Professional Documents
Culture Documents
WCB BEARING Company Limited is established in 2006.We supplied excellent product and service to
every user. Moreover, we have gained ISO9001 certificate for our control of quality. We are
specialized in slewing bearings, slew drive, gears and other medium and large size bearing. Product
range is from 50mm to 5000mm. We possess very professional in controlling the quality of our product.
Since we have very strong ability both in design and technical analysis, we can provide our customers
with exact, suitable, economic products also the technical services. We've built up good relationship with
our customers all over the world, especially in the Europe and USA market. Product widely used in
metallurgy, mining, oil, chemistry, light industry, aviation, harbor/quay, vessels, military industry,
Our goal is to supply the customer high quality, suitable products and professional, prompt service to
INDEX
SLEWING RING
Slewing Rings Introduction 4
Technical Data
SLEW DRIVE
Slew Drive Introduction 25
TURNTABLE
Turntable data 48
GEAR
Research center 50
Working areas 51
Inspection 51
Applications 52
Gear Data 53
σb σs δ5 ψ AKU
Material
C Si Mn Cr Mo Tensile strength Yield strength Elongation Reduction of area Impact value Standard
Mpa % J
1.2) Hardness:
Normalizing hardness of the rings is 187HB-241HB, quench & temper hardness is 229HB-269HB, hardness of the raceway after
quenching is 55HRC-62HRC.
1.3)hardening of slewing bearings
Single row four Double row ball Single row cross Double row Three row Double row
point contact bearing compress roller bearing ball bearing roller nose ball bearing
bearing raceway raceway raceway nose raceway raceway raceway
All teeth quenching tooth face and dedendum quenching tooth face quenching
a VLWL can be not required, surface round runout SDW should be in the range of twice standard.
3) Seal:
it is usually made of NBR, iron, felt, or other thing which meet the capability.
steel number comparison between China & other countries, follow form 4
Form 4 Slewing bearing material number comparison between China & Other countries.
Type China GB(YB) USSR гост USA AISI SAE U.K BS Japan JIS France NF Germany DIN
Material selection of slewing bearings: mainly based on working condition, size, capability required
Material selection of rolling element: GCr15SiMn is selected for larger size rolling element, GCr15 is selected for smaller size rolling
element.
Material selection of rings: steel 45# is for those which are low slewing speed, low precision & capability required. 50mn is for those
which are higher precision & capability required, 42CrMo is for those which are higher precision & capability, higher intensity or larger
size required.
5. Clearance of slewing bearings
The clearance of slewing bearings is mainly used to equalize the manufacture & setting errors, which is caused by slewing bearing’s
support part and application’s assembling part, in order to ensure the bearings right operation. It is listed in Form 5 ----- 8 with the data of
clearance, which is based on slewing bearing’s structure, tolerance grade, and rolling element’s diameter.
We also can supply slewing bearing with preload, 0 even minus clearance.
Form 5 Axial clearance of four point contact ball slewing bearing μm
Dpw Tolerance Grade
G E D
mm Axial Clearance
G E D
mm Axial Clearance
wechat:
2800
17702586093
4500 200
Skype:
440
youlite2016
100 300
QQ:2940894886
80 240
www.wcbearing.com
Form wenchen@wcbearing.com
7 Axial clearance of cross roller slewing bearing Whatsapp: +8617702586093
Dpw Tolerance Grade
G E D
mm Axial Clearance
G E D
mm Axial Clearance Radial Clearance Axial Clearance Radial Clearance Axial Clearance Radial Clearance
Exceed to Min Max Min Max Min Max Min Max Min Max Min Max
2800 4500 100 300 200 440 80 240 100 300 40 160 80 240
Holistic&partial cage or plastic Low temperature,normal temperature,wateriness Raceway Calcium base grease ZG-3, ZG-4, ZG-5
partition rubber seal 40℃~140℃ Gear Graphite& Calcium base grease ZG-S
Muti-genus partition High 40℃~140℃ Raceway Lithium base grease ZL-1, ZL-2
diameter of the hole a circles(L=1 hole distance)on the same circles(L=1 hole distance)on the reverse width roughness
0.00008L
0.00013L
0.00008L
0.0002L
0.0002L
1600 2500 300 200 120 150 100 60 3.2 2.5 1.25
2500 4000 400 250 150 200 120 80 3.2 2.5 1.25
4000 6300 500 300 200 250 150 100 3.2 2.5 1.25
Forced stress Section Pre-screwing Academic Torsional Pre-screwing Academic Torsional Pre-screwing Academic Torsional
Bolt area of area of tightness of bolt tightness moment tightness of bolt tightness moment tightness of bolt tightness moment Nm
M5 14.2 12.7 6400 6.1 5.5 9300 8.9 8.0 10900 10.4 9.3
M6 20.1 17.4 9000 10.4 9.3 13200 15.5 13.9 15400 18 16.2
M8 36.6 32.8 16500 258 22.5 24200 37 33 28500 43 38
M10 58 52.3 26000 51 45 38500 75 67 45000 87 78
M12 84.3 76.2 38500 87 78 56000 120 117 66000 150 135
M14 115 105 53000 140 126 77000 205 184 90000 240 216
M16 157 144 72000 215 193 106000 310 279 124000 370 333
M18 193 175 91000 300 270 129000 430 387 151000 510 459
M20 245 225 117000 430 387 166000 620 558 194000 720 648
M22 303 282 116000 580 522 208000 830 747 243000 970 873
M24 353 324 168000 740 666 239000 1060 954 280000 1240 1116
M27 459 427 221000 1100 990 315000 1550 1395 370000 1850 1665
M30 561 519 270000 1500 1350 385000 2100 1890 450000 2500 2250
M33 694 647 235000 480000 560000
M36 817 759 395000 560000 660000
M39 976 913 475000 670000 790000
M42 1120 1045 542000 772000 904000
Thread hydraulic tension
M45 1300 1224 635000 905000 1059000
set needed to use Thread hydraulic tension Thread hydraulic tension set
M48 1470 1377 714000 1018000 1191000
set needed to use needed to use
M52 1760 1652 857000 1221000 1429000
M56 2030 1905 989000 1408000 1648000
M60 2360 2227 1156000 1647000 1927000
Company Name:
Application
Inquired Quantity:
2
Load
3
Bearing Structure □ Three-row cylindrical roller combined bearing □ Cross roller bearing
Center Circle Diameter(mm) Quantity & Diameter of Mounting Hole Quantity&Diameter of Oil Hole
Outer Ring
Gear Pinion
Number of Teeth
Module
Tooth Width
Press Angle
Gear data
Modification Coefficient
Tolerance Grade
Addendum Coefficient
Target price:
Special require
Please give us the information as completely as possible, include a drawing (or sketch) of the application if available.
wechat:012.75(50).3150
17702586093 Skype: youlite2016 QQ:2940894886
010.75(50).3150 011.75(50).3150 013.75(50).3150 3376 2922 174 3286 3014 56 45 150 +0.5 20 3476 171 2828 142 2800
3150.60A 3342 2954 3346 2958 150 14 3276 3024 72 33 M30 56 22 122 3454 156 2838 13 2139 2129
3. www.wcbearing.com
Standard series HS (JB2300-78A) wenchen@wcbearing.com Whatsapp: +8617702586093
Single-Row ball slewing ring, featured in quadruple-loading-points, is suitable to be assemblied to the mechanical part of various
cranes,excavators,pile-driver, scaling-ladder of fire trucks and under ground engines.
Notes:Cross roller slewing rings, except type and diameter of their rolling object, are in accord with single-row slewing ring in their basic
data for same diameter of rolling center.
LU414.20 518 304 56 490 332 8 18 12 18 4 12 453 375 10.5 10.5 - - - - 23.4
LU544.20 648 434 56 620 462 10 18 14 18 - 4 12 583 505 10.5 10.5 - - - - 31.0
LU644.20 748 534 56 720 562 12 18 16 18 - 4 12 683 605 10.5 10.5 - - - - 36.4
LU744.20 848 634 56 820 662 12 18 16 18 - 4 12 783 705 10.5 10.5 - - - - 42.8
LU844.20 948 734 56 920 762 14 18 18 18 - 4 12 883 805 10.5 10.5 - - - - 47.8
LU944.20 1048 834 56 1020 862 16 18 20 18 - 4 12 983 905 10.5 10.5 - - - - 53.1
LU1094.20 1198 984 56 1170 1012 16 18 20 18 - 4 12 1133 1055 10.5 10.5 - - - - 61.9
LW414.20 504 304 56 455 332 10 M12 12 18 20 4 12 - 375 10.5 - 5 99 -0.1 45.5 29.3
LW544.20 640.8 434 56 585 462 14 M12 14 18 20 4 12 - 505 10.5 - 6 105 -0.1 45.5 39.5
LW644.20 742.8 534 56 685 562 16 M12 16 18 20 4 12 - 605 10.5 - 6 122 -0.1 45.5 47.6
LW744.20 838.8 634 56 785 662 18 M12 16 18 20 4 12 - 705 10.5 - 6 138 -0.1 45.5 53.5
LW844.20 950.4 734 56 885 762 18 M12 18 18 20 4 12 - 805 10.5 - 8 117 -0.1 45.5 65.1
LW944.20 1046.4 834 56 985 862 20 M12 20 18 20 4 12 - 905 10.5 - 8 129 -0.1 45.5 69.6
LW1094.20 1198.4 984 56 1135 1012 22 M12 20 18 20 4 12 - 1055 10.5 - 8 148 -0.1 45.5 83
LW955.30 1096.2 805 90 1016 845 30 M20 30 22 20 6 21 - 893 19 - 9 120 -0.1 71 165
LW1055.30 1198 905 90 1116 945 30 M20 30 22 40 6 21 - 993 19 - 10 118 -0.1 71 183
LW1155.30 1298 1005 90 1216 1045 36 M20 36 22 40 6 21 - 1093 19 - 10 128 -0.1 71 200
LW1255.30 1398 1105 90 1316 1145 42 M20 42 22 40 6 21 - 1193 19 - 10 138 -0.1 71 216
LW1355.30 1498 1205 90 1416 1245 42 M20 42 22 40 6 21 - 1293 19 - 10 148 -0.1 71 234
LW1455.30 1598 1305 90 1516 1345 48 M20 48 22 40 6 21 - 1393 19 - 10 158 -0.1 71 250
LN414.20 518 326.5 56 490 375 8 18 12 M12 20 4 12 453 - 10.5 - 5 67 -0.15 45.5 27.1
LN544.20 648 445.2 56 620 505 10 18 16 M12 20 4 12 583 - 10.5 - 6 76 -0.1 45.5 36.9
LN644.20 748 547.2 56 720 605 12 18 18 M12 20 4 12 683 - 10.5 - 6 93 -0.1 45.5 43.7
LN744.20 848 649.2 56 820 705 12 18 20 M12 20 4 12 783 - 10.5 - 6 110 -0.1 45.5 51.1
LN844.20 948 737.6 56 920 805 14 18 20 M12 20 4 12 883 - 10.5 - 8 94 -0.1 45.5 61.6
LN944.20 1048 841.6 56 1020 905 16 18 22 M12 20 4 12 983 - 10.5 - 8 107 -0.1 45.5 65.8
LN1094.20 1198 985.6 56 1170 1055 16 18 24 M12 20 4 12 1133 - 10.5 - 8 125 -0.1 45.5 80.7
LN1155.30 1300 1012 90 1260 1094 36 22 36 M20 40 6 21 1217 - 19 - 10 103 -0.1 71 192
LN1255.30 1400 1112 90 1360 1194 42 22 42 M20 40 6 21 1317 - 19 - 10 113 -0.1 71 208
LN1355.30 1500 1212 90 1460 1294 42 22 42 M20 40 6 21 1417 - 19 - 10 123 -0.1 71 226
wechat:
1600 17702586093
LN1455.30 1312 90 1560 1394 48 22 Skype:
48 M20 youlite2016
40 6 21 1517 - 19 - 10 QQ:2940894886
133 -0.1 71 243
www.wcbearing.com wenchen@wcbearing.com Whatsapp: +8617702586093
Single-row cross roller slewing ring
1. Standard series 11 (JB/T2300-1999)
The single-row crossed roller slewing ring is composed of two seatings. It features compact in design, light in weight,high precision and
small forting clearance. As the rollers are 1:1 cross arranged, it is suitable for high precision mounting and capable to bear axial force,
resultant moment and considerable large radial force.
Notes:1. n1-number of lubricating holes,evenly distributed,lubricating nipple M10×1 JB/T7940.1-TB7940.2
2. Mounting hole n-dn1,n-dn2,may be replaced with screw hole,tooth width may be taken as H-h.
JN, Ext tooth Int tooth Hole A Worm hole B/C/D Ext tooth x=-0.5 Int tooth x=+0.5
H Du Dn n L m
JU D dn D dn Φ d1 T da mm Z kg da mm Z kg
Basic type Configuration size Mounting size Gear data Ext gear Int gear
Weight kg
toothless Ext tooth Int tooth D mm d mm H mm D1 mm D2 mm n dn1 dn2 b mm X m mm De mm Z mm De mm Z
1000.20 1156 854 1146 844 128 1106 906 1094 894 28 26 M24 45 98 +0.5 10 1210 118 790 80 426 418
1120.20 1280 974 1266 964 128 1226 1026 1214 1014 30 26 M24 45 98 +0.5 12 1344 109 900 76 478 470
1250.20 1410 1104 1396 1094 128 1356 1156 1344 1144 36 26 M24 45 98 +0.5 12 1476 120 1032 87 540 524
1400.20 1560 1254 1546 1240 128 1506 1306 1494 1294 36 26 M24 45 98 +0.5 14 1638 114 1162 84 626 614
1600.20 1760 1454 1746 1444 128 1706 1506 1694 1494 40 26 M24 45 98 +0.5 14 1834 128 1372 99 708 686
1600.25 1790 1418 1782 1400 148 1726 1484 1716 1474 32 33 M30 56 110 +0.5 14 1862 130 1330 96 992 966
1800.25 2000 1618 1982 1600 148 1926 1684 1916 1674 36 33 M30 56 110 +0.5 16 2080 127 1520 96 1121 1096
2000.25 2190 1818 2182 1810 148 2126 1884 2116 1874 44 33 M30 56 110 +0.5 16 2272 139 1728 109 1211 1196
2240.25 2430 2058 2422 2040 148 2366 2124 2356 2114 48 33 M30 56 110 +0.5 18 2520 137 1944 109 1373 1396
2500.25 2700 2318 2682 2310 148 2626 2384 2616 2374 54 33 M30 56 110 +0.5 18 2790 152 2214 124 1561 1532
2240.32 2464 2022 2458 2000 182 2394 2100 2380 2086 40 39 M36 66 130 +0.5 18 2556 139 1908 107 1968 2002
2500.32 2730 2282 2718 2270 182 2654 2360 2640 2346 44 39 M36 66 130 +0.5 18 2826 154 2178 122 2245 2199
2800.32 3040 2580 3018 2560 182 2954 2660 2940 2646 48 39 M36 66 130 +0.5 20 3140 154 2460 124 2566 2526
3150.32 3380 2932 3368 2920 182 3304 3010 3290 2996 56 39 M36 66 130 +0.5 20 3480 171 2820 142 2316 2788
2800.40 3040 2562 3038 2560 220 2962 2640 2960 2638 56 39 M36 66 160 +0.5 20 3140 154 2460 124 3264 3213
3150.40 3380 2912 3388 2910 220 3312 2990 3310 2988 64 39 M36 66 160 +0.5 22 3498 156 2794 128 3740 3683
3550.40 3780 3312 3788 3300 220 3712 3390 3710 3388 72 39 M36 66 160 +0.5 22 3894 174 3190 146 4175 4171
4000.40 4240 3762 4238 3750 220 4162 3840 4160 3838 84 39 M36 66 160 +0.5 24 4368 179 3624 152 4801 4810
3150.50 3430 2884 3416 2870 268 3340 2974 3326 2960 56 45 M42 80 190 +0.5 24 3552 145 2736 115 5176 5072
3550.50 3840 3284 3816 3270 268 3740 3374 3726 3360 64 45 M42 80 190 +0.5 24 3960 162 3144 132 5798 5816
4000.50 4290 3734 4266 3720 268 4190 3824 4176 3810 72 45 M42 80 190 +0.5 24 4416 181 3600 151 6544 6512
WCB can supply the slewing rings used in the standard excavator, only give us the machine number is OK.
And we have most of the slewing rings used in the list above in stock.
For the one not list, please contact with us to check the availability.
wechat: 17702586093 Skype: youlite2016 QQ:2940894886
www.wcbearing.com wenchen@wcbearing.com Whatsapp: +8617702586093
Forged Rings for Slewing Rings
WCB also can supply you the forging rings used to manufacture the slewing rings and bearings.
Chemical analysis
Steel C Si Mn P S Cr Mo Ni Cu
50Mn 0.48~0.56 0.17~0.37 0.70~1.00 ≤0.035 ≤0.035 ≤0.25 — ≤0.30 ≤0.20
42CrMo 0.38~0.45 0.17~0.37 0.50~0.80 ≤0.035 ≤0.035 0.90~1.20 0.15~0.25 — —
45 0.42~0.50 0.17~0.37 0.50~0.80 ≤0.035 ≤0.035 ≤0.25 — ≤0.30 ≤0.20
* or other materials as required by customers
Mechanical properties
Steel Grade Tensile Strength σb Yield Point σs Elongation δ5 Shrinkage ψ Impact Aku2
GB/T 699-1999
≥645MPa ≥390MPa ≥13% ≥40% ≥31J
50Mn
GB/T 699-1999
≥1080MPa ≥930MPa ≥12% ≥45% ≥63J
42CrMo
GB/T 699-1999
≥600MPa ≥355MPa ≥16% ≥40% ≥39J
45
GB/T 699-1999
— AISI1053 SL,SM
50Mn
GB/T 699-1999
42CrMo4 4140 42CrMo4
42CrMo
GB/T 699-1999
C45E AISI1045 C45E4
45
WCB can supply the fastening bolts for the slewing ring bearings for mounting. We can produce as customer requirement, according
to the bolt grade. Normally the bolts for mounting the slewing rings need very strong abilities. Normally the bolts can use the same
material as the slewing ring bearings, or also can use others as requires.And we can do some coat on the surface of the bolts.
Pinion
We can produce the match pinion of slewing rings according to the spec. If customers purchase pinion together with slewing rings, that
can be better it matching work, and make your purchasing easily and all solved by WCB. We also can provide fastening bolts for
the slewing rings.
Before repair
After repair 5, After receiving, we may clean, measure and give you the
detailed test report and exact cost.
Dimensions parameters
External dimensions Installation dimensions Mounting hole data
Model L1 L2 L3 H1 H2 D1 D2 D3 D4 D5 n1 M1 T1 T2 n2 M2 T3
mm Inner ring Outer ring
S7 183 182 132.7 78.5 63.4 145 120.6 98 163 203.2 10 M12 25 45 8 M12 25
S9 296 322 174.15 102.7 89.3 204 175 145 222.5 270 15 M16 30 65 16 M16 30
S12 485 331 220 113 89.4 289 259 229 308.5 358 19 M16 30 69.4 18 M16 30
S14 520 337 237.6 113 89.1 325 295 265 342.5 390 23 M16 30 69 18 M16 30
S17 601 385 275.3 123 103.1 406 365.1 323.9 422.1 479.4 20 M16 32 79 20 M16 32
S21 723 469 339 130.2 137 533 466.7 431.8 525.5 584.2 35 M20 40 91 36 M20 40
S25 848 469 401.8 133.3 130 628 565 512 620 675 35 M20 40 87 36 M20 40
Performance parameters
Model Rated output Tilting moment Axial load Radial load Holding torque Gear Tracking Self-lockin Weight
torque (kN.m) torque (kN.m) (kN) (kN) (kN.m) ratio precision g gears (kg)
S7 1.5 13.5 133 53 10.4 73:1 ≤0.20 Yes 18
S9 6.5 33.9 338 135 38.7 61:1 ≤0.20 Yes 42
S12 7.5 54.3 475 190 43 78:1 ≤0.20 Yes 48
S14 8 67.8 555 222 48 85:1 ≤0.20 Yes 55
S17 10 135.6 976 390 72.3 102:1 ≤0.15 Yes 87
S21 15 203 1598 640 105.8 125:1 ≤0.15 Yes 142
S25 18 271 2360 945 158.3 150:1 ≤0.15 Yes 195
Dimensions parameters
External dimensions Installation dimensions Mounting hole data
model L1 L2 L3 H1 H2 D1 D2 D3 D4 D5 D6 n1 M1 T1 T2 n2 M2 T3 T4
mm Inner ring Outer ring
SE3/ PE3/ ZE3 190 157 80 94.5 97.5 126 100 - - 100 115 6 M10 17 32 6 M10 17 -
SE5/ PE5/ ZE5 228 173 100.1 107.5 119 140 100 - - 128 146 6 M10 18 33 6 M10 20 -
SE7/ PE7/ ZE7 295 185 132.7 76.5 80.8 145 120.6 98 163 203.2 237.5 10 M12 25 45 8 M12 25 42.4
SE9/ PE9/ ZE9 408 314 174.2 102 108 204 175 145 222.5 270 316 15 M16 30 65 16 M16 30 53
SE12/ PE12/ ZE12 498 324 220 106 110.5 289 259 229 308.5 358 402 19 M16 30 69.4 18 M16 30 51
SE14/ PE14/ ZE14 533 330 237.6 106 110 325 295 265 342.5 390 435.5 23 M16 30 69 18 M16 30 51
SE17/ PE17/ ZE17 578 378 282.55 212 126 406 365.1 324 425 479.4 522 20 M16 32 79 20 M16 32 55
SE21/ PE21 737 462 339.1 133 136.5 533 466.7 431.8 525.5 584.2 618 35 M20 40 91 36 M20 40 -
SE25/ PE25 863 462 401.8 133 130 628 565 512 620 675 744 35 M20 40 87 36 M20 40 -
Performance parameters
Model Rated output Tilting moment Axial load Radial load Holding Gear Tracking precision Weight
torque (kN.m) torque (kN.m) (kN) (kN) torque (kN.m) ratio (kg)
SE3 0.4 1.1 30 16.6 2 62:1 ≤0.2 12
PE3 0.4 1.1 30 16.6 2 62:1 ≤0.08, ≤0.12, ≤0.15 12
ZE3 0.24 1.1 30 16.6 2 62:1 0 12
SE5 0.6 3 45 22 5.5 62:1 ≤0.2 20
PE5 0.6 3 45 22 5.5 62:1 ≤0.08, ≤0.12, ≤0.15 20
ZE5 0.36 3 45 22 5.5 62:1 0 20
SE7 1.5 13.5 133 53 10.4 73:1 ≤0.2 21
PE7 1.5 13.5 133 53 10.4 73:1 ≤0.05, ≤0.07, ≤0.11 21
ZE7 0.6 13.5 133 53 10.4 73:1 0 21
SE9 6.5 33.9 338 135 38.7 61:1 ≤0.17 49
PE9 6.5 33.9 338 135 38.7 61:1 ≤0.05, ≤0.07, ≤0.09 49
ZE9 3.9 33.9 338 135 38.7 61:1 0 49
SE12 7.5 54.3 475 190 43 78:1 ≤0.17 61
PE12 7.5 54.3 475 190 43 78:1 ≤0.03, ≤0.05, ≤0.07 61
ZE12 4.5 54.3 475 190 43 78:1 0 61
SE14 8 67.8 555 222 48 85:1 ≤0.17 64
PE14 8 67.8 555 222 48 85:1 ≤0.03, ≤0.05, ≤0.07, ≤0.09 64
ZE14 4.8 67.8 555 222 48 85:1 0 64
SE17 10 135.6 970 390 72.3 102:1 ≤0.15 105
PE17 10 135.6 970 390 72.3 102:1 ≤0.03, ≤0.05, ≤0.07, ≤0.09 105
SE21 15 203 1598 640 105.8 125:1 ≤0.15 149
PE21 15 203 1598 640 105.8 125:1 ≤0.03, ≤0.05, ≤0.07, ≤0.09 149
SE25 18 271 2360 945 158.3 150:1 ≤0.15 204
PE25 18 271 2360 945 158.3 150:1 ≤0.03, ≤0.05, ≤0.07, ≤0.09 204
Dimensions parameters
External dimensions Installation dimensions Mounting hole data
Model L1 L2 L3 H H1 H2 D1 n1 M1 n2 M2
mm Inner ring Outer ring
S14-2 338 237.6 302 110 59 11.5 325 23 M16 18 M16
SE14-2 338 237.6 302 110 59 11.5 325 23 M16 18 M16
S17-2 385 275.3 340.5 126 66 7.5 406 20 M16 20 M16
SE17-2 385 275.3 340.5 126 66 7.5 406 20 M16 20 M16
Performance parameters
Rated output Tilting moment Axial load Radial load Holding torque Gear Tracking precision Weight
Model torque (kN.m) torque (kN.m) (kN) (kN) (kN.m) ratio (kg)
S14-2 12 67.8 555 222 48 85:1 ≤0.17 62
SE14-2 12 67.8 555 222 48 85:1 ≤0.17 76
S17-2 16.8 135.6 970 390 72.3 102:1 ≤0.15 102
SE17-2 16.8 135.6 970 390 72.3 102:1 ≤0.15 119
Dimensions parameters
External dimensions Installation dimensions Mounting hole data
Model L1 L2 H D1 D3 D3 D4 D5 n1 M1 n2 M2
mm Inner ring Outer ring
HSE21-2 487 368 145 525 465 425 584 622 23 M18 24 M16
HSE25-2 511 416 148 628 560 512 685 722 29 M18 30 M16
Performance parameters
Rated output Tilting moment Axial load Radial load Holding torque Gear Tracking precision Weight
Model torque (kN.m) torque (kN.m) (kN) (kN) (kN.m) ratio (kg)
HSE21-2 43.6 52.3 1058 421 167 82:1 ≤0.15 206
HSE25-2 50 60 2360 945 271 94:1 ≤0.15 275
Dimensions parameters
External dimensions Installation dimensions Mounting hole data
Model L1 L2 L3 H D1 D2 D3 D4 D5 n1 M1 n2 M2
mm Inner ring Outer ring
HSE21 487 268 438 145 425 465 584 622 525.5 23 M30 24 M16
HSE25 511 416 486 148 512 560 685 722 628 29 M30 30 M16
Performance parameters
Rated output Tilting moment Axial load Radial load Holding torque Gear Tracking precision Weight
Model torque (kN.m) torque (kN.m) (kN) (kN) (kN.m) ratio (kg)
HSE21 21.8 26.6 1058 421 167 82:1 ≤0.15 186
HSE25 25 30 2360 945 271 94:1 ≤0.15 255
Dimensions parameters
External dimensions Installation dimensions Mounting hole data
Model L1 L2 L3 L4 H1 H2 H3 H4 H5 D1 D2 D3 D4 D5 D6 n1 M1 n2 M2
mm Inner ring Outer ring
WE9 340 177.5 241.5 170 97 82 12 26 41 260 175 145 222 270 325 15 M16 16 M16
WE14 380 237.5 301.5 190 97 82 12 26 41 380 295 265 342 390 445 18 M16 23 M16
WE17 405 285 349 202.5 97 82 12 23 41 460 365 332 430 479.5 535 20 M16 20 M16
WE21 482.5 350 415 245 120 130 25 45 65 550 465 425 526 584 632 23 M20 24 M20
Performance parameters
Model Rated output Tilting moment Axial load Radial load Holding torque Gear Tracking precision Weight
torque (kN.m) torque (kN.m) (kN) (kN) (kN.m) ratio (kg)
WE9 8 33.9 550 205 38.7 62:1 ≤0.15 48.5
WE14 28.7 203 1598 596 105.8 90:1 ≤0.1 169
WE17 12.96 135.6 1110 414 72.3 104:1 ≤0.1 90
WE21 10.8 67.8 920 343 48 86:1 ≤0.13 68
Input
Input
Input
Input Input
Input Input
Input
Input
尺寸 size (mm)
电压 电流 减速比 输出转速 额定输出扭矩
Voltage(V) Current(A) Gear Ratio Output Speed(rpm) Rated Output Torque
L D
24 (H) /77/35 24 < 2.8 234 7.7 35 N.m (26 lbf.ft) 240 (275) 64
24 (H) /50/100 24 < 4.8 329 5 100 N.m (74 lbf.ft) 253 (253) 82
电压 电流 减速比 转速 额定输出扭矩
Voltage(V) Current(A) Gear Ratio Speed(rpm) Rated Output Torque
wechat: 17702586093
380/15/90 380 Skype: youlite2016
< 0.2 40 1.5 QQ:2940894886
90 N.m ( 66 lbf.ft )
回 转 式 减 速 器 专 业 制 造 商
Professional Slewing Drive Manufacturer P-23
www.wcbearing.com wenchen@wcbearing.com Whatsapp: +8617702586093
5. Installation adjustment& attentions in operation for slew drive
1. Slew drive must be installed on a hard horizontal surface, and the bolts of the firm steps must be tightened in case of loosen and
abnormal vibration; remove painting residues, burr and extraneous material to make sure installing datum plane and bracket surface flat.
To prevent local overload of slew drive and ensure its flexible running, mounting bracket shall be eliminated internal stress and done
mechanical treatment after welding processes. Flatness(including horizontal angle deviation) should be controlled in a certain range.
2. The special bolts size for slew drive should be in keeping with the standard GB/T5782-2000 and GB/T5783-2000 of the People’s
Republic of China, the bolts strength grade should reach the national standard GB/T3098.1-2000 regulations of grade 8.8.
(1) washer size should be in keeping with the standard GB/T1230-2006 and standard GB/T123-2006. Spring washer is not used; the
washer should be required quenching and tempering and selected correct strength grade based on the load of slew drive.
(2) Nut size should be in keeping with the standard GB/T6170-2000 and standard GB/T6175-2000 of the People’s Republic of China.
The mechanical properties should be in keeping with the national standard GB/T3098.2-200 regular of the People’s Republic of China.
(3) Tighten bolts should be pre load tightening force according to mainframe design rules, unless there are special provisions, general
tightening force for pre loading should be 70% of bolt yield limit, screw thread is allowed to oil in small quantity when it is tightened.
Bolts clamping length LK≥5d (d stand for the bolt diameter).
Bolts Threaded Threade Clamp Theoretic Actual Clamp Theoretic Actual Clamp Theoretic Actual
spec. effective d force al preload force al preload force al preload
area minimu predictio torque predictio torque predictio torque
m area n torque MA=0.9 n torque MA=0.9 n torque MA=0.9
As(mm 2) As(mm2 ) Fsp(N) Msp(Nm) Msp(Nm) Fsp(N) Msp(Nm) Msp(Nm) Fsp(N) Msp(Nm) Msp(Nm)
M8 36.6 32.8 16500 25 22.4 23200 35 31.5 27900 41 36
M10 58 53.3 26200 49 44 36900 69 62 44300 83 75
M12 84.3 76.2 38300 86 77.5 54000 120 110 64500 145 130
M14 115 105 52500 135 120 74000 190 170 88500 230 210
M16 157 144 73000 210 190 102000 295 265 123000 355 320
M18 192 175 88000 290 260 124000 405 365 148000 485 435
M20 245 225 114000 410 370 160000 580 520 192000 690 620
M22 303 282 141000 550 500 199000 780 700 239000 930 840
M24 353 324 164000 710 640 23000 1000 900 276000 1200 1080
In order to avoid the deviation between the bolt locking force, please pay attention to the following items:
� Oil the screw thread and head in small quantity to ensure to resist the unified friction (adhesives are not used).
� Preload to the bolt including the washer, if necessary, in 3 steps with 30% 80% 100%.
For hydraulic motor, the preload clamping force con not exceed 90% of the finished product.
3. After installation, clear dust and dirt on the slew ring in time, paint the exposed part with antirust paint and adjust power source.
A B C D E F h H d Weight
Spec
mm mm mm mm mm mm mm mm mm kg
A B C D E F h H d Weight
Spec
mm mm mm mm mm mm mm mm mm kg
A B C D E F N H d1 d2 Weight
Spec
mm mm mm mm mm mm mm mm mm mm kg
UA1208DB 1195 1208 1160 1175 1079 1042 17 94 22.225 15.875 118
UA1110DB 1102 1110 1060 1074 975 940 15 90 22.225 15.875 100
A B C D E F h H d Weight
Spec
mm mm mm mm mm mm mm mm mm kg
A B C D E F N H d1 d2 Weight
Spec
mm mm mm mm mm mm mm mm mm mm kg
UT1100DB 1100 1100 1070 1070 930 930 19 84 15.875 15.875 114
A B C D E F N H d1 d2 d3 Weight
Spec
mm mm mm mm mm mm mm mm mm mm mm kg
UT1100TB 1100 1100 1070 1070 902 910 25 106 15.875 15.875 15.875 158
A B C D E F h H d Weight
Spec
mm mm mm mm mm mm mm mm mm kg
A B C D E F h H d Weight
Spec
mm mm mm mm mm mm mm mm mm kg
For the number not list above, please contact with us.
Research center
The gear and CNC-controlled equipment institute, including processional, senior engineers and senior technical staffs, demonstrates
independent innovation capabilities of spiral bevel gear. The center offers full of consultation service including design, calculation of
load capability, installation specifications and drawings etc for spiral bevel gear.
Finished project:
1.CNC-controlled spiral bevel gear machine with flinger shaped profile formate milling cutter .
2.CNC-controlled spiral bevel gear hard-face shaving machine of max diameter 2000mm max module 45mm and φ400mm axial
diameter of pinion workpiece box.
3.21 inch to 50 inch cutters with cutter blades.
4.Φ2300mm roller tester with φ400mm axial diameter of pinion workpiece box
On-going project:
1.CNC-controlled spiral bevel gear hard-face shaving machine with max diameter φ2700mm
2.Φ3000mm roll tester with φ500mm axial diameter of pinion workpiece box.
Working areas
○3 Roughness: Ra0.2
○2 Module: 2mm--18mm
Inspection
Main Product
Our main product is medium and large size spiral bevel gears
Most of the product we produce according to custom drawing and specification.
Shaving Bevel Gear of Hard Face Grinding Bevel Gear of Hard Face Planetary Reducer Rotary Table for Oil Field
(Hardness HRC58-62) (Hardness HRC58-62)
Applications
Our product widely used in the well rig for oil field, High-speed wire finishing mill, marine propeller, coal mining machine, cement mill,
railway locomotive, large-scale construction machinery, large scale precision reducer and so on.
A spur gear has a cylindrical pitch surface with teeth that are parallel to the axis. Spur Gears are widely used in kinds of application. We
can do the shaping, hobbing and grinding, the max size we can do is 6000mm.
2. Helical Gears
Helical gears have teeth that are cut at an angle. During the engagement of the teeth, contact begins at one end of the tooth, and then
spreads gradually throughout rotation, until full mesh is achieved. The teeth of the helical gears then gradually exit mesh in the
same manner.WCB max size for helical gears is 2000mm.
3. Worm Gears
A worm gear is used when a large speed reduction ratio is required between crossed axis shafts which do not intersect. A basic helical
gear can be used but the power which can be transmitted is low. A worm drive consists of a large diameter worm wheel with a
worm screw meshing with teeth on the periphery of the worm wheel. WCB max size for worm gears is 2000mm.
Spiral bevel gears are used to transmit power between shafts that are at a 90-degree orientation to each other. Spiral bevel gears have
teeth that are curved and oblique.It is used in the oil fields, mining, metallurgy and marine fields.The max size we made is 2000mm.
5. Bevel Gear Sets
Spiral bevel gear sets are most commonly used to transmit power between shafts that are at a right angle or 90 degree orientation to each
other, although almost any shaft angle is possible. With these gears, the gear teeth gradually enter into mesh during rotation until
maximum mesh is achieved, The teeth then leave mesh in the same manner.
6. Gear Shaft
The gear shaft is the axle of the gear, providing the rotation that allows one gear to engage with and turn another. Through the gears and
shafts in an automobile transmission, the engine is able to run at a constant speed, while the auto wheels can be run faster or slower, or
even in reverse, using the same engine rotational direction and speed.
7. Gear Box
Gearbox uses gears and gear trains to provide speed and torque conversions from a rotating power source to another device.
APPLICATION