Professional Documents
Culture Documents
Práctica N°2 y 3
5. Una barra de bronce se sujeta entre una barra de acero y
ESFUERZOS y DEFORMACION una barra de aluminio como se muestra en la Fig. P son
las cargas axiales se aplican en las posiciones indicadas.
Encuentra el mayor valor de P que
no excederá una deformación total de 3.0 mm,
1. A steel wire 30 ft long, hanging vertically, supports a o las siguientes tensiones:
load of 500 lb. Neglecting the 140 MPa en el acero, 120 MPa en el bronce y 80 MPa
weight of the wire, determine the required diameter if en el aluminio.
the stress is not to exceed 20 ksi and the total elongation Suponga que el conjunto está adecuadamente arriostrado
is not to exceed 0.20 in. Assume E = 29 × 106 psi.. para evitar pandeo. Utilice E.acero = 200 GPa, E.
aluminio = 70 GPa y E.bronce = 83 GPa.