Professional Documents
Culture Documents
姫 戸
線
路
神
KPM
道
Tel.(078)991-1133 Fax.(078)991-3186 路
速
北
JR Shinkansen Line 高
速
高 神
神 線 名
東 京 支 社 東京都港区浜松町2丁目4-1(世界貿易センタービル) 〒105-6116 阪 新幹 新大阪
山陽
Shin-Osaka Sta.
Tel.(03)3435-6862 Fax.(03)3435-2023 土
第
二
神
Shin-Kobe Sta.
山 明 新神戸
道
路
神 戸 支 社 神戸市中央区東川崎町1丁目1-3(神戸クリスタルタワー) 〒650-8680 神戸
大
阪
Nishi-Akashi Sta. 阪神高速4号湾岸線
西 部 営 業 部 Tel.(078)360-8605 Fax.(078)360-8609 西明石
阪神高速3号神戸線
兵
明石
舶 装 営 業 部 Tel.(078)360-8608 Fax.(078)360-8609 Akashi Sta.
山陽本線
庫
舞 Line
JR Sanyo
東京サービスセンター 千葉県市川市鬼高4丁目9-2 〒272-0015 子
西明石
Nishi-Akashi Sta.
明石
Akashi Sta.
産業車両用
234, Matsumoto, Hasetani-cho, Nishi-ku, Kobe 651-2239, Japan
Phone: 81-78-991-1133 Fax: 81-78-991-3186
Tokyo Office
World Trade Center Bldg., 4-1, Hamamatsu-cho 2-chome, Minato-ku, Tokyo
斜板形アキシャルピストンポンプ
105-6116, Japan
Phone: 81-3-3435-6862 Fax: 81-3-3435-2023
Kobe Office
(オープン回路用)
Kobe Crystal Tower, 1-3, Higashikawasaki-cho 1-chome, Chuo-ku, Kobe,
650-8680, Japan
Phone: 81-78-360-8605 Fax: 81-78-360-8609
http://www.khi.co.jp/kpm/
OVERSEAS SUBSIDIARIES
Swash-plate Type Axial Piston Pumps
Kawasaki Precision Machinery (UK) Ltd. for Open Circuits in Industrial Vehicles
Ernesettle Lane, Ernesettle, Plymouth, Devon PL5 2SA, United Kingdom
Phone: 44-1752-364394 Fax: 44-1752-364816
http://www.kpm-eu.com
Kawasaki Precision Machinery (U.S.A.), Inc.
5080, 36th Street S.E. Grand Rapids, Michigan 49512 U.S.A.
Phone: 1-616-949-6500 Fax: 1-616-975-3103
http://www.kawasakipmd.com
Kawasaki Precision Machinery (Suzhou) Ltd.
9 Guanshan Rd., New District, Suzhou, 215151 China
Phone: 86-512-6616-0365 Fax: 86-512-6616-0366
Flutek, Ltd.
192-11, Shinchon-dong, Changwon, Kyungnam, 641-370 Korea
Phone: 82-55-286-5551 Fax: 82-55-286-5553
Flutek, Ltd.
Marine Machinery Factory
79-2, Samga-ri, Bongsu-myeon, Uiryeong-gun, Kyungnam, 636-951
Republic Korea
Phone: 82-55-574-5744 Fax: 82-55-574-5714
● このカタログに記載の内容は、改良のため予告なく改訂・変更する場合があります。
1 2
斜板形アキシャルピストンポンプの豊富なバリエーションの中 から、建設機械に最適なオープン回路用ポンプをご紹介します。
Out of a Wide Variety of Our Swash Plate Type Axial Piston Pumps, We Introduce below Those Most Suitable for Construction Machines with Open Circuits.
KPMの産業車両用斜板形アキシャルピストンポンプ 徹底した機能設計が、これだけの魅力を生み出しました
KPM Swash Plate Type Axial Piston Pumps Programs for Industrial Vehicles A Thorough Function Desigh Enabled Such Atractive Features
押しのけ容積 タンデム形ダブルポンプ パラレル形ダブルポンプ シングルポンプ
displacement double pump (tandem type) double pump (parallel type) single pump 1. 高出力密度 1. High Power Density
半円筒形の斜板の採用によって、 高圧化と軽量・コンパク A lighter and more compact machine with higher
60 cm3 ト化をはかり、 出力密度
(単位質量あたりの出力) を増加させ pressure rating and increased power density (output
K3V63DT K3V63DTP K3V63S/K5V80S power/mass) was obtained by adopting a half log type
/K5V80DT /K5V80DTP ました。また、タンデム形ダブルポンプは、動力分割用ギヤボッ swash plate.
クスをなくして伝達効率の向上と軽量化をはかっています。 In particular, the double pump with its tandem
arrangement, has eliminated a power divider, has an
80
2. 高効率・高自吸能力 increased transmission efficiency, and is lighter.
球面形弁板の採用と油圧バランスの改良により、安定し 2. High Efficiency and Large Self-Priming Capability
たシリンダの回転姿勢が得られるため、低圧・低傾転域ま The spherical valve plate and improved hydraulic balance
で、高い効率が得られます。 provide stable cylinder rotation, thus achieving high
K3V112DT K3V112DTP efficiency even in a low-pressure and low-speed
/K5V140DT /K5V140DTP K3V112DP operating range.
110 K3V112S/K5V140S 3. 長寿命
高負荷容量の主軸受と、シューの摩耗を補正するピスト 3. Long Life
ン・リターンメカニズムの採用により、長寿命化をはかって A long life is obtained by adopting main bearings of large
capacity and the piston-return mechanism that
います。 compensates for the wear of the shoe.
140
K3V140DT K3V140DTP K3V140S 4. 低騒音 4. Low Noise
ケーシング剛性および弁板設計の改善などによって、 Even less noise has been achieved because of the
optimum design of the valve plate and the casing rigidity.
いっそうの低騒音化を実現しました。
5. Wide Range of Controls
160 5. 豊富な制御方式 The pump can be controlled in various kinds of control
機械・油圧・電気を入力とする各種制御方式が可能です。 methods and is capable of responding to either
K5V160DP K5V160S mechanical, hydraulic or electrical input.
K5V160DT K5V160DTP
K5V200DTH K5V200SH
K5V200DPH
K3V280S
K5V200DPH
K3V280DTH (PTO 付 / with PTO)
280
K3V280SH
3 4
SERIES SERIES
K3Vシリーズポンプは、長年の豊富な経験と実績に基づく高出 K3Vシリーズの信頼性を踏襲するとともに、さらに新技術の適
力密度、高効率、高信頼性を向上、徹底した機能設計を追求し 用によって、高出力密度を達成しています。
た建設機械用片傾転専用ピストンポンプです。 With new technology the K5V series has enabled increased
power density.
K3V series pump has optimum functuon design and is
provided with improved power density, efficiency, and reliability, •K3V/K5V 押しのけ容積バリエーション
attained from our many years of experiences. Variation of pump displacement
K5V
K5V80 K5V140 K5V160 K5V200
0 50 100 150 200 250 300
押しのけ容積 displacement (cm 3)
レギュレータコード レギュレータコード
押しのけ容積 押しのけ容積
regulator code regulator code
displacement displacement
63 : 63 cm3 回転方向 80 : 80cm3 回転方向
112 : 112 cm3 direction of rotation 140 : 140cm3 direction of rotation
140 : 140 cm3 R : 右回転 clockwise 160 : 160cm3 R : 右回転 clockwise
280 : 280 cm3 L : 左回転 counterclockwise 200 : 200cm3 L : 左回転 counterclockwise
DT: タンデム形ダブルポンプ 軸端より見て 軸端より見て
viewed from shaft end DT: タンデム形ダブルポンプ viewed from shaft end
tandem type double pump 設計番号 tandem type double pump 設計番号
DP: パラレル形ダブルポンプ desigh code DP: パラレル形ダブルポンプ desigh code
parallel type double pump parallel type double pump
S : シングルポンプ 標準 standard :
S シングルポンプ ー : 標準 standard
single pump H : インペラー付 with centrifugal pump single pump H : インペラー付 with centrifugal pump
P : PTO付 with PTO P : PTO付 with PTO
仕様 /SPECIFICATIONS 1MPa=10.197kgf/cm2
1N·m=0.10197kgf-m
仕様 /SPECIFICATIONS 1MPa=10.197kgf/cm2
1N·m=0.10197kgf-m
1. 性能、機能、寿命を保証できる圧 1. 性能、機能、寿命を保証できる圧
サイズ size 63 112 140 280 力で、強度上問題ありませんが、
サイズ size 80 140 160 200 力で、強度上問題ありませんが、
押しのけ容積 displacement (cm3) 63 112 140 280 軸受寿命には限界があります。 押しのけ容積 displacement (cm3) 80 140 160 200 軸受寿命には限界があります。
Pressure to which guarantee of Pressure to which guarantee of
圧 力 1 定 格 rated 34.3 performance, functions or service 圧 力 1 定 格 rated 34.3 performance, functions or service
pressure life is applied. Durability is unlimited pressure life is applied. Durability is unlimited
(MPa) ピーク peak 39.2 (except for the bearing life). (MPa) ピーク peak 39.2 (except for the bearing life).
2 自吸最高 1,600 2. 傾転角最大の場合の標準ポンプの 2 自吸最高 1,900 2. 傾転角最大の場合の標準ポンプの
回転数 2,650 2,360 2,150 回転数 2,460 2,160 2,000
speed max. for self priming (2,000) 4 限界回転数です。エンジン駆動の
speed max. for self priming (2,200) 4 限界回転数です。エンジン駆動の
(min-1) 場合にはハイアイドル回転数が (min-1) 場合にはハイアイドル回転数が
3 最 高 max. 3,250 2,700 2,500 2,000 3 最 高 max. 3,000 2,500 2,350 2,200
この値以下であることが必要で この値以下であることが必要で
最大入力トルク(タンデムポンプ) (N·m) す。吸入フランジ部で- 0.01MPa 最大入力トルク(タンデムポンプ) (N·m) す。吸入フランジ部で- 0.01MPa
max. input torque of tandem pump 343 588 1,120 1,950 以上を確認して下さい。 max. input torque of tandem pump 529 843 1,120 以上を確認して下さい。
(N·m) At max. displacement. In case of 付属ギヤポンプ(PTO部)最大入力トルク (N·m) At max. displacement. In case of
付属ギヤポンプ(PTO部)最大入力トルク 125 294 engine driving, max. idling speed 125 294 engine driving, max. idling speed
max. input torque of attached gear pump with PTO max. input torque of attached gear pump with PTO
should be below this value. should be below this value.
質 量 シングル single 48 68 86 140 This suction pressure should be 質 量 シン グル single 48 68 86 This suction pressure should be
mass -0.01MPa and above. mass -0.01MPa and above.
(kg) タン デム tandem 81 125 160 270 (kg) タン デム tandem 81 125 160
3. 吸入フランジ部で 0.1MPa 以上の 3. 吸入フランジ部で 0.1MPa 以上の
5 耐摩耗性作動油 antiwear hydraulic fluid 種 類 type 5 耐摩耗性作動油 antiwear hydraulic fluid
種 類 type ブースト圧が必要です。 ブースト圧が必要です。
P
△P=PA-PL
全馬力 + カットオフ PA : ポンプ圧
Q ロードセンシング制御 pump pressure ポンプ圧と負荷圧の差圧を常 Load sensing control can be obtained.
total
horsepower control
L load sensing control Q PL : 負荷圧 に一定にさせるロードセンシン
6 + pressure cut-off load pressure グ制御が行なえます。
△P
P
パワーシフト制御 Q Pf 外部から電流値またはパイロ Variable horsepower control can be 入力電流に比例させて流量を With the electric current, the oulet flow
ット圧力Pfを導入することによ obtained by supplying pilot pressure or 電気流量制御 Q
9 variable E electric flow control 増加させる電気流量制御が行 can be controlled.
horsepower りポンプ入力馬力を無段階に electric current. なえます。
control 制御できます。 I
P 電流値 electric current
レギュレータコードNo.
code No. 10 20 60 2P 2N 9L 2C 9N
P2 P2
P2 P2
P2 P2
Pf Pf
P2
回路図
circuit Pi1 Pm1
Pi1 PL Pi1
diagram PA Pi1
7 8
寸法 /DIMENSIONS
●タンデム形 / Tandem Type ●寸法表 /Dimensions (mm)
サイズ size D1 D2 D3 d L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15
回転方向 direction of rotation K3V63 180 125 82.55 18 76 70 70 142 190 89 98 8 228 138 37 37 464 97 195
L1 吸 入 suction
: 右回転 clockwise K3V112 224 160 82.55 22 78 80 80 142 234 100 110 8 265 167 41 41 538 109 220
Dr1 吐 出 delivery
L3
: 左回転 counterclockwise K3V140 250 180 101.6 22 93 92 92 142 256 112 123 8 305 190 53 53 618 121 245
軸端より見て K3V280 300 200 26 115 150 125 142 300 127 140 8 356 203 70 70 792 150 286
viewed from shaft end
K5V80 180 125 82.55 18 76 70 70 142 190 89 98 8 228 138 37 37 464 97 195
K5V140 224 160 82.55 22 78 80 80 142 234 100 110 8 265 167 41 41 538 109 220
K5V160 250 180 101.6 22 93 92 92 142 256 112 123 8 305 190 53 53 618 121 245
K5V200 250 180 101.6 22 93 92 92 142 256 112 123 8 305 190 53 53 618 121 245
L2
Dr2
吸 入 suction
サイズ size L16 L17 L18 L19 L20 L21 L22 L23 M
吐 出 delivery
ドレンポートはDr1,Dr 2の1ヵ所を使用
K3V63 110 213 177 268 150 2.4 8 106 2—M10—25
Use Dr1 or Dr2 port for case drain. K3V112 110 213 214 305 150 2.4 8 106 2—M10—25
L8 L9
L4 K3V140 122 292 257 361 200 2.4 15 127 4—M12—22
L10
K5V80 110 213 177 268 150 2.4 8 106 2—M10—25
K5V140 110 213 214 305 150 2.4 8 106 2—M10—25
4- d K5V160 122 292 257 361 200 2.4 15 127 4—M12—22
K5V200 122 292 257 361 200 2.4 15 127 4—M12—22
L15
L7
L11 L12
Dr1 ダイヤメトラルピッチ
サイズ size no. of teeth pitch circle dia pressure angle module rule
L14
L6
a
Dr1 K5V80 50.8 88.9 60 M12—18
L23
D3
L20
歯底形状 フラットルート
Dr2 root form
工具
flat root サイズ size a b c d e—ネジ深さ depth d d e
cutter ダイヤメトラルピッチ 16 /32
吸 入 suction diametral pitch K3V63 23.8 50.8 19 31.0 M10—16
圧力角/pressure angle 30°
ドレンポートはDr1,Dr 2の1ヵ所を使用 嵌 合 サイドフィ ット
K3V112 23.8 50.8 19 31.0 M10—16
Use Dr1 or Dr2 port for case drain. type of fit side fit K3V140 27.8 57.2 25 37.5 M12—22
L8 L9 規 格/rule SAE
L4 K3V280 31.8 66.7 32 61.5 M12—20 c c
b
L10
K5V80 23.8 50.8 19 31.0 M10—16
K5V140 27.8 57.2 25 37.5 M12—22
K5V160 27.8 57.2 25 37.5 M12—22 a a
4- d K5V200 27.8 57.2 25 37.5 M12—22 L9
L15
L7
L11 L12
Dr2
サイズ size a b c d
D2
c
K3V140 G 3/4 30.8 3.5 23
D1 K3V280 G 3/4 30.8 3.5 23
吐 出 delivery a
L5 L13 L17 K5V80 G 1/2 22.6 2.5 19
d
K5V140 G 3/4 30.8 3.5 20 45°
フランジ取付面 フランジ取付面
flange mounting face flange mounting face K5V160 G 3/4 30.8 3.5 23
K5V200 G 3/4 30.8 3.5 23
9 10
寸法 /DIMENSIONS
●パラレル形 /Parallel Type ●シングル形 /Single Type
L11 L4
L9 L7 PTO部寸法 K5V200Sの場合
吸 入 suction
L10
Dimensions of PTO unit for K5V200S 4- d L1
Dr1 吐 出 delivery
Dr1
+0.127
13 回転方向 direction of rotation
φ22.276 0
: 右回転 clockwise
L3
2.4 : 左回転 counterclockwise
L7
L5
軸端より見て
φ101.6+0.03
viewed from shaft end
+0.05
L16
L2
φ110
D2
L6
Dr2 吸 入 suction
L4
ANSI 吐 出 delivery
L16
インボリュートスプライン L5
19 Involute spline L8 L9
ドレンポートはDr1の1ヵ所を使用 47 to ANSI L4 L10
Use Dr1 port for case drain.
L8 L6
L13 15°
回転方向 : 右回転 °
direction of rotation: clockwise 30 4- d
L15
吐 出 delivery 軸端より見て 12 d
viewed from shaft end
L7
L1
272
30°
(127.3)
L3
L11 L12
Dr2
D2
Dr1
45°
L6
L14
D1
L2
L13
L5 フランジ取付面 ドレンポートはDr1,Dr 2の1ヵ所を使用
D1
flange mounting face Use Dr1 or Dr2 port for case drain.
吸 入 suction 8-M12 ネジ深サ22 90
thread depth 22
( 21
4= PTO 付
12
/Dimensions
°
● 寸法表
360 with PTO
146
7
(mm)
°
0)
L12 164 143 160 サイズ size D1 D2 d L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16
K3V63 180 125 18 76 70 70 142 190 89 98 8 210 138 37 37 277 89 195
K3V112 224 160 22 78 80 80 142 234 100 110 8 250 167 41 41 309 109 220
● 寸法表 /Dimensions K3V140 250 180 22 93 92 92 142 256 112 123 8 292 190 53 53 366 121 245
サイズ size D1 D2 d L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 K3V280 300 200 22 115 150 125 142 300 127 140 8 343 203 70 70 433 135 286
K3V112 429 410 11 235 113 163 111 256 428 493 34 5 148 522 391 385 K5V80 180 125 18 76 70 70 142 190 89 98 8 210 138 37 37 277 89 195
K5V160 530 511 14 272 135 206 141 301 456 519 36 5 135 575 422 398 K5V140 224 160 22 78 92 92 142 234 100 110 8 257 167 41 41 326 110 220
K5V200 530 511 14 272 135 206 141 301 492 570 52 5 135 625 400 398 K5V160 250 180 22 93 92 92 142 256 112 123 8 292 190 53 53 366 121 245
K5V200 165 21 75 92 92 142 262 131 131 16 300 190 53 53 389 121 245 225
● 軸端スプライン要目 /Dimensions of shaft end
要 目 spec. 歯 数 圧力角 モジュールまたは 規 格
● 軸端スプライン要目 /Dimensions of shaft end
ピッチ円直径 (mm)
サイズ size ダイヤメトラルピッチ 要 目 spec. 歯 数 ピッチ円直径 (mm) 圧力角 モジュールまたは
規 格
no. of teeth pitch circle dia pressure angle module rule ダイヤメトラルピッチ
サイズ size no. of teeth pitch circle dia pressure angle module rule
K3V112 14 35.0 20° 2.5 JIS B 1603
K3V63 14 29.6 30° 12/24 SAE
K5V160 15 47.6 30° 8/16 ANSI K3V112 14 35.0 20° 2.5 JIS B 1603
K5V200 15 47.6 30° 8/16 ANSI K3V140 17 42.5 20° 2.5 JIS B 1603
K3V280 18 54.0 20° 3.0 JIS B 1603
● 吸入フランジ取付面(SAE規格) d K5V80 12 30.0 20° 2.5 JIS B 1603
Flange mounting face for Suction port (SAE Rule) (mm) K5V140 17 42.5 20° 2.5 JIS B 1603
サイズ size a b c d—ネジ深さ depth K5V160 17 42.5 20° 2.5 JIS B 1603
c
K5V200 13 41.3 30° 8/16 SAE
a
a
K5V80 27.8 57.2 25 M12—16 K5V80 35.7 69.9 38 M12—18
K3V112 23.8 50.8 19 34.0 M10—16 c c
K5V140 27.8 57.2 25 M12—16 K5V140 61.9 106.4 76 M16—24
b
c
c
d
K5V160 G 3/4 30.8 3.5 23
d
取付方向と外部ドレンの配管 駆動軸との結合
Mounting Direction and Drain Piping Connection of Driving Shaft
軸を水平にして取付けてください。 The pump shaft should be mounted in the horizontal 駆動軸と原動機との結合には、フレキシブルカップリングを Please use a flexible coupling for connection of the
外部ドレン用配管を設置し、配管はポンプより一度上に上 direction as shown in the figure below. 使用してください。 pump drive shaft with an engine flywheel or an electric
げてからタンクに戻してください。 The drain line loop must be extended above the top of motor shaft.
the pump case. センタリングは、軸心のずれが0.03 mm以内になるように
Alignment should be so carried out that the parallel
外部ドレンは上部のドレンポートから取ってください。 The upper drain port should be used, and the drain 取付けてください。 error may be held with in ± 0.03 mm.
ドレン配管は、ドレンポートサイズ以上の口径のものを使用 pipe size must be equal to or larger than the drain port 軸端にはラジアル荷重やスラスト荷重がかからないようにし Do not put a radial or thrust load at the shaft end.
してください。 size. てください。
In case of the pumps with centrifugal pump, the drain
インペラー付タンデムポンプの場合は、2つのポンプのそれ
lines must be settled on each pump.
ぞれから外部ドレンを取ってください。
運転時の注意事項
Starting
始動の際には必ず、ポンプケーシング内にドレンポートから Before starting-up, fill the pump case with system fluid
作動油を満たしてください。作動油がない場合、潤滑不足 through the case drain connection. Case must remain
のために内部部品が焼き付くおそれがあります。 full of fluid to provide internal lubrication.
フロントポンプ リヤポンプ
ケーシング内圧
front pump rear pump
タンデムポンプ
tandem pump Case Drain pressure
ケーシング内圧は、常用で 0.1 MPa 以下、ピーク時でも Please be careful so that the drain pressure in the
0.4 MPa 以下になるようにドレン配管サイズとフィルタサ casing does not exceed 0.1 MPa normally and 0.4
フィルタ イズを選定してください。 MPa at its peak.
A suitable size of drain hose and drain filter should be
selected.
Filtration
ポンプの寿命はコンタミネー For satisfactory service life
フィルタ設置例 0.4 MPa (peak)
ションに大きく影響されます。 Examples of using a filter of these pumps in
application, the operating P
タンク内の作動油はNAS9級
fluid should be continuously
(ISO4406-/18/15)以内の清 fiitered to keep at least the
0.1 sec
浄度を保つようにしてください。 cleanliness level of NAS 1638 0.1MPa (normal)
アクチュエータの戻り回路に Class 9. ( ISO 4406-/18/15 )
10μmフィルタを設置してくだ A 10 μm filter must be used
さい。また、吸入側には80∼ in the return line and a 80 ~
10 μm 10 μm 150 mesh strainer in the
150メッシュのストレーナを設 空気
suction lines.
air
置してください。
150メッシュ
150メッシュ 150 mesh
150 mesh
13 14