You are on page 1of 2

MAKING ELECTRICAL

TECHNOLOGY
ITEC Guide to Hazardous Areas

WORK
PART 00
A Guide to the ITEC
Hazardous Area Guides

ITEC – Information Technology, Electronics & Controls


This leaflet has been produced by EUR ING David Stefanowicz

010409
List of Hazardous Area Guides

Part 00 A Guide To The ITEC Hazardous Area Guides


Part 01 100 Years of Designing, Installing, Testing and Commissioning
Hazardous Area Electrical Installations
Part 02 Hazardous Areas Due to Dust
Part 03 The ECA and other UK Hazardous Area Electrical Installation
Experts present Comp‘Ex’
Part 04 Hazardous Area Installations: A Client and Contractors Guide to
their Electrical and Electrotechnical Legal Obligations and How to
Comply With Them
Part 05 The ECA’s Hazardous Area Electrical Installation Company
Assessment Scheme ITEC ACCREDITED
Part 06 The Selection, Installation and Maintenance of Electrical Equipment
for use in and around buildings containing explosives
Part 07 Guide to Using MICC Cable For Data Communications In
Hazardous Areas
Part 08 A Guide to Wireless Systems and Devices in Potentially Hazardous
Areas
Part 09 A Guide to Electrical and Electronic Systems in Petrol Filling
Stations
Part 10 Generic Information and Apparatus Marking
Part 11 Guide to Electrical, Control and Communications Standards used in
Coal Mines and Quarries
Part 12 ECA Technical Assessment Pre-Assessment Check List
For Hazardous Area Extension Category E1
Part 13 A Guide to Cable Glands for use in Hazardous Areas
Part 14 A Guide to Intrinsically Safe Ethernet Systems
Part 15 A Guide to Hazardous Area Motors

While every care has been taken to ensure the accuracy of the information contained in this leaflet, neither the authors nor1the
publishers can accept liability for any inaccuracies in or omissions from the information provided or any loss or damage arising
from or related to its use.

You might also like