You are on page 1of 3

WT 700

Hubarbeitsbühne WT 700

Produktbeschreibung Serienausstattung • Diagnose- und Informations- • Schutzhaube über Korbsteuer-


• Teleskophubarbeitsbühne mit • ausschiebbarer Aluminium- system (Graphikdisplay) pult
vierfachem Teleskopausschub arbeitskorb • automatische Drehzahlanhe- • Hintergrundbeleuchtung der
und einfach teleskopierbarem • drehbarer Arbeitskorb, 2 x 80° bung bei Joystick-Betätigung Korbsteuerung
Korbarm, der neben den • Korbwechselsystem • Endlagendämpfung aller • Zweitsteuerung an der Basis als
Teleskopen hinter dem • Ösen für Sicherheitsgurte im Bewegungen Notsteuerung nutzbar
Fahrerhaus abgelegt wird Arbeitskorb • Notablass-System vom Korb • Korbaufsetzsicherung
• schwenkbare H-Stützen vorne, • stabile Fahrgestellabdeckung aus
teleskopierbare H-Stützen Aluminium-Duettblech
hinten • Aluminium-Bordwände
• aufgebaut auf Fahrgestell • 4 Unterlegbohlen mit Halterung
ab 33 t Gesamtgewicht mit • Hydraulik-Regelpumpe
4 Achsen (8 x 6 Konfiguration • Wechselsprechanlage
auf Anfrage) • elektronischer Windmesser
• Motor-Start/Stop von allen
Besonderheiten Bedienpulten
• stabiler, teleskopierbarer Korb- • Elektro-Leitung 230 V/10 A zum
arm mit hängender Korbanbin- Arbeitskorb mit FI-Schalter
dung zum besseren Überfahren • Reserveradhalterung
von Hindernissen • Kotflügel für Hinterräder
• hohe Drehsteifigkeit der • hochwertige 2K Acryl-
Korbaufhängung Lackierung
• großer Drehbereich des • Aufbau des Gerätes auf ein
hydraulisch ausschiebbaren geeignetes Fahrgestell
Arbeitskorbes • baumustergeprüft, CE-Zeichen,
• weicher und ruckfreier Aus- EG-Konformitätserklärung,
schub der Teleskope durch Prüfbuch
optimierte Gleitlager und ver- • Abnahme gem. StVZO
formungssteife Sechseckprofile • Elektrohydropumpe
• feinfühlige, elektro-hydraulisch • halbautomatisches Abstützen
geregelte Proportionalsteue- und Einfahren
rung mit modernster • Korblastüberwachung nach
CAN-BUS-Technologie EN 280
• zwangsgesteuerte elektronisch- • umfangreiches Korrosions-
hydraulische Parallelführung schutzpaket
des Arbeitskorbes • Sitzmöglichkeit im Arbeitskorb
• elektronische Lastmomentbe- • Werkzeugablage im Arbeitskorb
grenzung (LMB), gibt in Abhän- • Memory-Funktion
gigkeit vom jeweiligen Abstütz-
modus die dazugehörige Zusatzausrüstung
Lastkurve frei • Höhenbegrenzung
• wartungsfreie Lager • Halterung für TV-Kabel
• optimaler Schutz aller Steuer- • Verkehrshüte mit Halterung
und Versorgungsleitungen • mobile Zweitsteuerung
vor äußeren Beschädigungen, • Gerätekasten
dadurch Vermeidung von • benzingetriebener Generator
Ausfällen und kostenintensiven • WUMAG ELEVANT Service-Tele-
Reparaturen Link
• Arbeitsscheinwerfer
Einsatzbereich • E-Antrieb 400 V
• Vermietfirmen • Bioöl
• Energieversorger Technische Daten WT 700 Abmessungen des Arbeitskorbes • Ausrüstung für Erdung
• Antennenbauer (L x B x H) 3,88 m x 1,05 m x 1,10 m • Parallelfahrt
• Betreiber von Windkraft- Arbeitshöhe max. 70,00 m Fahrzeuggesamtlänge* ca. 14,20 m • Trenngitter
anlagen Korbbodenhöhe max. 68,00 m Durchfahrthöhe* ca. 3,96 m • Stromerzeuger
• Glas- und Gebäudereiniger Seitliche Reichweite** max. 32,00 m Gesamtgewicht* min. 33 t • Bordwände
• Telekommunikations-
Nennlast im Arbeitskorb max. 1000 kg
unternehmen (weitere Ausrüstung auf Anfrage)
Schwenkbereich mit * abhängig vom Fahrgestell
• Sanierungs- und Restaurie-
Endlagendämpfung 500° ** abhängig von Schwenkwinkel,
rungsunternehmen
Schwenkbereich Korbarm 175° Fahrgestell, Art der Abstützung und
• TV- und Filmproduzenten
Drehbereich Drehkorb 2 x 80° Korblast Ausstattungs- und technische Änderungen
aus Gründen der Weiterentwicklung vorbe-
halten.

WUMAG ELEVANT GmbH & Co. KG


Postfach 93 19 · 47750 Krefeld
Düsseldorfer Straße 100 · 47809 Krefeld (Linn)
DEUTSCHLAND / GERMANY
Tel: + 49 2151 526-200 · Fax: + 49 2151 526-230
e-mail: elevant@wumag.de · Internet: www.wumag.de

WUMAG GmbH WERK EBERSBACH


Johann-Andreas-Schubert-Str. 6 · 02730 Ebersbach
DEUTSCHLAND / GERMANY
Tel: + 49 3586 7809-0 · Fax: + 49 3586 7809-54
e-mail: werk-ebersbach@wumag.de · Internet: www.wumag.de
Mobile elevating work platform WT 700

Product information • Anchor points for safety • End-stop damping of all • Illumination of the control
• Telescopic mobile elevating harnesses movements panels
work platform with a 5-section • Diagnosis and information • Emergency lowering • Secondary control at the base;
extension boom and a telescopic system (graphic display) system in the cage utilisable as emergency control
cage boom; cage placed behind • Automatic r.p.m. control via • Protective cover for the control • Cage contact safeguard
the driver’s cab next to the joystick panel • Stable chassis covering of
telescopes aluminium bulb plate
• ”Swing-out” stabilisers at the • Aluminium side walls mounted
front, telescopic H-type on the chassis decking
stabilisers at the rear • 4 Spreader plates with bracket
• Assembled onto 33 t G.V.W. • Hydraulic pump
with 4 axles (8 x 6 configuration • Intercom system
on request) • Electronic anemometer
• Engine start/stop from all
Special features control panels
• Sturdy telescopic cage boom, • Electric power line 230 V/10 A
with the cage top-mounted to with residual current operated
improve manoeuvrability over device
obstructions • Bracket for the spare wheel
• High torsion stiffness of the • Mud guards for the wheels
cage console • High quality 2-Component
• Large area of movements acrylic paintwork
for cage rotation of the • Assembly of the platform onto
hydraulically extendible cage a suitable chassis
• Smooth and jolt free running of • Tested by a notified body,
the telescopes by optimised CE-Mark, Declaration of
slide bearings and deformation Conformity, Test certificate
resistant hexagon profiles • Check according to local vehicle
• Finely adjustable and robust and traffic regulations (StVZO)
electronic-hydraulic controls by • 24V Battery pump
CAN-BUS technology • Semi-automatic stabilising
• Forced guide control of the system
electronic-hydraulic cage • Cage overload prevention system
levelling system; examination according EN 280
of the control signals via SPC • Extensive anticorrosive package
• Electronically controlled • Seat in the cage
“Load moment limiting system” • Tool compartment in the cage
defines the working envelope, • Memory function
depending on current cage load
and stabiliser configuration Additional equipment
• Bearings are maintenance free • Height limitation
• Optimal protection of all • Automatic stabilising system
supply- and control lines from • Road marker cones with bracket
external damage, prevents • Mobile secondary control
breakdowns and costly repairs • Material box
• Petrol engine driven generator
Operation areas • WUMAG ELEVANT Service-Tele-
• Rental companies Link
• Power supply companies • Halogen working lights
• Antenna construction • Electric drive 400 V
• Inspection of wind power stations • Biologic hydraulic oil
• Glass and exterior cleaning Technical Data WT 700 Measurements of the cage • Earthing equipment
• Telecommunication companies (L x W x H) 3,88 m x 1,05 m x 1,10 m • Parallel drive function
• Renovation and restoration Working height max. 70,00 m Travelling length* approx. 14,20 m • Electric generator
companies Cage floor height max. 68,00 m Travelling height* approx. 3,96 m • Fixing for TV-cable
• TV and film work Sideways outreach** max. 32,00 m G.V.W* min. 33 t • Bordering of the platform
Cage load max. 1000 kg decking
Standard equipment Turntable rotation with * depending on the vehicle
• extendible aluminium cage end-stop damping 500° ** depending on pivoting angle, (More additional equipment on
• Rotatable cage, 2 x 80° Cage boom angle 175° vehicle, type of stabilisation request)
• Possibility to change the cage Swivel range of the cage 2 x 80° and cage load
We reserve our right for alterations in tech-
nology, development and equipment without
prior notice.

WUMAG ELEVANT GmbH & Co. KG


Postfach 93 19 · 47750 Krefeld
Düsseldorfer Straße 100 · 47809 Krefeld (Linn)
DEUTSCHLAND / GERMANY
Tel: + 49 2151 526-200 · Fax: + 49 2151 526-230
e-mail: elevant@wumag.de · Internet: www.wumag.de

WUMAG GmbH WERK EBERSBACH


Johann-Andreas-Schubert-Str. 6 · 02730 Ebersbach
DEUTSCHLAND / GERMANY
Tel: + 49 3586 7809-0 · Fax: + 49 3586 7809-54
e-mail: werk-ebersbach@wumag.de · Internet: www.wumag.de

You might also like