Professional Documents
Culture Documents
Tracey Concrete offer a diverse range of Cable Trough Systems designed to protect and hold any
necessary utility services. Manufactured from reinforced precast concrete, cable troughs are a great
alternative to traditional methods of simply burying service lines as they allow quick access for maintenance
and
security.
Electrical, Power Station, Waste Water & sewage, Highway, Rail and Domestic are all just some applications for
our Cable Trough Systems.
Advantages:
• Assured performance
• Bespoke items Main photo withPrecast Concrete Lid. Topright with Steel Lid. Bottom right with GRP Cover.
A B C D E F H I J
SP 350 X 300 LD * 1000 340 296 500 609 365 372 SP 350** 500 467 100 56 2 tonnes Key
SP 350 X 300 MD * 1000 340 296 500 609 365 372 SP 350** 500 467 100 60 5 tonnes Key
SP 600 X 300 LD * 1000 585 296 500 854 610 425 SP 600** 500 712 100 85 2 tonnes Key
SP 600 X 300 MD * 1000 585 296 500 854 610 425 SP 600** 500 712 100 90 5 tonnes Key
SP 400 X 400 MD * 1000 380 400 654 700 410 570 SP 400** 500 512 100 62 5 tonnes Deha
SP 600 X 600 MD * 1000 570 600 854 900 610 787 SP 600** 500 712 100 90 5 tonnes Deha
SP 1000 X 1000 MD * 1000 960 1000 1304 1426 1036 1565 SP 1000** 500 1242 150 225 5 tonnes Deha
SP 1000 X 510 MD * 1000 1000 510 814 1426 1036 1055 SP 1000** 500 1242 150 225 5 tonnes Deha
* Also available with reduced rebate to take
GRP lids with a side wall hole for the entry / exit of Medium Duty Units have been subjected to test loads
services. from 15kN (pedestrian) up to 400kN
For use in car parks and access roads
(heavy duty). This test data, together
** These lid sizes are available in GRP (Pedestrian), galvanised steel subject to occasional commercial vehicle
with our unrivalled experience of Access
(11.5T), and steel lids suitable for infill with paving or concrete. traffic e.g access to works and plants.
Ducting in trafficked situations, has
Maximum wheel loading of five tonnes.
enabled us to help our clients to select
Trafficking Application Classes CharconSpecialist Heavy Duty the best product for their application.
Products offers a rangeoflidstosuitallyourtrafficking
Steel lidded units offer a maximum All lifting devices for the troughs and lids
wheel load of 11.5 tonnes which can are available from the Charcon Sales
application needs. Each lid has the
be used for lorry parks and kerbsides Office.
necessary lifting inserts to facilitate lifting
(non - public highways) e.g. all road-going
when accessing the ducts at a future date.
vehicles up to 15 mph max.
Trafficking Application Classes are as It is strongly advised that you select a
follows: higher grade of unit if channelised
Light Duty trafficking or an excessive amount of
commercial traffic is anticipated.
For use in private driveways and grassed areas
e.g. parkland maintained with mowing Loading test data and trafficking
equipment. Maximum wheel loading of two application classes are based on
tonnes. linear drainage standard DIN 19580
which forms the basis of a draft
European Standard.
90 degree units
o Angle Iron Lid Support
A B C D E F G H I J
SP 350 X 300 * 1071 340 445 500 609 365 1054 580 SP 350** 500 467 100 56 2 tonnes Key
SP 350 X 300 * 1071 340 445 500 609 365 1054 580 SP 350** 500 467 100 60 5 tonnes Key
SP 600 X 300 * 1071 585 445 500 854 610 1299 660 SP 600** 500 712 100 85 2 tonnes Key
SP 600 X 300 * 1071 585 445 500 854 610 1299 660 SP 600** 500 712 100 90 5 tonnes Key
Tee units
1000 340 445 500 609 365 1054 530 SP 350** 500 467 100 56
1000 340 445 500 609 365 1054 530 SP 350** 500 467 100 60
1500 585 445 500 854 610 1299 750 SP 600** 500 712 100 85
Stop end units
throughallfour lifting holes
from the inside wallofthe
troughunit.
Access Ducting
Stop Stop End Stop
End Dimensions End
Referenc (mm) Weight
e (kg)
A D E
4.
Transition units
Angle Iron
Lid Support
Installation Procedure
The recommended installation procedure is as follows:-
1. Prepare bed or foundation to suit ground conditions and loading.
2. Position trough to line and level.
3. Abut the next trough, the flat end face against the
installed end face. Bed and level the unit to
suit.
4. Haunch or back fill as required.
5. Repeat the procedure to form the required duct length.
6. Install the service within the duct.
7. Position the lids in each duct unit, ensuring
that there is exactly two No. per duct.
8. The units should be satisfactorily sealed using proprietary sealants
which are available from the Charcon Sales Office. Telephone 01455 288275.