Professional Documents
Culture Documents
6. Working Pressure
Projects Currently Hence,
7. Support Span
WP x D 8. Deformations
Piping e Book T=
9. Valves
(2 f E – WP)
Structural e book 10. Gages
Where,
T = minimum required thickness, mm
WP = working pressure, kg / sq mm (g)
D = tube outside diameter, mm
f = tube metal allowable stress, kg / sq mm
C = 0.75 mm when WP = 70 kg / sq cm (g) and lower
= 0.0 mm when WP = above 70 kg / sq cm (g)
http://3d-labs.com/6_Working_Pressure.htm 1/2
9/24/2018 Working Pressure | IBR Formula for the shell of Headers and Drums (IBR-270, 1950) | IBR Formula for straight Tubes (IBR-338,1950) | I…
T= WP x D + C
(2 f E – WP)
Where,
T = minimum required thickness, mm
WP = working pressure, kg / sq mm (g)
D = tube outside diameter, mm
f = tube metal allowable stress, kg / sq mm
E = joint efficiency
C =0.75 mm
http://3d-labs.com/6_Working_Pressure.htm 2/2