This document provides specifications for MPP Solar's PIP series pure sine wave inverters ranging from 2500W to 4000W. The inverters can output 230V AC power from a 24V or 48V DC battery source. They feature pure sine wave output, high efficiency over 90%, and protections for overloads, temperatures, and battery polarity. The inverters are suitable for RV, marine, and off-grid applications.
This document provides specifications for MPP Solar's PIP series pure sine wave inverters ranging from 2500W to 4000W. The inverters can output 230V AC power from a 24V or 48V DC battery source. They feature pure sine wave output, high efficiency over 90%, and protections for overloads, temperatures, and battery polarity. The inverters are suitable for RV, marine, and off-grid applications.
This document provides specifications for MPP Solar's PIP series pure sine wave inverters ranging from 2500W to 4000W. The inverters can output 230V AC power from a 24V or 48V DC battery source. They feature pure sine wave output, high efficiency over 90%, and protections for overloads, temperatures, and battery polarity. The inverters are suitable for RV, marine, and off-grid applications.
ELECTRICAL SPECIFICATIONS KEY FEATURES Max Continuous Power 2500W 3000W 3500W 4000W ● Pure sine wave output ensures seamless Output Voltage 230V ±5% Output Regulation compatibility with all types of loads. Output Waveform Pure Sine Wave ● Peak efficiency up to >90% Output Frequency 50Hz/60Hz ± 1Hz ● Output available range from 2500W Peak Efficiency >90% to 4000W and 24V to 48V System Voltage 24V / 48V 48V Only ● Supports both 50hz and 60hz DC Input Range 10V~15V / 20V~30V 21V~29V ● 230V nominal output with regulation (220- 240V load compatible) No Load Consumption <15W <20W <20W Standby Consumption N/A <4W <10W ● Large LCD display for system information and basic programming Batt. Reverse Polarity By Fuse (available on 1624/2424 only) Overload Protection >650W Shutdown >1.2KW Shutdown >150% Load for 5sec ● Auto-restart feature upon fault (available Low Battery <10V±0.5V / <20V±0.5V 20-22V (load specific) on 1624/2424 only) LCD / LED LED Only LCD & LED ● Standby power mode Comm. Inteface N/A COM port (reserved) ● Low idle power consumption ENVIRONMENTAL / MECHANICAL SPECIFICATIONS ● Lightweight anodized casing Certification CE certified ● Automatic detection of battery voltage. Operating Temperature 0°C ~ 50°C ● Suitable for wall mounting. Operating Humidity 10~90%RH Non-Condensing ● Inherent safety protections include over- Dimension 62*117*295mm 80*195*360mm 82*232*369mm load, over temperature and short circuit, Weight 2.5Kg 4.5Kg 5.8Kg and battery reverse polarity.
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.