Style 1101CR & 1101ER Features: ● An Economic and Space Saving way to combine a Reducing Pipe Fitting with an Expansion Joint
● Available in Concentric, Eccentric, or Custom Offset Arrangements
● Versatile Hand-Built Construction
● Standard or Custom Face to Face Dimensions
● Excellent All Directional Movement Capability
● Absorbs Noise, Vibration and Shock
Style 1101CR ● Multiple Plies of Tyre Cord Reinforcement and a Wide Variety of Tube Concentric Reducer and Cover Elastomers Available
● 121˚C Continuous Services Standard, 204˚C Available
● Standard Drillings Include: ANSI/AWWA, DIN and PN
● Integral Flange Design, No Gaskets Required
Style 1101ER Notes:
Eccentric Reducer 1. All parts listed are designed for (-1 Bar g) (full vacuum) and have a maximum test at (-0.9 Bar g) due to facility altitude and equipment limitations. 2. Maximum operating temperature of 121˚C for EPDM, Butyl, Hypalon®, and Viton®; 107˚C for Neoprene; 99˚C for Nitrile; 82˚C for Pure Gum Rubber; 149˚C for EPDM and Butyl in air services at (1.7 Bar g) maximum; higher pressure and temperature ratings available. 3. All sizes can be supplied with a filled arch reducing their movements by 50% and increasing the spring rates fourfold. Expansion Joints with ANSI/AWWA flanges have lengths (FF) in nominal inch conversions unless otherwise agreed. 4. For full product specifications and installation instructions, see SPEC 1101CR/ER and ININ 1101CR/ER 5. WARNING: Controls units (sold separately) must be used when piping is not properly anchored. Number of rods are dependent upon maximum field test pressures. Expansion joints may operate in pipelines carrying fluids at elevated temperatures and pressures, so precaution should be taken to ensure proper installation and regular inspection. Care is required to protect personnel in the event of leakage or splash. Adequate floor drains are always recommended. 6. Movements are non-concurrent. Contact PosiFlex for concurrent movements, and for sizes not shown up to 3600mm D.N. 7. Contact the PosiFlex for full details including availability of larger sizes, higher pressure and temperature ratings, as well as additional arches. All sizes are designed for (-0.5 Bar g) vacuum, full vacuum (-1 Bar g) designs available. 8. Gross weights include retaining rings. Datasheet 3.0 of 17 Style 1101 CR Style 1101 ER Concentric Reducer Eccentric Reducer
CONCENTRIC ECCENTRIC LARGE END
LARGE SMALL Shortest Shortest FLANGE MAX MOVEMENTS GROSS End End Length Length TH. Pressure Comp. Ext. Lateral Angular Torsional Weight D.N. D.N. (F/F) (F/F) (mm) (Bar g) (mm) (mm) (mm) (degree) (degree) (KG)