Professional Documents
Culture Documents
com Page 1 of 12
It can have a moderately low tensile strength and has a moderately low thermal
conductivity among wrought carbon or non-alloy steels.
The properties of EN 1.0038 steel include two common variations. This page
shows summary ranges across both of them. For more specific values, follow the
links immediately below. The graph bars on the material properties cards further
below compare EN 1.0038 steel to: wrought carbon or non-alloy steels (top), all
iron alloys (middle), and the entire database (bottom). A full bar means this is the
highest value in the relevant set. A half-full bar means it's 50% of the highest,
and so on.
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 2 of 12
Mechanical Properties
Brinell Hardness
110 to 120
Elongation at Break
23 to 25 %
Fatigue Strength
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 3 of 12
28 to 31 J 21 to 23 ft-lb
Poisson's Ratio
0.29
Shear Modulus
Shear Strength
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 4 of 12
Thermal Properties
Latent Heat of Fusion
250 J/g
400 °C 750 °F
1460 °C 2660 °F
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 5 of 12
1420 °C 2590 °F
Thermal Conductivity
49 W/m-K 28 BTU/h-ft-°F
Thermal Expansion
12 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
7.2 % IACS
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 6 of 12
8.3 % IACS
Otherwise Unclassified
Properties
Base Metal Price
2.1 % relative
Density
Embodied Carbon
Embodied Energy
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 7 of 12
Embodied Water
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
72 to 88 MJ/m3
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 8 of 12
13 points
24 points
13 to 15 points
15 to 16 points
Thermal Diffusivity
13 m2/s
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 9 of 12
12 to 13 points
Alloy Composition
Iron (Fe) 97.1 to 100
All values are % weight. Ranges represent what is permitted under applicable
standards.
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 10 of 12
Followup Questions
Similar Alloys
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 11 of 12
Further Reading
EN 10025-2: Hot rolled products of structural steels - Part 2: Technical delivery
conditions for non-alloy structural steels
EN 10250-2: Open die steel forgings for general engineering purposes - Part 2:
Non-alloy quality and special steels
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015
User Survey
This survey is up for a limited time. You don't have to answer all the questions —
any feedback is greatly appreciated!
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018
EN 1.0038 (S235JR) Non-Alloy Steel :: MakeItFrom.com Page 12 of 12
Submit
Copyright 2009-18: Disclaimer and Terms. Current page last modified on 2018-
10-18.
https://www.makeitfrom.com/material-properties/EN-1.0038-S235JR-Non-Alloy-Steel 11/14/2018