You are on page 1of 63

Product Guide TALIA

Release 01_16.05.07
INDICE
1 VALUE PROPOSITIONS ........................................................................................................................... 4
2 EASY TO SELL.......................................................................................................................................... 5
2.1 MULTILEVEL INTERFACE ................................................................................................................. 6
2.1.1 Interface description ................................................................................................................ 6
2.2 DISPLAY DESCRIPTION .................................................................................................................... 7
2.2.1 Week time programming zone................................................................................................. 7
2.2.2 Functioning and diagnostic zone ............................................................................................. 8
2.2.3 Peripherals control................................................................................................................. 10
2.3 INFORMATION SYSTEM.................................................................................................................. 11
2.4 SELF-CHECK FUNCTION ................................................................................................................ 12
2.4.1 Malfunctions that can be reset by end user........................................................................... 12
2.4.2 Malfunctions that cannot be reset by end user...................................................................... 12
2.5 “ANTIFREEZE” FUNCTION .............................................................................................................. 13
2.6 DHW COMFORT ............................................................................................................................... 14
2.6.1 DHW performances & certification ........................................................................................ 14
2.6.2 The MSC system ................................................................................................................... 14
2.6.3 DHW timer program............................................................................................................... 15
2.7 SOLAR PREDISPOSITION ............................................................................................................... 16
2.8 HEATING COMFORT........................................................................................................................ 17
2.8.1 Heating performances & certification .................................................................................... 17
2.8.2 System approach................................................................................................................... 17
2.8.3 Thermoregulation .................................................................................................................. 17
2.8.4 Built-in weekly timer............................................................................................................... 19
2.9 MSI FUNCTION: ACOUSTIC COMFORT......................................................................................... 20
3 EASY TO INSTALL.................................................................................................................................. 21
3.1 OVERALL DIMENSION..................................................................................................................... 22
3.2 HYDRAULICS CONNECTIONS........................................................................................................ 24
3.2.1 The solar kit ........................................................................................................................... 25
3.2.2 Hydraulic connections cover.................................................................................................. 25
3.3 FLUE CONNECTIONS ...................................................................................................................... 26
3.3.1 Open chamber system .......................................................................................................... 26
3.3.2 Coaxial system 60/100 .......................................................................................................... 26
3.3.3 Coaxial system 80/125 .......................................................................................................... 28
3.3.4 Twin Pipes system................................................................................................................. 29
3.4 OLD C&M BOILER RANGE REPLACEMENT .................................................................................. 31
3.4.1 Replacement Celtic boiler by TALIA...................................................................................... 31
3.4.2 Replacement Centora boiler by TALIA................................................................................. 32
3.5 COMPETITORS REPLACEMENT .................................................................................................... 33
3.5.1 Replacement SOUNIER DOUVAL boiler by TALIA .............................................................. 33
3.5.2 Replacement ELM GVM boiler by TALIA .............................................................................. 33
3.6 ELECTRICAL CONNECTIONS......................................................................................................... 34
3.6.1 Installer zone ......................................................................................................................... 34
3.6.2 Thermoregulation device connections................................................................................... 35
3.7 INSTALLATION SETTING & FUNCTIONS ....................................................................................... 36
3.7.1 The personalisation Menu ..................................................................................................... 36
3.7.2 Automatic air purge function.................................................................................................. 36
3.7.3 Flue cleaner function ............................................................................................................. 37
3.8 SYSTEM PREDISPOSITION ............................................................................................................ 37
3.8.1 Clip IN in 2 relés .................................................................................................................... 38
3.8.2 Clip IN in solar ....................................................................................................................... 39
4 EASY TO MAINTAIN ............................................................................................................................... 42
4.1 DIAGNOSTIC .................................................................................................................................... 43
4.1.1 Error codes ............................................................................................................................ 43
4.1.2 Complete information on boiler status................................................................................... 43
4.2 MSA: MODULAR SYSTEM APPROACH & BOILER OVERVIEW.................................................... 44

Page. 2 of 63
4.2.1 Open chamber overview........................................................................................................ 45
4.2.2 Sealed chamber overview ..................................................................................................... 46
4.2.3 Hydraulic diagram.................................................................................................................. 47
4.2.4 Hydraulic circuit ..................................................................................................................... 48
4.2.5 Hydraulic assembly ............................................................................................................... 49
4.2.6 By pass .................................................................................................................................. 49
4.2.7 New proportional flow meter.................................................................................................. 50
4.2.8 Hydraulic group maintenance................................................................................................ 51
4.2.9 Combustion group CF ........................................................................................................... 52
4.2.10 Combustion group FF............................................................................................................ 53
4.2.11 Combustion group maintenance............................................................................................ 54
5 BOILER CODES ...................................................................................................................................... 55
6 ACCESSORY CODES ............................................................................................................................. 56
6.1 INSTALLATION ACCESSORIES ...................................................................................................... 56
6.2 TERMOREGOLATION INTERFACES .............................................................................................. 57
6.3 TERMOREGOLATION ACCESSORIES ........................................................................................... 58
6.4 HYDRAULIC ACCESSORIES ........................................................................................................... 60
7 TECHNICAL DATA.................................................................................................................................. 62
7.1 OPEN-CHAMBER ............................................................................................................................. 62
7.2 SEALED-CHAMBER ......................................................................................................................... 63

Page. 3 of 63
1 VALUE PROPOSITIONS
The new TALIA by Chaffoteaux is the result of a careful analysis of the installers and
service technicians needs in order to make their job easier.

EASY TO SELL
The result is the TALIA boiler, the solution that every customer will choose in terms
of easiness of use and its ability to totally satisfy every comfort needs.
All this in the more efficient way thanks to “new intelligence” able to make easy
most advanced thermoregulation systems used to achieve the maximum energy
saving and the minimum of the environment impact.
The TALIA boiler is also predisposed to optimize the use of a storage tank & solar
panel

EASY TO INSTALL
Always innovative to assuring the maximum installation easiness, TALIA boiler by
Chaffoteaux not only offers a wide range of simple pre-installation accessories,
replacement accessories or substitution but once again make breakthrough the
installer support.
TALIA boiler is in fact designed not to be only perfectly integrated in the Central
Heating and Domestic Hot Water but to become the heart of the “system” thanks to
its predisposition to manage a wide range of thermoregulation and hydraulics
accessories to ensure a personalized comfort in every room of the house.
Moreover, TALIA boiler is ready to work with the new renewable energies making
extremely easy the installation integrated with solar panels for the DHW production,
also for the installer less experienced in this new activity.

EASY TO MAINTAIN
The boiler’s real value is in the security of the service for witch the appliance has
been purchased.
For this reason TALIA has been designed to avoid whichever problem for the end
user.
If case of not good operation, TALIA, thanks to its second generation of self-
diagnosis function, is able to identify and monitor in real time the boiler status,
check the causes and communicate it by clear text on multifunction digital display
And if the problem will require an intervention of the Authorized Assistance Centre,
the boiler will remind the name and telephone number to restore immediately the
correct functioning.
Indeed, each operation will result easy and quick thanks to the display that visualize
all parameters to manage the boiler and, in case of component replacement due to
a fault, this won’t be a problem thanks to frontal access to all components.

Page. 4 of 63
2 EASY TO SELL
The TALIA boiler and its features make the offer attractive for the installer for any requirement

Design & easy interaction


A new design, the materials quality and the attention to aesthetic details allow installing TALIA in every
place, also the most sophisticated.

The control interface has been carefully designed in order to guarantee an easy of use thanks to the digital
display and to the different definition levels to manage different functions.

From the simple CH and DHW temperature management through two big encoders, to the most sophisticate
functions use (left side door) to go the most complete customized functions through the programming keys
(right side door)

Moreover, the digital display through the INFO button, allow to have all informations in order to assuring a
correct operation of the boiler, the number of months remaining until the next scheduled service in addition to
the contact details of the Assistance Centre which will be responsible of carry on the service.

Page. 5 of 63
2.1 MULTILEVEL INTERFACE

Different level of accessibility: Different level of accessibility:

A first level with two simple encoders A second level for main user functions
to set the standard temperature of
A third level to access to the complete set
Central Heating and Domestic Hot
of parameters by Menu
Water

2.1.1 Interface description

LEGEND
1. Multifunctional LCD display 8. Domestic hot water temperature control knob
2. Main switch 9. Manometer
3. Central Heating temperature control knob 10. INFO button
4. “Mode” button 11. “Esc” button
5. DHW timer button 12. “Menu/Ok” button
6. CH timer button 13. “Reset” button
7. “Auto” function button

Page. 6 of 63
2.2 DISPLAY DESCRIPTION
The new LCD display enables the end user to check the operating status of the boiler at any time. Principal
informations are displayed on the display for a better comprehension of operation and adjustments of the boiler.
Following, the principal informations displayed on the display for a better comprehension of operation and
adjustments of the boiler.

2.2.1 Week time programming zone

LEGEND
Hours programming

Week/day programming
Programming indication
(zone 1 or zone 2) for heating
Programming indication for DHW

Date and time

Hours programming activated

• Operation with weekly/schedule


Central Heating programming
The display shows (if set) the weekly/schedule
programming for up to two heating zones.

• Operation with weekly/schedule


programming
The display shows if the programming for
D.H.W. comfort is activated.

Page. 7 of 63
2.2.2 Functioning and diagnostic zone

LEGEND
Indication : menu setting, temperature,
default code

Reset requested

Technical assistance requested

Flame indication and power used

Heating functioning and temperature


level setting

Domestic hot water functioning and


temperature level setting

Clear text for all information

Comfort function activated

• Temperature monitoring
By pressing the INFO button, the end user can
check the indoor temperature (if a “room sensor”
is connected) or the outdoor temperature (if an
outdoor sensor is connected).

• Error code indication


If the boiler experiences an operating error, the
display will show the relevant error code,
thereby enabling the Technical Assistance
Service to identify the problem immediately.

• Assistance Service
If the boiler is lock-out, the display shows the
text RESET and the relevant error code. To
restore boiler operation, simply press the
RESET button on the control panel.
If the user is not able to resolve the problem,
the icon will appear on the display,
advising that the Technical Assistance Service
is needed.

Page. 8 of 63
• Burner flame symbol and relative power
level
Whenever the burner is producing a flame, the flame
symbol appears on the display. The power level at
which the boiler is operating is visualised underneath
this symbol.

• “Heating” operating mode


Operation in “Heating” mode is displayed by the
radiator symbol and the operating temperature level
of the boiler.

• “Hot water” operating mode


Operation in “Hot water” mode is displayed by the tap
symbol and the operating temperature level of the
boiler.

• Informative text
At the bottom of the display, a text string guides the
user and the Technical Assistance Service through
every operation, making the boiler extremely easy to
manage.

• “Comfort” function
When the COMFORT function is active (instantaneous
production of domestic hot water) the display shows
the following indication.

Page. 9 of 63
2.2.3 Peripherals control

LEGEND
Thermoregulation activated

Installation with solar panels

Info menu

• Temperature control functions


When the SRA function is activated the boiler
automatically recognizes whether a Room Sensor, an
Outdoor Sensor or a Clima Manager is connected to
the system, adjusting its operation for getting the best
efficiency and comfort.

Page. 10 of 63
2.3 INFORMATION SYSTEM
The simple and practical key information is very useful for the customer and the service after sale

ƒ Simply by pressing the “INFO” button, the ƒ To move from one piece of information to the
end user may immediately view a whole next, press again the “INFO” button. The text
range of informations which are necessary string at the bottom of the display indicates
to the correct operation of the boiler. which information is being shown.

“INFO TOP” SYSTEM DISPLAY EXAMPLES


• Time of day • Hot water flow rate (litres/min) • Telephone number and
name of Assistance Centre

• Set heating temperature • COMFORT function activated • Outdoor temperature °C (if an


with hot water at 50°C outdoor sensor is connected)

• Set hot water temperature • SRA function enabled • Internal temperature °C

• Set number of days until the • Hot water temperature


next scheduled maintenance inside the solar indirect
operation cylinder

Page. 11 of 63
2.4 SELF-CHECK FUNCTION
TALIA boiler monitors its own functions and operation status by means of a latest-generation self-check
system.
The display clearly indicates any anomalies and suggests what to do in the simplest way. It also helps the
Technical Service to find the cause of the fault showing an error code, together with an explanation of the
type of malfunction.
We have two types of information:
• Malfunctions that CAN BE RESET BY END USER without an intervention of Technical Service;
• Malfunctions that CANNOT BE RESET BY END USER and needs an intervention of Technical Service.
2.4.1 Malfunctions that can be reset by
end user
Let’s see how the boiler reacts in the case
of an error that can be reset (for example,
when the safety thermostat switches the
system off).
This thermostat intervenes when the
temperature of the heating water reaches
105 °C, to make sure that no damage is
caused to any part of the boiler.
The error code: (in this case, the number
101) and the “ ” flash alternately.
The display also gives a description of the
problem (in example using the word
“Overheat”).
When the reset key is pressed, the boiler
returns to normal operation.

2.4.2 Malfunctions that cannot be reset


by end user
When there is a NO RESET error , such as
a malfunction of the heating-water delivery
probe, the display shows the error code: in
this case, the number 110 flashes
alternately with a “ ” symbol.
The display gives a description of the
problem, (in example Heating Probe Is
Defective).
In this case, the error cannot be reset and
an intervention of Technical Assistance is
required (press INFO button to show the
name and telephone number).
When the fault has been repaired, the
boiler will return to normal operation.

Page. 12 of 63
2.5 “ANTIFREEZE” FUNCTION

TALIA boiler is fitted with an Anti-


Freeze Protection system for the
central heating and the hot water
systems.
THIS FUNCTION DISABLE ANY
HEATING REQUEST.
In order to activate it, to repeat
press key MODE until that the
display will show:

If the temperature detected by the


“main heat exchanger probe” (1)
ranges between 3°C and 8°C, the
pump (4) runs and the 3 way valve
(3) switches alternatively its
position from domestic hot water to
central heating.
If, after 20 minutes, this
temperature remains between 3°C
and 8°C, also the BURNER (2)
turns on, supplied with minimum
power until raises

Page. 13 of 63
2.6 DHW COMFORT
2.6.1 DHW performances & certification
The hot water production represents the most important value for any boiler and the TALIA has achieved
successfully the best level according to EN13203 – part 1 (performance of DHW delivery) in terms of:
• SPECIFIC RATE
• TEMPERATURE STABILITY
• NO WAITING TIME
• MINIMUM NOMINAL WATER FLOW RATE
TALIA satisfies not only the EN13203-part1.
It take into consideration also the need of the end user in terms of saving according to EN13203-part 2, with
the following checks:
• ENERGY CONSUMPTION IN STAND BY MODE
• ENERGY RECOVERED BY THE USEFUL WATER
• GAS ENERGY
• ELECTRICAL ENERGY
• AUXILIARY ENERGY COSUMPTION WITH THE OFF MODE.

2.6.2 The MSC system

The new system MSC (Multi Modulation Sanitary


Control), bring the best answer in term of DHW
waiting time, temperature stability even with fast,
successive tapping or with small water flow
demand. This is the most severe test for a boiler.

The new system MSC guaranties moreover the optimization of the


boiler management thanks to his progressive intelligence and the new
flow sensor with turbine is able to adapt instantaneously the boiler
output according to efficiency needed minimizing the consumption

The turbo sensor advantages:


ƒ perfect gas power adaptation to the DHW flow rate
ƒ DHW regulation more sensitive
ƒ very quick answer time
ƒ low overheating or downheating during transient water flow rate
ƒ Not sensitive to hammer shock
ƒ Repeatability
ƒ Save time and energy
ƒ 30 signals/second transmits by the turbine sensor to the microprocessor
ƒ Provides immediately hot water even at reduce flow rates

Page. 14 of 63
2.6.3 DHW timer program
A saving even more important and subsequently achievable through the weekly DHW programming, built in
on the boiler which allows the comfort customizing according to the real need of the customer.

A new function that allows setting the DHW weekly timer integrated

This function permit to maintain the temperature of the plate heat exchanger for shorter DHW waiting
time.
It’s possible to program period of reheating for each day.

Page. 15 of 63
2.7 SOLAR PREDISPOSITION

Natural circulation solar


or centralized
solar installation

Serie solution
with combi boiler
& forced circulation

Parallel solution
with heating only boiler
& forced circulation

Page. 16 of 63
2.8 HEATING COMFORT
2.8.1 Heating performances & certification
In line with the most severe European standard in term of energetic efficiency, Talia is certified *** according
to the European standard 92/42/EEC, one certificate which offer also a guaranty of saving.

This result thanks to the quality of the components and the intelligence of the boiler capable to optimize the
performances of the combustion & hydraulic group equipped by
• New burner
• New primary exchanger Efficiency
• Modulating fan & Saving
• Modulating pump

2.8.2 System approach


The boiler value is measured by the capability to give the right answer to the specific request independent of
the change of the external (climatic) or internal condition.

Climatic conditions

Ambient conditions
thermoregulation
Zone 1

Zone 2
Hydraulic
distribution
Zone 3
Boiler
performances

2.8.3 Thermoregulation

The SRA function (new Automatic Regulation System), permits the access to the thermoregulation world
without any worry in terms of explanations, management or installation

The SRA function is the essence of the project logic:


o Ease of use (only one push on the integrated button)
o Customized comfort in heating guaranteed.

The new intelligence of the boiler will manage in auto-adaptative way the
main values of the boiler, to reach the best result in terms of requested
comfort in every installations & conditions.

► Central heating temperature:


It will adjust automatically and permanently according to the outside temperature and/or of the temperature
in the house.
► Boiler power modulation:
It will adapt the power to the burner according to the operating conditions.

Page. 17 of 63
Depending on the different installation configuration Comfort Saving
level level

++ +
Basic
with room thermostat (on/off)

Climatic +++
with external probe & room ++
thermostat on/off

Ambient
with modulating room ++++ ++++
sensor

Complete
++++ +++++
thermoregulation

The new SRA function assures to reach the following results:

Maximum personalisation
Best efficiency
Maximum comfort
Acoustic comfort
Better reliability
Less environment impact

Heating distribution
A large range of accessories for a large range of heating configurations.
The installer can give easily to the client the best solution for each need

Mono Multi
temperature temperature

Monozone
For big
installation

Double zone

Triple zone

Page. 18 of 63
2.8.4 Built-in weekly timer.
The new electronic controls enable the user to programme the boiler at intervals of 15 minutes for every
single day of the week.
For this type of operation, it is not necessary to purchase an external timer. Programming is
activated/desactivated by pressing the button.
The end user can use 3 pre-set programmes which may obviously be easily customised by the user.

PROGRAMMING: THE DISPLAY


.

Weekly programming 24-hour programming Controlling 2 zones

An heating system which has been divided into


two zones is shown.
TALIA boiler is able to control timer programming
(intervals of 15 minutes) and weekly programming
an independent and specific way for each
programme.
EXAMPLE:
Zone 1: from Monday to Friday, between 6.00
and 9.00 and 18.00 and 22.00.
Zone 2: Thursday and Sunday, between 10.15
and 19.45.

Page. 19 of 63
2.9 MSI FUNCTION: ACOUSTIC COMFORT

The boiler has been designed to reach the maximum performance in terms of acoustic comfort

ƒ Double CH weekly programmer


ƒ Sanitary weekly programmer
ƒ Multispeed auto adaptative pump
ƒ Modulating fan
ƒ New burner
ƒ New primary exchanger
ƒ New hydraulic group noiseless
ƒ Smart modulation
ƒ Automatic air purge cycle

The new Chaffoteaux intelligence is able to manage


the new modulating fan and the multi speed pump
in the autoadaptative way according the real
requested performance minimizing the gas and
electrical consumption.

But not only !


Because in such a way TALIA guarantee a non comparable silence thanks to the MSI function (MultiSoft
Ignition), which allows the installation in any place in the house.

The ignition is done with a maximum of 3 attempts at different power level to ensure an optimized ignition &
to reduce noise.

1° attempt : the power used is 80 % of slow ignition power


2° attempt : the power rises to 90%
3° attempt : power reaches 100%of slow ignition power

Page. 20 of 63
3 EASY TO INSTALL
Each elements of this boiler as been designed to give to the installer the maximum easiness and fastness in
the installation activity: hydraulic, exhaust gas flue & electrical connection.

The TALIA, even if lighter compared with the old Chaffoteaux range, keeps exactly the same hydraulic
connections for an immediate replacement of the old previous models respecting the existing installation.

Chaffoteaux represents a reference for the market and continues to represent the best solution for the new
installation and replacement of all boilers with the biggest distance between the hydraulic connections and
the wall, 230 mm.

For the flue gas exhaust, every configuration is possible and in case of twin pipe system configuration the
installer has the possibility to connect the air inlet piping on the left- or right-hand side; furthermore the
reduction in the fixing width between the flue gas exhaust and the hydraulic connections (only 830 mm)
mean that the boiler can be installed easily and quickly, even if in case of replacement with rear pipes
installation.

Also for the electrical connections, has been created an installer zone, in the Frontal Panel rear side, for an
easy access to the PCB box where all the connections with the external devices can be easily done.

A wide range of temperature control accessories can be installed, wired (with wires) and wireless (without
wires), in particular the last one permits a complete installation quickly and in a non-invasive way.

Also in terms of function TALIA has been designed to help the installers in their activity, the Automatic Air
purge” for example facilitates the elimination of any air bubbles present in the heating circuit, optimizing the
activity, reducing the time for the completion of the installation and the noise for the end user.

Another important value of this boiler is its capability to work perfectly integrated with the most complex
domestic system for heating and DHW production.

In the first case, a complete of Multizones Modules:


- up to tree zones monotemperatures
- multizones temperatures up to tree zones (HT+2 LT zones)
Allows a total personalization in the installation

For the DHW production, the boiler is set up for use in a system which uses solar panels in series and in
parallel.
Where forced circulation is used, it can control the system directly with the boiler interface with a small clip in
out to put in the electrical box, already predisposed, and without a specific external device not linked to the
boiler.

Page. 21 of 63
3.1 OVERALL DIMENSION

As accessory

* As accessory

A Central heating flow


B Domestic hot water flow
C Gas inlet
D Domestic cold water inlet
E Central heating return

Page. 22 of 63
Page. 23 of 63
3.2 HYDRAULICS CONNECTIONS
All the configurations were imagined before creating a complete range of accessories for the new installation
and the replacement.

FR MARKET

REPLACEMENT KIT

Celtic
FIRST INSTALLATION

ELM

TELESCOPIC FLAPS THE PREFITTING KIT DETAILS


allows to install easily different type of
boiler with or without rear pipes
chassis.

Page. 24 of 63
3.2.1 The solar kit

A new mixing valve designed to be integrated in the prefitting kit.


This device allows to reduced the hot temperature coming from a
solar source to ensure the maximum comfort for the client and
the complete protection for the boiler.

Mixed water
(Toward the
boiler)
Cold water
(no FR/BE
market)

Hot water
(solar or other
source)

Cold water
(FR/BE market) Kit solar mixing valve motor
with solar clip in

3.2.2 Hydraulic connections cover

To finalize the installation with a best aesthetic, it is possible to install the hydraulic connections cover.

As accessory

Page. 25 of 63
3.3 FLUE CONNECTIONS
3.3.1 Open chamber system

The open-chamber version enables 125 mm and


130 mm flue gas exhaust piping to be used without
adaptors.

3.3.2 Coaxial system 60/100

1. Condensate collection pipe


2. Pressure inspection point positive signal
3. Pressure inspection point caps
4. Pressure inspection point negative signal

Page. 26 of 63
LENGHTS WITH LENGHTS WITH MAXIMUM
TYPE OF
60/100 EXHAUST
MODELS DIAPHRAGM (m) NO DIAPHRAGM
(m))
LENGTH
(m)

Ø 43
25 From 1 to 4 4
from 0,5 to 1

Ø 43
C12 30
from 0,5 to1
From 1 to 4 4

Ø 46
35 From 0,75 to 3 3
From 0,75 to 0,75

Ø 43
25 From 1 to 4 4
from 0,5 to 1

Ø 43
C32 30
from 0,5 to1
From 1 to 4 4

Ø 46
35 From 0,75 to 3 3
From 0,75 to 0,75

Ø 43
25 From1 to 4 4
from 0,5 to 1

Ø 43
C42 30
from 0,5 to1
From 1 to 4 4

35 ---- ---- ----

Ø 43
25 From 1 to 4 4
from 0,5 to1

Ø 43
B32 30
from 0,5 to1
From 1 to 4 4

35 ---- ---- ----

Page. 27 of 63
3.3.3 Coaxial system 80/125

LENGHTS WITH MAXIMUM


TYPE OF LENGHTS WITH
80/125 EXHAUST
MODELS
DIAPHRAGM (m)
NO DIAPHRAGM
(m))
LENGTH
(m)

25 Ø 43 from 0,5 to 2 from >2 to 11 11

C12 30 Ø 43 from 0,5 to 3 from >3 to 11 11

35 Ø 46 from 0,75 to 2 from >2 to 8 8

25 Ø 43 from 0,5 to 2 from >2 to 11 11

C32 30 Ø 43 from 0,5 to 3 from >3 to 11 11

35 Ø 46 from 0,75 to 2 from >2 to 8 8

25 Ø 43 from 0,5 to 2 from >2 to 11 11

C42 30 Ø 43 from 0,5 to 3 from >3 to 11 11

35 Ø 46 from 0,75 to 2 from >2 to 8 8

25 Ø 43 from 0,5 to 2 from >2 to 11 11

B32 30 Ø 43 from 0,5 to 3 from >3 to 11 11

35 ---- ---- ----

Page. 28 of 63
3.3.4 Twin Pipes system

For a better flexibility of installation, It allows to connect the air intake pipe to right and on the left

Page. 29 of 63
TYPE OF LENGHTS WITH LENGHTS WITH NO MAXIMUM
80 + 80 EXHAUST MODELS DIAPHRAGM (m) DIAPHRAGM (m)) LENGTH
(m)
Ø 80/80
Ø 43
24 kW from 0,5 to 5 from 5 to 19 (S1=S2) 19+19 (S1=S2)
(S1=S2)
Ø 43
C12 30 kW from 0,5 to 7 from 7 to 24 (S1=S2) 24+24 (S1=S2)
(S1=S2)

35 kW ---- ---- ----

Ø 43
24 kW from 0,5 to 13 from 13 to 31 (S1=S2) 31+31 (S1=S2
(S1=S2)
Ø 43
C32 30 kW from 0,5 to 7 from 7 to 24 (S1=S2) 24+24 (S1=S2)
(S1=S2)

35 kW ---- ---- ----

Ø 43
24 kW from 0,5 to 13 from 13 to 31 (S1=S2) 31+31 (S1=S2
(S1=S2)
Ø 43
C42 30 kW from 0,5 to 7 from 7 to 24 (S1=S2) 24+24 (S1=S2)
(S1=S2)

35 kW ---- ---- ----

Ø 43
from 1/24 to 1/56 1+56
24 kW from 1/0,5 to 1/24
(S1= 1m+S2) (S1= 1m+S2)
(S1= 1m+S2)
Ø 43
from 1/20 to 1/50 1+50
C52 30 kW from 1/0,5 to 1/20
(S1= 1m+S2) (S1= 1m+S2)
(S1= 1m+S2)

35 kW ---- ---- ----

Ø 43
from 1/24 to 1/56 1+56
24 kW from 1/0,5 to 1/24
(S1= 1m+S2) (S1= 1m+S2)
(S1= 1m+S2)
Ø 43
from 1/20 to 1/50 1+50
C82 30 kW from 1/0,5 to 1/20
(S1= 1m+S2) (S1= 1m+S2)
(S1= 1m+S2)

35 kW ---- ---- ----

Ø 43
from 24 to 56 56
24 kW from 1 to 24
(S2) (S2)
(S2)
Ø 43
from 20 to 50 56
B22 30 kW from 0,5 to 20
(S2) (S2)
(S2)

35 kW ---- ---- ----

S1=AIR S2 =EXHAUST FLUE

Page. 30 of 63
3.4 OLD C&M BOILER RANGE REPLACEMENT
All accessories are available for the replacement of old C&M boiler.
- Hydraulic kit
- Exhaust flue kit
3.4.1 Replacement Celtic boiler by TALIA

Kit installation for Celtic replacement


Celtic on the wall Celtic removing Installation of the
from the wall and preffiting kit
paper template
adjustment

All accessories
permit a good
replacement with
facilities :
- easy
- aesthetic
- fast
Under view of the tap handing kit with - clean
good access for all installation, drain
Installation of the Installation of the and cold water inlet taps
new Talia tap handing kit

For a lateral exhaust flue, it’s necessary to use exhaust flue accessories to reach the existing hole.
The wall hole position is a bit different but the solution is very simple.
• For the LATERAL SOLUTION, two 20° elbows are necessary

Page. 31 of 63
3.4.2 Replacement Centora boiler by TALIA
- adaptation kit for pipes
- adaptation kit for exhaust flue

Centora on the Celtic removing Installation of the Installation of Installation of the


wall from the wall and preffiting kit with the new Talia tap handing kit
paper template Centora replacement kit
adjustment
Two possibilities of exhaust flue : REAR or LATERAL solution:
• For the REAR SOLUTION, just an adaptor is necessary

• For the LATERAL SOLUTION, the 20° elbow and the adaptor are necessary.

Page. 32 of 63
3.5 COMPETITORS REPLACEMENT
3.5.1 Replacement SOUNIER DOUVAL boiler by TALIA
Only the hydraulics connections need the replacement kit.
For this substitution, the exhaust flue doesn’t need any special component.

3.5.2 Replacement ELM GVM boiler by TALIA


All accessories are available for the replacement of ELM boiler.
- The hydraulics connections need the replacement kit.
- The exhaust flue, for the LATERAL SOLUTION, the 15° elbow and the adaptor are
necessary.

Page. 33 of 63
3.6 ELECTRICAL CONNECTIONS
3.6.1 Installer zone
Also for the electrical connections, has been created an installer zone, in Frontal Panel rear side, for an easy
access to the PCB box where all the connections with the external devices can be easily done.

Remote connections PCB position for e- External clip ins PCB for
for double room bus interface position teleassistance
thermostat and wired modem (e-bus
external probe interface included)

Page. 34 of 63
3.6.2 Thermoregulation device connections

Wired
Multizones Wired
regulation Modulating
manager devices

Modulating
room sensor

Remote control

Room Wired on/off


thermostat devices

Room
thermostat

External device
External probe

Wireless

External sensor External


Wireless device

Remote control Wireless


Modulating
devices
Room sensor

Room Wireless on/off


thermostat devices

Page. 35 of 63
3.7 INSTALLATION SETTING & FUNCTIONS
3.7.1 The personalisation Menu
The boiler can start & work without any setting.
The menu gives the installer the opportunity to personalise every installation (external storage, monozone,
multizone, solar …) as preferred.

0 Language, days and time settings Chrono


End user • Timer program functions
2 Boiler parameters
3 Solar and storage
Installer 4 Zone 1 parameters : Heating
Technical 5 Zone 1 parameters : Heating Installation
service 6 Test and utility personalization

8 After sales service parameters

Parameter
check

3.7.2 Automatic air purge function


A special function to purge the residual air inside the primary circuit
after a filling cycle or an intervention on the heating circuit with the
following advantages:
ƒ Less noise inside of the heating system and radiators
ƒ Fast installation phase
ƒ No air inside the heating circuit
ƒ Good condition working

This function can be activated by the installer by pressing of “Esc”


key for 5 sec continues till to the finish (about 6’ ) or pressing of
“Esc” key) digits shows : P1

The aim is to help to purge the residual air inside


the primary circuit after a filling cycle. At the
activation the following cycle is begun and can
be repeated several times, till the boiler and the
heating system are completely purged from air.

Page. 36 of 63
3.7.3 Flue cleaner function
This function is used to perform proper boiler combustion
analysis and maximum and minimum gas calibration

Pressing the button reset for 5 sec will start two possible
conditions:
Boilers on “winter” mode, the 3 way valve is positioned on
“heating” and the burner turns on even without heating request.
Boiler on “”summer” mode, the burner turn on with the 3 way
valve in heating position and is possible to work also in DHW
after opening the tap (cooling the system).

3.8 SYSTEM PREDISPOSITION

Remote connections PCB position for e- External clip ins PCB for
for double room bus interface position teleassistance
thermostat and wired modem (e-bus
external probe interface included)

CLIP IN 2 relé CLIP IN 2 zones +DHW


mixing valve + solar

Page. 37 of 63
3.8.1 Clip IN in 2 relés
This small pcb represents an easy solution to manage two different devices (pump or valve zones) for:
- Big installation with necessity to manage a further pump (it remains unused the second relé)
- A double zone installation
Furthermore, using the double zones timer integrated in the boiler and two simple room thermostat or room
sensor, the installer can give the client a very complete and customized solution with the maximum level of
installation easiness.

Page. 38 of 63
3.8.2 Clip IN in solar
Solar installation with natural circulation configuration
This configuration ensures the same advantages of the previous Clip IN but furthermore can manage an
electrical DHW mixing valve before the boiler to control a possible DHW input by a solar source to protect the
boiler and improve the behaviour of the boiler in these conditions (outlet DHW T stability)

Page. 39 of 63
Solar installation with forced circulation configuration in serie

A complete forced circulation solar installation management is possible thank to the boiler predisposition and
the integration of this small PCB, for serial & parallel configuration

There is the possibility to control the solar installation with the connection of the collector sensor, the storage
sensor and the DHW outlet temperature that can be controlled in the best way using an external electrical
mixing valve with a control directly on the frontal boiler interface

Page. 40 of 63
Solar installation with forced circulation configuration in parallel

A complete forced circulation solar installation management is possible thank the boiler predisposition and
the integration of this small PCB, for serial & parallel configuration

There is the possibility to control the solar installation with the connection of the collector sensor, the storage
sensor and the DHW outlet temperature that can be controlled in the best way using an external electrical
mixing valve with a control directly on the frontal boiler interface

Page. 41 of 63
4 EASY TO MAINTAIN
TALIA is easy to maintain. Thanks to frontal access for all components, the boiler is able to offer reduced
maintenance time and most of the work can be performed without using tools.
It is also possible to inspect the burner without having to remove it, and the injector distribution ramp may be
accessible from the front of the appliance.
The digital interface creates a link between the Assistance Service and the end user, in fact the data and
telephone number of the relevant Assistance Centre can be entered so that the user may then read it from
the display using the “INFO” button.

Furthermore, when an operating anomaly occurs, the display shows the corresponding error code with an
explanation and the information which may then be relayed to the Assistance Service so that the technician
is well prepared with the necessary material when coming to repair the appliance.

MAIN ADVANTAGES FOR THE SERVICE TECHNICIANS

a. All components may are accessible from the front;


b. Maintenance times are reduced;
c. Maintenance work can be performed on most of the components inside the boiler without the use of tools;
d. Front access to the injector distribution ramp which facilitates gas conversion;
e. The burner can be inspected and cleaned without being removed;
f. Ceramic single block for positioning the ignition electrodes;
g. Temperature contact sensors;
h. Multifunctional digital interface with the following integrated functions:
ƒ display of error codes;
ƒ informative text which makes controlling the boiler extremely simple;
ƒ display of central heating system pressure;
ƒ display of the ON burner and corresponding power level;
ƒ combination of the boiler with solar panels;
ƒ outdoor temperature monitoring °C (with outdoor sensor connected);
ƒ indoor temperature monitoring °C (with indoor sensor connected);
ƒ display of the number of months until the next scheduled maintenance operation.
i. Modulating circulation pump which varies its speed according to the requested flow temperature;
j. Automatic bypass;
k. Anti-freeze protection system for the heating and hot water circuit;
l. Limescale protection;
m. Circulation pump and three-way valve anti-sticking system;
n. “AIR PURGE” function facilitates the elimination of any air bubbles present in the heating circuit;
o. “CHIMNEY SWEEP” function enables flue gas analysis;
p. Inspection points for flue gas analysis accessible from the outside;
q. Flue gas pressure switch signal points accessible from the outside;
r. Heating return filter;
s. Domestic cold water inlet filter;
t. Heating system drain tap.

Page. 42 of 63
4.1 DIAGNOSTIC
The new display fitted in this boiler range is very useful for describe boiler faults.
Different indications indicate which type of error it is and what you have to do (reset, no reset …….)
A little text describe perfectly the type of error and it is a real benefit for the after sale service to save time.
There are two types of errors for malfunctions:
- Shutdown (solved by resetting);
- Safety stop (No Reset: the boiler will start working again properly when the cause is removed).
There is a third type of error code that is used to indicate a malfunction that does not stop the boiler which continues to
work properly (Indication).
The Shutdown and the Safety stop are alternatively displayed with the respective error code and the writing "Err."
4.1.1 Error codes
The error codes are divided in seven different functional units, in other words the first figure indicates which functional
unit of the boiler is involved in the error:

1 XX Primary circui Boiler in lookout


(push Reset
2 XX DHW circuit button)
3 XX Electronic PCB
4 XX Communication with peripherals
5 XX Ignition and detection
Error code
6 XX Air inlet / Exhaust flue outlet
7 XX Zones Boiler in Shutdown or in
Safety stop Error description

NOTE
For more details please, see the Training Manual.

4.1.2 Complete information on boiler status

A Menu totally dedicated to the maintenance


service gives, together with the info button a
complete series of information concerning the
boiler status.

The Menu 8 in particular is useful to set the


periodical maintenance intervention warning
and the name and the telephone number of
the Technical service always available for the
end user when he access to the Info button. Example : Menu 850
A menu totally dedicated to the maintenance Month for next maintenance
service give. Next time in 10 month
(example)

Service
Months\rto Next Maintenance
Mainten On Days Act
Maint Warn Reset MENU 8 Error History
Boiler status Last 10 Errors with date
Boiler Temperature Reset Error List
Solar & Storage
Service
Statistics
Service Contact Error History
Service Name Service Contact
Service Phone Nr

Page. 43 of 63
4.2 MSA: MODULAR SYSTEM APPROACH & BOILER OVERVIEW

A modular strategy based on :


¾ A functional approach
¾ A common and modular structure
¾ A common and modular hydraulic group
¾ Common layout
¾ Common & selected components

The best results in terms of easiness & rapidity in the maintenance activity:
• Immediate & well approach
• Access to all components without dismantling any others components
• Installation inside the hanging without any problem
• Reduced maintenance time
• Reduced complexity in spare parts management
• Selected & tested components in terms of quality

Combustion group
Hydraulic group

Main PCB

interface

Page. 44 of 63
4.2.1 Open chamber overview

LEGEND
1. Flue gas exhaust duct collar 8. Spark generator
2. TTB safety Burner 9. Safety valve
3. Safety thermostat (overheating) 105°C 10. Control panel
4. Primary exchanger flow sensor 11. Modulating circulation pump with automatic deaerator
5. Detection and ignition electrodes 12. Primary exchanger inlet sensor
6. Gas valve 13. Primary heat exchanger
7. Domestic hot water flow sensor

Page. 45 of 63
4.2.2 Sealed chamber overview

LEGEND
1. Air inlet for twin pipe systems 10. 3-bar safety valve
2. Air pressure switch 11. Control panel
3. Condensate collection pipe 12. Modulating circulation pump with automatic deaerator
4. Safety thermostat (overheating) 105°C 13. Primary exchanger inlet sensor
5. Primary exchanger flow sensor 14. Primary heat exchanger
6. Detection and ignition electrodes 15. Modulating fan
7. Gas valve 16. Flue gas analysis inspection point
8. Domestic hot water flow sensor 17. Coaxial exhaust collector
9. Igniter

Page. 46 of 63
4.2.3 Hydraulic diagram

LEGEND
1. Primary exchanger 15. Heating system return filter
2. Safety thermostat (overheating) 105°C 16. Pressure gauge
3. Primary exchanger flow sensor 17. Output flow regulator (optional)
4. Burner 18. 3-way diverter valve
5. Ignition electrodes 19. Modulating circulation pump with deaerator
6. Gas valve 20. Flame detection electrode
7. Secondary exchanger 21. Expansion vessel
8. Domestic hot water flow sensor 22. Primary exchanger inlet sensor
9. Bypass
10. 3-bar safety valve A Heating system output flow
11. Boiler drain valve B Domestic hot water flow
12. Domestic hot water inlet filter C Gas inlet
13. Filling tap (no French market) D Domestic cold water inlet
14. Hot water flow meter E Central heating return

Page. 47 of 63
4.2.4 Hydraulic circuit

LEGEND
1 Expansion vessel 7 3-bar safety valve
2 Primary heat exchanger 8 Hot water flow meter
3 Safety thermostat (overheating) 105°C 9 Modulating circulation pump with deaerator
4 Primary exchanger flow sensor 10 3-way diverter valve motor
5 Secondary exchanger 11 Primary exchanger inlet sensor
6 Boiler drain valve

Page. 48 of 63
4.2.5 Hydraulic assembly

FRONT VIEW

LEGEND
1. 3-way diverter valve 8. Electronic hot water flow meter sensor
2. Secondary exchanger 9. Filling tap (no French market)
3. Domestic hot water flow sensor 10. Heating system return filter
4. Hot water from the primary exchanger 11. Modulating circulation pump
5. 3-bar safety valve 12. Deaerator
6. Bypass 13. Cold water towards the primary exchanger
7. Hot water flow meter 14. Boiler drain valve

4.2.6 By pass
Auto regulation of the heating losses especially when there are thermostatic valves on the radiators
Good protection of CH exchanger to avoid thermal shocks over temperature

Page. 49 of 63
4.2.7 New proportional flow meter
The turbine announces in real time the possible variation of flow and by means of the probes, the regulation
is modified instantaneously to have always constant temperatures.
In DHW mode, with a water flow >1.6l/min, the turbine give the information to the electronic to start ignition phase.
It’s possible to remove it easily by the front without using any tool.

A B C D

LEGEND
8 Reed sensor
A Flow regulator (optional) 8/10lt – 24/28kw
B Flow meter/filter cold water inlet container
C Turbine
D Flow meter cap

Page. 50 of 63
4.2.8 Hydraulic group maintenance
The new Hydroblock designed by Chaffoteaux stands out due to the frontal access to all main components
and their removal without the use of tools. These features offer a substantial reduction in maintenance times.

COMPONENT DISTINCTIVE FEATURE ADVANTAGES


ƒ Boiler drain valve

Reduction in labour time by


Built into the boiler and accessible
avoiding having to open the boiler
from the outside
and drain the entire system

ƒ Heating filter
Reduction in labour time thanks to
Built onto the hydraulic assembly front access during cleaning
procedures

ƒ Cold water inlet filter


Reduction in labour time thanks to
Built onto the hydraulic assembly front access during cleaning
procedures
ƒ Heating temperature sensors
May be replaced without having to
drain the boiler, with massive
In-contact type
reductions in maintenance
procedure times
ƒ 3-way motorised valve head
May be replaced without having to
drain the boiler, with massive
Coupling type with clip
reductions in maintenance
procedure times

ƒ Automatic bypass
Built onto the hydraulic assembly
Easy access reduces labour time
and accessible from the front

ƒ Safety valve

Built onto the hydraulic assembly


Easy access reduces labour time
and accessible from the front

Page. 51 of 63
4.2.9 Combustion group CF

LEGEND
1. TTB safety 6. Spark generator
2. Burner 7. Manifold
3. Detection and ignition electrodes 8. Primary heat exchanger
4. Gas valve 9. Deflector
5. Gas pipe

Page. 52 of 63
4.2.10 Combustion group FF

LEGEND
1. Pressostat 6. Spark generator
2. Burner 7. Manifold
3. Detection and ignition electrodes 8. Primary heat exchanger
4. Gas valve 9. Fan
5. Gas pipe

Page. 53 of 63
4.2.11 Combustion group maintenance

COMPONENT DISTINCTIVE FEATURE ADVANTAGES


ƒ Sockets for exhaust flue/air inlet
analysis

Built into the boiler and accessible Reduction in labour time as the
from the outside boiler does not have to be opened

ƒ Sockets for pression analysis

Built into the boiler and accessible Reduction in labour time as the
from the outside boiler does not have to be opened

ƒ Gas burner
Front access facilitates gas conversion

ƒ Air pressure switch area

Clips fixation Removing without the use of tools

ƒ Ignition and ionisation electrodes

Ceramic single block Positioning the electrodes easily

ƒ Fan

Page. 54 of 63
5 BOILER CODES
DIMENSIONS MARKETS
CODE MODEL EE
L l h FR BE IT PI
HMO
3650177 TALIA 25 CF N BE 745 440 380 X
3650178 TALIA 25 FF N BE 745 440 380 X
3650179 TALIA 30 CF N BE 745 440 380 X
3650180 TALIA 30 FF N BE 745 440 380 X
3650181 TALIA 25 CF N IT 745 440 312 X
3650182 TALIA 25 CF B/P IT 745 440 312 X
3650183 TALIA 25 FF N IT 745 440 312 X
3650184 TALIA 25 FF B/P IT 745 440 312 X
3650185 TALIA 30 CF N IT 745 440 312 X
3650186 TALIA 30 CF B/P IT 745 440 312 X
3650187 TALIA 30 FF N IT 745 440 312 X
3650188 TALIA 30 FF B/P IT 745 440 312 X
3650189 TALIA 25 CF N EAA 745 440 380 X
3650190 TALIA 25 FF N EAA 745 440 380 X
3650191 TALIA 30 FF N EAA 745 440 380 X
3650192 TALIA 35 FF N EAA 745 440 380 X

Page. 55 of 63
6 ACCESSORY CODES
6.1 INSTALLATION ACCESSORIES

DESCRIPTION COD

• “BARRETTE” KIT

IT MARKET 3678350
FR MARKET
3678360

BE MARKET 3678364

ES/PT MARKET 3678354

• PIPES FOR NEW INSTALLATION


“BARRETTE” KIT 3318323
IT MARKET

• PIPES FOR “BARRETTE” KIT


(with rear chassis) 3318253
FR MARKET

• PIPES FOR NEW INSTALLATION


“BARRETTE” KIT (with rear
chassis)
3318255
BE MARKET

• PROFESSIONAL TEMPLATE KIT


MARKET: ALL
3318248

• PLASTIC –CARDBOARD
TEMPLATE KIT 3678247
MARKET: ALL

Page. 56 of 63
6.2 TERMOREGOLATION INTERFACES
DESCRIPTION COD

• BUS INTERFACE 3318330


It allows to connect all the modulating devices

• ‘CLIP IN’ 2 ZONES HIGH


INTERFACE 3318242
To manage a Central Heating (two zones high
temperature)

• ‘CLIP-IN’ INTERFACE WITH


MIX VALVE 3318249
For Domestic Hot Water

• ‘CLIP-IN’ SOLAR PANEL


SOLARE WITH MIX VALVE 3318250
For Domestic Hot Water

• ‘CLIP-IN’ INTERFACE
1 HIGH ZONE+1 LOW
3318251
TEMPERATURE ZONE
To manage A Central Heating circuit (1 high
zone+1 low temperature zone)

• MODEM E@SY INTERFACE


WITH PLUG IN BUS ---
It allows to connect all the modulating devices
activating the E@sy)

• CLIP-OUT 3318244

Page. 57 of 63
6.3 TERMOREGOLATION ACCESSORIES

DESCRIPTION COD
WIRED WIRELESS
3318298 3318303

• REMOCOM
Allows to manage all the boiler’s functions,
shows the error codes and manage 2 Central
Heating zones.

• ROOM SENSOR 3318302 3318304


Allows to select the Central Heating mode

Wire : set the room temperature.


Wireless : set and show the room temperature

_____ 3318309
• EXTERNAL SENSOR
Allows to measure the outdoor temperature.

Wireless :It is supplied by an integrated


photovoltaic panel.

3318306
• SIGNAL RECEIVER for
modulating devices
Allows the communication between the boiler
and the wireless sensors.

3318301 3318307

• T-CONTROL on/off wireless


Allows the room temperature thermoregulation.

(CTw) (CTws)

Page. 58 of 63
• SIGNAL RECEIVER wireless
Allows the communication between the boiler --- 3318308
and the T-CONTROL.

3318300
• ROOM THERMOSTAT on/off
wired (RTw) ---
Allows the room temperature thermoregulation.

3318306
• SIGNAL REPEATER
wireless (RPws) ---
Allows the communication between the boiler
and the device when the distance is too big.

Page. 59 of 63
6.4 HYDRAULIC ACCESSORIES

DESCRIPTION COD

• MONO ZONE KIT


Box mono-zone Hight temperature 3318286
Kit + Clip in A

• MULTI ZONE KIT


Box two zone Hight temperature 3318287
Kit + Clip in A

• MULTI ZONE KIT 3318346


Box three zone Hight temperature kit

• MULTI ZONE KIT 3318288


Box two zone multi temperature kit

• MULTI ZONE KIT 3318289


Box three zone multi temperature kit

• MCD KIT 3318293


For comby boiler

Page. 60 of 63
• SOLAR KIT 3678290
Valve + solar sensor

• SOLAR KIT
Electrical mixing valve + clip in B

3678296

• SOLAR KIT
Electrical mixing valve + clip in C 3678297
+ sensor collector + sensor boiler

• REPLACEMENT KIT 3678387


Sounier Douval

• REPLACEMENT KIT 3678388


ELM

• REPLACEMENT KIT 3678391


CELTIC

• REPLACEMENT KIT 36783xx


NECTRA

• REPLACEMENT KIT 3678389


VAILLANT

• REPLACEMENT KIT 3678390


JUNKERS

Page. 61 of 63
7 TECHNICAL DATA
7.1 OPEN-CHAMBER

Model Name 25 CF 30 CF
General
CE certification (pin)
comments
Boiler type B11bs B11bs

Max./min. nominal heat input central heating (Hi) kW 25,8/11,0 29.6/13


Max./min. nominal heat input central heating (Hs) kW 28,6/12,4
Max./min. nominal heat input D.H.W. mode (Hi) kW 27/11 31.1/13
Energy performance

Max./min. nominal heat input D.H.W. mode (Hs) kW 30/12,2


Max./min. Central Heating power kW 23,7/10,1 26.9/11.7
Combustion efficiency (at flue) HI/Hs % 93,2/83,9 93.1
Efficiency of nominal heat output (60/80 °C) HI/Hs % 91,9/82,8 91
Efficiency at 30 % 47°C Hi/Hs % 91,2/82.11 90
Efficiency at minimum Hi/Hs % 90,2/81,3 90
Number of efficiency stars (Directive 92/42/EEC) no.  
Max. heat loss to the casing (∆T = 50°C) % 1,3 2.1
Heat loss through flue gas exhaust when burner operating % 6,8 6.9
Heat loss through flue gas exhaust when burner switched off % 0,4 0.4
Minimum draught Pa 4 4
NOx class 3 3
Flue gas temperature (G20) °C 137,5 119
Emissions

CO2 (G20) % 6,07 6


CO (0%O2) ppm 53 107
O2 (G20) % 9,6 9.7
Max. flue gas output (G20) kg/h 62,95 73.8
Excess air % 83,56 86
Load losses water side (max) (∆T = 20 °C) mbar
Residual head for the system bar 0,25 0.25
Central heating

Expansion vessel pre-charge pressure bar 1 1


circuit

Central Heating maximum capaciy litres 175 175


Minimum load pressure for the system bar 0,4 0.4
Maximum central heating circuit pressure bar 3 3
Expansion vessel capacity litre 8 8
Max./min. heating temperature °C 80/40 80/40
Max./min. Domestic Hot Water temperature °C 60/36 60/36
D.H.W. circuit

Specific output of D.H.W. system (10 min. with ∆T=30°C) litres/min 11,05 13.5
D.H.W. flow rate ∆T=25°C litres/min 13,8 16.2
D.H.W. flow rate ∆T=35°C litres/min 9,9 11.6
Comfort performance stars (EN13203)  
D.H.W. minimum flow rate litres/min 1,6 1.6
Max./min. Domestic Hot Water pressure bar 6 6
Electrical Power supply voltage/frequency V/Hz 230/50 230/50
and Total power consumption W 84,6 100
environment Minimum operating temperature °C X4D X4D
data Electrical system grade of protection IP 5 5
Weight and Weight Kg 32 32
dimensions Dimensions (W x H x D) with tap handing kit mm 440x793x420

Page. 62 of 63
7.2 SEALED-CHAMBER

Model Name
35 FF
25 FF 30 FF
General DRAFT
comments CE certification (pin)
Boiler type C12-C32-C42-C52-C62-B22-B32

Max./min. nominal heat input central heating (Hi) kW 25,8/11 30/13 34,4/14
Max./min. nominal heat input central heating (Hs) kW 28,6/12,2 33,3/14,4
Max./min. nominal heat input D.H.W. mode (Hi) kW 27/11 31,3/13 36/14
Energy performance

Max./min. nominal heat input D.H.W. mode (Hs) kW 30/12,2 34,7/14,4


Max./min. Central Heating power 24/9,5 28/11,6 13,2/32,3
Combustion efficiency (at flue) % 95,4/85,9 94,8/85,4 94,7
Efficiency of nominal heat output (60/80 °C) HI/Hs % 94,3/84,9 93,6/84,3 93,6
Efficiency at 30 % 47°C Hi/Hs % 93,2/83,9 93,7/84,4 91,1
Efficiency at minimum Hi/Hs % 90,4/81,4 --- 89
Number of efficiency stars (Directive 92/42/EEC) no.   
Max. heat loss to the casing (∆T = 50°C) % 1,1 1,6 1,2
Heat loss through flue gas exhaust when burner operating % 4,6 5,2 5,3
Heat loss through flue gas exhaust when burner switched off % 0,2 0,2 0,4
Residual discharge head mbar 1,0 0,75
NOx class 3 3 3
Flue gas temperature (G20) °C 108,8 100 108
Emissions

CO2 content (G20) % 7,14 6,89 7


CO content (0%O2) ppm 97 76,6 95
O2 content (G20) % 7,68 8,51 8
Max. flue gas output (G20) kg/h 57,68 60,3 74
Excess air % 57,62 60,99 61
Load losses water side (max) (∆T = 20 °C) mbar 200 200 200
Central heating

Residual head for the system bar 0,25 0,2 0,25


Expansion vessel pre-charge pressure bar 1 1 1
circuit

Minimum load pressure for the system bar 0,4 0,4 0,4
Maximum central heating circuit pressure bar 3 3 3
Expansion vessel capacity litres 8 8 8
Max./min. heating temperature °C 80/40 80/40 80/40
Max./min. Domestic Hot Water temperature °C 60 / 36 60 / 36 60 /36
D.H.W. circuit

Specific output of D.H.W. system (10 min. with ∆T=30°C) litres/min 12,1 14 16
D.H.W. flow rate ∆T=25°C litres/min 14,5 16,3 19,2
D.H.W. flow rate ∆T=35°C litres/min 10,4 12 13,7
Comfort performance stars (EN13203)   
D.H.W. minimum flow rate litres/min 1,6 1,6 1,6
Max./min. domestic hot water pressure bar 6 6 6
Electrical Power supply voltage/frequency V/Hz 230/50
and Total power consumption W 126 138 151
environment Minimum operating temperature °C 5 5 5
data Electrical system grade of protection IP X4D X4D X4D
Weight and Weight kg 31 31 33
dimensions Dimensions (W x H x D) with tap handing kit mm 440x793x420

Page. 63 of 63

You might also like