,,```,,,,,,`,,`,,,,`,-`-`,,`,,`,`,,`---
Measured InterpassTemperature (⬚F or ⬚C):
248
Br
Flux Type or Trade Name:
Fuel Gas:
Flame Type:
Recommended Brazing Temperature:
Other:
--`,```,,`,,```,,,,,,`,,`,,,,`,-`-`,,`,,`,`,,`---
249
250
04
We certify that the statements in this record are correct and that the test coupons were prepared, brazed, and tested in accordance with the
requirements of Section IX of the ASME Boiler and Pressure Vessel Code.
Company Name:
By: Date:
251