Professional Documents
Culture Documents
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CHECK 1 - Detailing requirements
End plate depth, di [mm] 210.00 150.00 -- DG6 Part D Sec. D1
Bearing pad depth, dj [mm] 200.00 150.00 -- DG6 Part D Sec. D1
Bearing pad width, bj [mm] 150.00 150.00 -- DG6 Part D Sec. D1
Bearing pad thickness, tj [mm] 20.00 20.00 24.00 DG6 Part D Sec. D1
End plate thickness, ti [mm] 20.00 12.00 -- DG6 Part D Sec. D1
CHECK 8 - Beam rotation check
Beam rotation 0.01 -- 0.02 DG3 Sec. 10.8
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CHECK 2 - Design shear capacity of beam web at end plate
Uncoped beam shear capacity [KN] 270.67 180.00 0.67 DG3 Sec. 10.5
CHECK 3 - Design bearing capacity at interface of plates
Interface bearing capacity [KN] 756.00 180.00 0.24 Cl. 5.13.3
CHECK 4 - Design capacity of end plate (compression)
End plate compression capacity [KN] 756.00 180.00 0.24 Cl. 6.2.1
CHECK 5 - Design capacity of bearing pad (compression/shear)
Bearing pad compression and shear capacity [KN] 756.00 180.00 0.24 DG6 Part D Sec. D6
CHECK 6 - Design capacity of weld to end plate
End plate weld capacity [KN] 919.43 180.00 0.20 Handbook 1 Sec. 4.5,
Cl 9.7.3.10
CHECK 7 - Design capacity of weld to bearing pad
Bearing pad weld capacity [KN] 391.00 180.00 0.46 Handbook 1 Sec. 4.5,
Cl 9.7.3.10
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Global critical strength ratio 0.67
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
NOTES
- Unsuitable bolt grade for recommended detailing, should be 8.8/S.
- Unsuitable bolt diameter for recommended detailing, should be 20 [mm] or 24 [mm].
- Unsuitable steel plate grade for recommended detailing, plates are either cut from plate (Grade 250) or are cut from standard square edge flat bar
components (Grade 300).