You are on page 1of 24

JCB LUBRICANTS | NO COMPROMISE

JCB LUBRICANTS PERFORMANCE AND QUALITY.

TO ENSURE THAT JCB OILS JCB PERFORMANCE LEVELS ARE DIFFERENTIATED


CAN OFFER THE HIGHEST BY DIFFERENT COLOR LABELS:
LEVELS OF PERFORMANCE
AND QUALITY MATCHED
TO YOUR MACHINE
WHATEVER ITS
MANUFACTURER, JCB JCB ULTRA PERFORMANCE (UP)
HAVE INTRODUCED A

Increasing level of quality and performance


RANGE OF OILS OFFERING Silver

ALTERNATIVE LEVELS
OF PERFORMANCE AND JCB OPTIMUM PERFORMANCE (OP)
QUALITY. Grey

JCB EXTREME PERFORMANCE (EP)


Black

JCB HIGH PERFORMANCE (HP)


JCB Yellow
The comprehensive range of JCB lubricants has been
recommended by JCB engineers to ensure that your engine,
transmission, hydraulic system and other key components
receive the optimum level of protection, lengthening
component life and keeping down your costs of ownership.

Industry standard approvals are also quoted to allow JCB oils


to be used in other non JCB machines.

2 JCB LUBRICANTS NO COMPROMISE


JCB LUBRICANTS NO COMPROMISE

CONTENTS
Hydraulic Fluid 04

Engine Oil 08

Gear Oil 12

Transmission Fluids 16

Ancillary Products 19

Grease 20

The Complete Range by Part Number 22

JCB LUBRICANTS NO COMPROMISE 3


HYDRAULIC FLUID.

TOP QUALITY HYDRAULIC Hydraulic fluid testing


JCB hydraulic fluids undergo a rigorous program of testing to ensure that they provide the maximum performance and protection for your
FLUID MATCHED TO YOUR JCB machine and its hydraulic system.

MACHINE’S HYDRAULIC Below are examples of how JCB hydraulic fluids outperform other hydraulic fluids that claim to be the same.

SYSTEM. MAXIMIZES
EFFICIENCY AND HELPS Demulsifying test: Foam test:
MINIMIZE DOWNTIME. JCB hydraulic fluid is designed to help prevent water contamination. This is a simple test where air is bubbled through a heated hydraulic
GENUINE JCB HYDRAULIC In the Demulsifying test the industry standard requirement is for
fluid to ascertain its resistance to foaming.

FLUIDS FEATURE HIGH hydraulic fluid and water to separate, at the latest, 30 minutes after Minimizing air bubbles in your hydraulic fluid caused by foam is
essential as air bubbles cause cavitation which in turn can cause:
QUALITY BASE OIL AND
being mixed together, so the water can be filtered out of the system.
If water is not removed quickly from the hydraulic system it can cause:
• Spongy hydraulic control response.
SOPHISTICATED ADDITIVES, • General reduction in the efficiency of the hydraulic fluid. • Heat retention (overheating) in the hydraulic fluid tank.

WHICH HELP TO MAXIMIZE • Component corrosion.


• Reduction in viscosity and subsequent premature
• Poor oil flow around the hydraulic system.
• Component wear, (due to an inconsistent film of oil
COMPONENT LIFE. component wear. on components).
• Reduction in cooling properties within the hydraulic fluid. • Ultimately premature failure.

JCB oil separates from water in just 5 minutes! - Some low cost, poor It can be clearly seen that poor quality low cost oils do not contain the
Choosing anything other than the recommended JCB oil quality oils fail to separate, even after 30 minutes. In this test the same level of anti-foam additives. In this test the JCB product
is a false economy which can lead to inefficient machine JCB product clearly outperformed both the low cost clearly outperformed the low cost alternative.
operation, component wear and ultimately premature alternative and the industry standard requirement.
component failure.

4 JCB LUBRICANTS NO COMPROMISE


HYDRAULIC FLUID

JCB HYDRAULIC FLUID UP 32 JCB HYDRAULIC FLUID OP 46 JCB HYDRAULIC FLUID OP 68


JCB Ultra Performance Hydraulic Fluid 32 JCB Optimum Performance Hydraulic Fluid JCB Optimum Performance Hydraulic Fluid
is specifically developed for construction 46 is a shear stable top tier hydraulic oil, 68 is a shear stable top tier hydraulic oil,
equipment operated under wide extremes designed to give the best possible response designed to give the best possible response
of temperature. The product provides and performance for machines that require and performance for machines that require
outstanding low and high temperature a high performing hydraulic fluid. In addition a high performing hydraulic fluid. In addition
viscosity characteristics. JCB UP Hydraulic it has been developed for off-highway it has been developed for off-highway
Fluid 32 is also a long term stable fluid with equipment and other hydraulic systems equipment and other hydraulic systems
JCB STANDARD: optimum anti-wear performance. JCB STANDARD: exposed to wide temperature fluctuations. JCB STANDARD: exposed to wide temperature fluctuations.
4002/2800 4002/2000 This is a Maximum Efficiency Hydraulic Fluid 4002/2700 This is a Maximum Efficiency Hydraulic Fluid
(MEHF). (MEHF).

BENEFITS BENEFITS BENEFITS


• Ultra anti-wear performance, based on ash-less anti-wear additive technology. • Very stable viscosity behavior, due to the use of a very shear stable viscosity • Very stable viscosity behavior, due to the use of a very shear stable viscosity
• Suitable for arctic conditions due to outstanding low temperature viscosity. modifier. modifier.
• Long term stable fluid viscosity through excellent shear stability characteristics • Optimum anti-wear performance, based on a zinc dialkyldithiophosphate • Optimum anti-wear performance, based on a zinc dialkyldithiophosphate
of the selected viscosity index improver. additive. additive.
• JCB UP32 surpassed the ISO 11158 HV requirements. • Wide application temperature range through low pour point and outstanding • Wide application temperature range through low pour point and outstanding
• An ideal cold climate hydraulic fluid. low and high temperature viscosity characteristics. low and high temperature viscosity characteristics.
• Ideal for JCB machines in extreme cold climate conditions. • Trouble-free operation due to the unique combination of outstanding • Trouble-free operation due to the unique combination of outstanding
demulsibility, foam, air release, hydrolytic stability and filterability. demulsibility, foam, air release, hydrolytic stability and filterability.

PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION


DIN 51524 PART 3 CATEGORY HVLP, JCB UP32 SURPASSED THE ISO DIN 51524 PART 3 CATEGORY HVLP. DIN 51524 PART 3 CATEGORY HVLP.
11158 HV REQUIREMENTS.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS



SWEDISH DEFENCE FSD 8401, VOLVO STD 1286 07, SS 155434 ISO 11158 CATEGORY HV, SS 155434 CATEGORY AV, DENISON HF-0, ISO 11158 CATEGORY HV, SS 155434 CATEGORY AV, DENISON HF-0,
CATEGORY AV. HF-1, HF-2, AFNOR 48-603 CATEGORY HV. HF-1, HF-2, AFNOR 48-603 CATEGORY HV.

Description Pack Size Part Number


Description Pack Size Part Number JCB Hydraulic Fluid OP 46 1 Gallon/3.7L 4002/2001U Description Pack Size Part Number
JCB Hydraulic Fluid UP 32 5 Gallon/18.9L 4002/2805U JCB Hydraulic Fluid OP 46 5 Gallon/18.9L 4002/2005U JCB Hydraulic Fluid OP 68 5 Gallon/18.9L 4002/2705U

JCB LUBRICANTS NO COMPROMISE 5


HYDRAULIC FLUID.

JCB HYDRAULIC FLUID HP 15 JCB HYDRAULIC FLUID HP 32 JCB HYDRAULIC FLUID HP 46


A premium, shear stable anti-wear ISO A high quality hydraulic fluid, combining A top quality hydraulic fluid combining
15 mineral hydraulic fluid, formulated for anti-wear performance with excellent anti-wear performance with excellent
good flow characteristics at low ambient filterability in both wet and dry conditions. filterability in both wet and dry conditions.
temperatures. Specially formulated from solvent refined Specially formulated from solvent refined
base oil, containing a superior additive base oil, containing a superior additive
package, which not only provides outstanding package, which not only provides outstanding
performance but also reduces pump, motor performance but also reduces pump, motor
JCB STANDARD: JCB STANDARD: and valve wear. JCB Hydraulic Fluid HP 32 JCB STANDARD: and valve wear. JCB Hydraulic Fluid HP 46
4002/0500 4002/1000 provides excellent protection against corrosion 4002/0800 provides excellent protection against corrosion
and metal fatigue, combined with superb and metal fatigue, combined with superb
filterability characteristics ensuring quality filterability characteristics ensuring quality
throughout service life. throughout service life.

BENEFITS BENEFITS BENEFITS


• Wide application temperature range (through outstanding low and high • Lasts throughout its prescribed service life (due to high thermal and oxidation • Lasts throughout its prescribed service life (due to high thermal and oxidation
temperature viscosity characteristics). stability for high temperature applications). stability for high temperature applications).
• Trouble-free operation due to the unique combination of outstanding • Trouble-free operation due to the unique combination of outstanding • Suitable for use in both JCB and non-JCB machines.
demulsibility, foam, air release, hydrolytic stability and filterability. demulsibility, foam, air release, hydrolytic stability and filterability • Trouble-free operation due to the unique combination of outstanding
• Long term stable fluid viscosity through excellent shear stability characteristics. demulsibility, foam, air release, hydrolytic stability and filterability
characteristics of the selected viscosity index improver. • Can also be applied in other industrial equipment such as screw-air characteristics.
• JCB HP 15 Hydraulic fluid meets the requirements of most off highway compressors and lightly loaded gears. • Can also be applied in other industrial equipment such as screw-air
equipment manufacturers. compressors and lightly loaded gears.

PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION


DIN 51524 PART 3 CATEGORY HVLP. DIN 51524-2: HLP, ISO 6743-4: HM. DIN 51524-2: HLP, ISO 6743-4: HM.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS

ISO 6743-4, HV, DENISON HF-0, BOSCH REXROTH, VICKERS, DENISON HF-1, HF-2, HF-0, VICKERS I 286-S, M 2950-S, DENISON HF-1, HF-2, HF-0, VICKERS I 286-S, M 2950-S,
US STEEL, CINCINNATI MILACRON. CINCINNATI MACHINE P68, P69, P70 US STEEL 127, 136, CINCINNATI MACHINE P68, P69, P70, US STEEL 127, 136,
BOSCH REXROTH, SAUER DANFOSS. BOSCH REXROTH, SAUER DANFOSS.

Description Pack Size Part Number


JCB Hydraulic Fluid HP 46 1 Gallon/3.7L 4002/0801U
Description Pack Size Part Number Description Pack Size Part Number JCB Hydraulic Fluid HP 46 5 Gallon/18.9L 4002/0805U
JCB Hydraulic Fluid HP 15 1 Gallon/3.7L 4002/0503U JCB Hydraulic Fluid HP 32 5 Gallon/18.9L 4002/1025U JCB Hydraulic Fluid HP 46 55 Gallon/208L 4002/0803U

6 JCB LUBRICANTS NO COMPROMISE


HYDRAULIC FLUID

JCB HYDRAULIC FLUID HP 68


A top quality anti-wear hydraulic oil,
specially designed to meet the stringent
filterability requirements of modern tools
and electro-hydraulic systems,for use in
machines where accurate indexing,
positioning and sequencing depends
on oil quality. Manufactured from the
JCB STANDARD: highest quality solvent refined base stocks
4002/0700 and special additives. It is fully inhibited to
keep systems free of corrosion and sludging
and is highly resistant to foaming.

BENEFITS
• Lasts throughout its prescribed service life (due to high thermal and oxidation
stability for high temperature applications).
• Suitable for use in JCB and many non-JCB machines.
• Trouble-free operation due to the unique combination of outstanding
demulsibility, foam, air release, hydrolytic stability and filterability characteristics.
• Can also be applied in other industrial equipment such as screw-air
compressors and lightly loaded gears.

PERFORMANCE CLASSIFICATION
DIN 51524-2: HLP, ISO 6743-4: HM.

MANUFACTURERS’ STANDARDS

DENISON HF-1, HF-2, HF-0, VICKERS I 286-S, M 2950-S,


CINCINNATI MACHINE P68, P69, P70, US STEEL 127, 136,
BOSCH REXROTH, SAUER DANFOSS.

Description Pack Size Part Number


JCB Hydraulic Fluid HP 68 5 Gallon/18.9L 4002/0705U
JCB Hydraulic Fluid HP 68 55 Gallon/208L 4002/0701U

JCB LUBRICANTS NO COMPROMISE 7


ENGINE OIL.

YOU CAN BE SURE OF Engine oil testing


JCB engine oils undergo a rigorous program of testing to ensure that
JCB ENGINE OIL UP 15W40
JCB UP 15W40 is aimed at Tier 4i and T4
THE PERFORMANCE AND they provide the maximum performance and protection for your JCB Final Diesel engines that utilize DOC (Diesel
Oxidation Catalyst), DPF (Diesel Particulate
CONFIDENT OF THE machine and its engine. Filter) and SCR (Selective Catalytic Reduction)
aftertreatment technology to meet emissions
PROTECTION OFFERED BY The DK Oxidation Test is a typical example of how JCB engine oils
outperform other engine oils that claim to be the same.
legislation. JCB UP 15W40 is an Ultra High
Performance Diesel Engine Lubricant

JCB ENGINE OILS. THE JCB STANDARD:


4001/2900
designed for the lubrication of the latest
high performance USA EPA and EURO diesel

HIGH QUALITY BASE OILS DK Oxidation test: engines, in particular where these engines
are equipped with after treatment systems

AND CAREFULLY SELECTED JCB Engine oil is blended to ensure that the oil continues to provide
efficient lubrication throughout its designated service interval life.
(such as DOC, DPF & SCR) operating on low
sulphur diesel fuel (50 ppm or below) and

ADDITIVES ENSURE JCB Some poor quality, low cost oils begin to breakdown leading to
under severe heavy duty conditions.

ENGINE OILS MEET OR excessive deposits which cause reduced lubrication and subsequently
increased wear.
EXCEED ALL INTERNATIONAL The DK Oxidation test is an industry standard test and shows how
SPECIFICATIONS. oxidation can form within engine oil. The image below is after 192 BENEFITS
hours and shows excessive deposits forming with poor quality low • A Tier 4i and Tier 4F engine oil.
• Specially developed formulation for ACEA E9 and API CJ-4 applications.
cost engine oil, while there are no deposits from the JCB oil. • Minimizes diesel particulate filter (DPF/CRT) plugging.
• Protects catalytic after treatment systems (SCR).
• Excellent protection against borepolishing and cam wear.
• Provides quick lubrication after cold starting thus limiting engine wear.
• Prevents engine fouling due to combustion soot.

PERFORMANCE CLASSIFICATION
API CJ-4/CI-4 PLUS/CI-4, ACEA E9.

MANUFACTURERS’ STANDARDS

CAT ECF-2/ECF-3, JASO DH-2, CUMMINS CES 20081, DEUTZ DQC III-10
LA, DETROIT DIESEL 93K218, MACK EO-O PREMIUM PLUS,
MAN M 3275-1/3575, MB 228.31, MTU DDC TYPE 2.1, RENAULT RLD-3,
VOLVO VDS-4, ALLISON C-4.

Choosing anything other than the recommended JCB oil


is a false economy which can lead to inefficient machine
operation, component wear and ultimately premature In this test the JCB product clearly outperformed both the Description Pack Size Part Number
component failure. low cost alternative and the industry standard requirement. JCB Engine Oil UP 15W40 5 Gallon/18.9L 4001/2905U

8 JCB LUBRICANTS NO COMPROMISE


ENGINE OIL

JCB ENGINE OIL UP 5W40 JCB ENGINE OIL UP 5W30 JCB ENGINE OIL UP 10W30
A full synthetic oil that is designed to protect JCB UP 5W30 is a ultra high performance JCB Engine Oil UP 10W-30 is an Ultra High
your engine against the harshest of environ- synthetic heavy duty engine oil with low Performance Diesel Engine Lubricant with
ments. The full synthetic base fluid combined sulphated ash, phosphorus and sulphur content Medium Sulphated Ash, Phosphorus and
with a unique additive system also delivers (low SAPS) designed for lubrication of T4i, T4F, Sulphur content (Mid SAPS) designed for the
low viscosity fuel savings performance with Euro IV, Euro V and Euro VI diesel engines lubrication of the latest USA EPA 2007 and
no compromise in durability. Ideal for Tier 4 giving excellent cold starting properties and EURO 5, T4i, T4F diesel engines. It is a low
and Tier 4 F exhaust emission regulations. fuel economy benefits.This product is ideal for viscosity SAE 10W-30 grade which offers fuel
JCB STANDARD: JCB STANDARD: all Euro IV, Euro V and Euro VI diesel engines JCB STANDARD: economy improvement.
4001/3400 4001/3100 equipped with a diesel particulate filter (DPF) 4001/3000
or catalytic after treatment systems (such as
SCR) operating on low sulphur diesel fuel (50
ppm or below) and under severe heavy duty
conditions. In addition it possesses excellent
cold starting properties.

BENEFITS BENEFITS BENEFITS


• Protects exhaust gas treatment systems. • A Tier 4i and Tier 4F engine oil. • A Tier 4i and Tier 4F engine oil.
• Excellent wear protection, even under constant full load. • Product specially developed to cover ACEA E6, ACEA E7 and ACEA E9 applications. • Specially developed formulation for ACEA E9 and API CJ-4 applications.
• Durable protection against aggressive acids and corrosion during the whole • Low Viscosity SAE 5W-30 grade saves fuel consumption during • Minimises diesel particulate filter (DPF/CRT) plugging.
oil drain interval. warming-up phase and operating conditions. • Protects catalytic after treatment systems (SCR).
• Reduced contaminant emissions. • Minimises diesel particulate filter (DPF/CRT) plugging. • Excellent protection against bore polishing and cam wear.
• Outstanding soot handling. • Protects catalytic after treatment systems (SCR). • Provides quick lubrication after cold starting thus limiting engine wear.
• Beneficial for older diesel engines independently of the emission level. • Excellent cold starting properties due to low pour point. • Prevents engine fouling due to combustion soot.
• Excellent protection against bore polishing and cam wear.
• Provides quick lubrication after cold starting thus limiting engine wear.
• Prevents engine fouling due to combustion soot.
PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION
API CJ-4, ACEA E9/E7. API CJ-4, ACEA E9,E7,E6,E4. API CJ-4/SN, ACEA E9.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS



CAT ECF-2/ECF-3, CUMMINS CES 20081, DETROIT DIESEL 93K214, CAT ECF-3, CUMMINS CES 20081, DEUTZ DQC IV-10 LA, CAT ECF1-a/ECF-2/ECF-3, CUMMINS CES 20081, DEUTZ DQC III-10 LA,
93K215, 93K218, DEUTZ DQC ll-10 LA, FAWDE Q/XC 3135-2007, DETROIT DIESEL 93K218, IVECO 18-1804 CLASSE TLS E6, MACK EO-O PREMIUM PLUS, MAN M 3575, MTU DDC TYPE 2.1,
MACK EO-O PREMIUM PLUS, MAN M 3575, MB 228.31, MACK EO-O PREMIUM PLUS, MAN M 3271-1, MAN M 3477, MB 228.31, RENAULT RLD-3, VOLVO VDS-4.
RENAULT RLD-3, VOLVO VDS-4. MAN M 3575, MAN M 3677, MB 228.31, MB 228.51, MTU DDC TYPE 2.1,
MTU DDC TYPE 3.1, RENAULT RLD-3, SCANIA LA , VOLVO VDS-4.
Description Pack Size Part Number
JCB Engine Oil UP 5W40 1 Gallon/3.7L 4001/3401U
JCB Engine Oil UP 5W40 5 Gallon/18.9L 4001/3405U Description Pack Size Part Number Description Pack Size Part Number
JCB Engine Oil UP 5W40 55 Gallon/208L 4001/3403U JCB Engine Oil UP 5W30 5 Gallon/18.9L 4001/3105U JCB Engine Oil UP10W30 5 Gallon/18.9L 4001/3005U

JCB LUBRICANTS NO COMPROMISE 9


ENGINE OIL.

JCB ENGINE OIL EP 15W40 JCB ENGINE OIL HP 10W30 JCB ENGINE OIL HP 20W50
An advanced, high specification engine oil, JCB HP 10W30 is a universal mixed fleet JCB HP 20W50 is a universal mixed fleet
suitable for use in on and off highway and in engine lubricant and is used in high engine lubricant and is used in high perfor-
commercial vehicle applications, including performance four stroke diesel engines, mance four stroke diesel engines, normally
those meeting Tier 2 and Tier 3 exhaust naturally aspirated as well as turbocharged aspirated as well as turbocharged or
emission regulations. Its outstanding or supercharged, operating under moderate supercharged, operating under moderate
protection for naturally aspirated, to heavy duty conditions. JCB HP 10W30 to heavy duty conditions. JCB HP 20W50
turbocharged and supercharged engines is used as an engine lubricant in off highway/ is used as engine lubricant in off highway/
JCB STANDARD: makes it the ideal choice for both single JCB STANDARD: construction applications, commercial JCB STANDARD: construction applications, commercial
4001/1800 and mixed fleet operations. 4001/1700 vehicles, buses or military equipment. 4001/1900 vehicles, buses or military equipment, when
one or more of the following specifications
below are used to describe the required
lubricant quality.

BENEFITS BENEFITS BENEFITS


• An excellent value for money multi-purpose engine oil. • An excellent value for money multi-purpose engine oil. • An excellent value for money multi-purpose engine oil.
• Excellent protection against bore polishing and cam wear. • Ideal universal mixed fleet engine lubricant. • Ideal universal mixed fleet engine lubricant.
• Protects engine against corrosive wear in off-the-road applications. • Universal engine/transmission lubricant for buses and off-highway or • Universal engine/transmission lubricants for buses and off-highway
• Provides quick lubrication after cold starting thus limiting engine wear. military equipment. or military equipment.
• Prevents engine fouling due to combustion soot (problematic to EGR). • Reduces handling and storage costs (one oil for many applications). • Reduces handling and storage costs (one oil for many applications).
• Helps protect against cam wear. • Helps protect against cam wear.
• Provides superior lubrication after cold starting thus limiting engine wear. • Provides good lubrication after cold starting thus limiting engine wear.
• Prohibits corrosion and helps protect against rust. • Prohibits corrosion and protects against rust.

PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION


API CH-4/SJ, ACEA E7. API CH-4/CG-4/SJ/CF, ACEA A2, B2, E2. API CH-4/SJ, ACEA A2, B3, E3.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS



CAT ECF-1-a, CUMMINS 20076/7, DEUTZ DQC II-10, MACK EO-N, MACK EO-L PLUS, CUMMINS CES 20076, CAT ECF-1. CUMMINS CES 20071/72, MACK EO-M Plus, MAN 3275,
MAN M 3275-1, MB 228.3, MTU DDC TYPE-2, RENAULT RLD/RLD-2, SCANIA LONG DRAIN, VOLVO VDS2, CCMC D5, D4, PD2.
VOLVO VDS-3.

Description Pack Size Part Number


JCB Engine Oil EP 15W40 1 Gallon/3.7L 4001/1801U Description Pack Size Part Number
JCB Engine Oil EP 15W40 5 Gallon/18.9L 4001/1805U Description Pack Size Part Number JCB Engine Oil HP 20W50 5 Gallon/18.9L 4001/1905U
JCB Engine Oil EP 15W40 55 Gallon/208L 4001/1803U JCB Engine Oil HP10W30 5 Gallon/18.9L 4001/1705U JCB Engine Oil HP 20W50 55 Gallon/208L 4001/1903U

10 JCB LUBRICANTS NO COMPROMISE


ENGINE OIL

JCB UNIVERSAL AGRICULTURAL OIL


A truly multipurpose oil which is suitable for
naturally aspirated, turbocharged engines,
transmissions (including wet brake systems)
and hydraulics. JCB Universal Agricultural Oil
can also be used in power steering and power
take-offs where an engine oil is specified.
This SAE 10W30 viscosity product has good
JCB STANDARD: fluidity, ensuring easy starting and rapid
4004/0300 hydraulic response even in the most
severe weather conditions.

BENEFITS
• Truly universal application oil.
• Suitable for engines, transmissions and hydraulic systems.
• Excellent fluidity, ensuring easy starting and rapid hydraulic response.
• Rationalization reduces storage and handling costs and eliminates risk of
incorrect application.
• Excellent wear rate protection extends engine and component life.
• Can be used for power steering and PTOs where an engine oil is specified.

PERFORMANCE CLASSIFICATION
API CG-4, API GL-4, DIN 51524-3 : HVLP (-D), ACEA E3.

MANUFACTURERS’ STANDARDS

DEUTZ DQC I-02, ZF TE-ML 06A, 06B, 06C, 06F, 07B, AFNOR NFE
48603 HV, ALLISON C-4, CASE MS 1207, 1209, 1210, 1230, CNH MAT
3505, 3509, 3525, 3526, FORD M2C48-C3, M2C86-B, M2C134-D,
M2C159-B/C, JOHN DEERE JDM J20C, NEW HOLLAND 82009201/2/3,
NH 410B, 420A, MASSEY FERGUSON CMS M 1145, 1144, 1143, 1139, 1135,
SAE J306: SAE 75W-80.

Description Pack Size Part Number


JCB Universal Agricultural Oil 5 Gallon/18.9L 4004/0305U

JCB LUBRICANTS NO COMPROMISE 11


GEAR OIL.

GENUINE JCB GEAR OILS Gear and Transmission oil testing


JCB gear and transmission oils undergo a rigorous program of testing
OFFER IMPROVED to ensure that they provide the maximum performance and protection

PERFORMANCE AND for your JCB machine and its gear and transmission systems.

HIGH LEVELS OF WEAR JCB Engineering standards lay down performance levels and criteria

PROTECTION. THEY ARE for JCB Gear and Transmission oil which EXCEED OIL INDUSTRY
STANDARDS. The Copper Strip Test is just an example of how JCB
SUITABLE FOR A WIDE Gear and Transmission oils outperform other gear and transmission

RANGE OF APPLICATIONS.
fluids that claim to be the same.

Copper strip test:


This is a test to evaluate how an oil will corrode copper containing
materials.

Minimizing corrosion is key to preventing premature wear and tear


or even failure of gears and transmissions.

As you can see from the discoloring on the copper strip below,
poor quality low cost oils will corrode copper components far
quicker than JCB oils.

Choosing anything other than the recommended JCB oil


is a false economy which can lead to inefficient machine
operation, component wear and ultimately premature In this test the JCB product clearly outperformed the low
component failure. cost alternative.

12 JCB LUBRICANTS NO COMPROMISE


GEAR OIL

JCB GEAR OIL EP 85W140 JCB GEAR OIL HP LS PLUS JCB GEAR OIL HP
A heavy duty multigrade gear lubricant, An SAE 80W90 multipurpose limited slip gear A highly refined paraffinic mineral oil,
suitable for use in gearboxes and final drives, oil designed for use in hypoid gears, axles containing extreme pressure additives and
where special anti-wear protection is required. and final drives. It is especially suited for those friction modifiers, suitable for a wide range
The high quality additive package and base oils with wet brake plates and limited slip (LS) of applications including axles, oil-immersed
protect against rust and corrosion, helping differentials. This oil also offers reduced brakes, clutches, transmissions and hydraulics.
to extend component life. Particularly suited ‘Brake Chatter’ and improved mechanical
for hypoid and spiral bevel type gears in transmission component life along with
JCB STANDARD: commercial vehicles and off-highway JCB STANDARD: excellent extreme pressure protection. JCB STANDARD:
4000/0600 equipment. 4000/3900 JCB Gear Oil LS Plus can be used for both 4000/0500
on and off-highway equipment.

BENEFITS BENEFITS BENEFITS


• Protects against rust and corrosion. • GL-5 gear oil performance in combination with wet brake and limited slip • Provides excellent drive-line lubrication.
• Very shear stable formulation. differential capabilities offering excellent wear protection. • Optimal friction characteristics for wet brakes.
• Proven oxidation stability. • Excellent dynamic braking performance for smooth and safe brake operation. • Avoids IPTO clutch slippage and reduces wet brake noise.
• Compatible with seal materials. • Significant reduction in brake chatter improving mechanical transmission • Excellent viscosity stability between services.
• Extends drive-train component life. component life. • Provides good transmission lubrication.
• Good protection against wear and scoring even under heavy duty and shock • Excellent extreme pressure protection. • Prevents equipment component corrosion.
loading conditions. • Can be used in LSD applications. • Contains effective anti-foam agent.
• High resistance to thermal and chemical degradation. • Compatible with seal materials.

PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION



API GL-4/GL-5. API GL-5. API GL-4, SAE J300: 10W-30.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS



ZF TE-ML 05A, 12E, 16D, 21A, MIL-L-2105 D. ZF TE-ML 05C, 12C, 16E, 21C, MIL-L-2105 D, FORD M2C104-A, ZF TE-ML 03E, 05F, 06K, 17E, 21F, AGCO Powerfluid 821 XL,
JOHN DEERE JDM J 11 F, LIEBHERR, NH 520 B, VOLVO 97310. AGCO Q-186 (Whitefarm), ALLISON C-4, CASE MS 1230, 1210, 1209,
1207, 1206, CLAAS / LANDINI / SAME-Transmission, CNH MAT 3505,
3506, 3509, 3525, 3526, 3540, FNHA-2-C-200.00 / -201.00, FORD
M2C48-C3, ESN M2C86-B/C, M2C134-D, JOHN DEERE JDM J20C,
MASSEY FERGUSON CMS M 1145, 1143, 1141,1135, NH 410 B, SAE J306:
75W-80, SDFG OT 1891 A, VALTRA G02-08.

Description Pack Size Part Number Description Pack Size Part Number Description Pack Size Part Number
JCB Gear Oil EP 85W140 5 Gallon/18.9L 4000/0605U JCB Gear Oil HP LS Plus 5 Gallon/18.9L 4000/3905U JCB Gear Oil HP 5 Gallon/18.9L 4000/0505U

JCB LUBRICANTS NO COMPROMISE 13


GEAR OIL.

JCB GEAR OIL HP PLUS JCB GEAR OIL HP 90 JCB GEAR OIL OP 75W140
A high performance gear oil specifically A heavy duty multipurpose gear oil, formulat- JCB Optimum Performance Gear Oil
developed for the JCB axle and transmission, ed for gear type transmissions, spiral bevelled 75W140 is a synthetic automotive gear
no other product will provide the chatter and hypoid drive axles, operating within a lubricant. JCB Optimum Performance Gear
control and brake performance in the JCB very wide oil temperature range and worm Oil 75W140 is recommended for heavy duty
manufactured powertrain that JCB Gear Oil gear final drives. It contains extreme pressure drive-line components such as rear-axles,
plus will. Its unique enhanced viscosity stability additives to give high level wear protection final drives and selected manual transmissions,
provides consistent protection throughout its under high speed, high torque and shock requiring special low temperature fluidity to
JCB STANDARD: prescribed service interval. Its unique JCB JCB STANDARD: loading conditions. JCB STANDARD: reduce fuel consumption or facilitate gear
4000/2200 formulation offers outstanding squawk and 4000/0300 4000/4800 shifting.
chatter control in oil immersed brake systems.

BENEFITS BENEFITS BENEFITS


• JCB Gear Oil HP Plus has been designed and developed specifically to • Helps extend drive-train component life. • Provides excellent low temperature fluidity.
provide optimum performance of the wet brake mechanism incorporated • Good protection against wear and scoring even under heavy duty and • Facilitates gear shifting at low temperatures.
into the axle/transmission systems manufactured by JCB. shock loading conditions. • Reduces drive-line operating temperatures.
• Provides excellent chatter control, preventing brake noise in JCB axles. • High resistance to thermal and chemical degradation during use. • Reduces internal friction.
• Maintains braking efficiency in wet brake systems, with reduction in noise • Protects against rust and corrosion. • Provides good wear protection under heavy duty condition.
and friction plate wear. • Very shear stable formulation. • Extends drive-line component life.
• Extends equipment life by protecting against rust and corrosion. • Proven oxidation stability. • Prohibits corrosion.
• Contains rust and corrosion inhibitors. • Compatible with seal materials. • Protects against rust.
• Contains a very effective anti-foam agent.
• Compatible with all conventional seal materials.
PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION

JCB STANDARD 4000/2200. API GL-5. API GL-4, GL-5.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS

JCB STANDARD 4000/2200 UNIQUE TO JCB. MAN 342 Type M1, MB 235.0, ZF TE-ML 07, 08, 16C, 17B, 19B, 21A, MIL-PRF-2105-E, MB 235.8, Scania STO 1:0, ZF TE-ML 02B, ZF TE-ML 05B
FORD M2C9102-A, JOHN DEERE JDM JIIE, VOLVO 97310. ZF TE-ML 12B, MAN 3343 Typ S, MAN 341 Typ E3.

Description Pack Size Part Number Description Pack Size Part Number
JCB Gear Oil HP Plus 1 Gallon/3.7L 4000/2202U JCB Gear Oil HP 90 1 Gallon/3.7L 4000/0301U
JCB Gear Oil HP Plus 5 Gallon/18.9L 4000/2205U JCB Gear Oil HP 90 5 Gallon/18.9L 4000/0305U Description Pack Size Part Number
JCB Gear Oil HP Plus 55 Gallon/208L 4000/2203U JCB Gear Oil HP 90 55 Gallon/208L 4000/0303U JCB Gear Oil OP 75W140 5 L/1.3 Gallon 4000/4801U

14 JCB LUBRICANTS NO COMPROMISE


GEAR OIL

JCB LUBRICANTS NO COMPROMISE 15


TRANSMISSION FLUIDS.

GENUINE JCB HIGH QUALITY Gear and Transmission oil testing


JCB gear and transmission oils undergo a rigorous program of testing
JCB TRANSMISSION FLUID OP
A high quality transmission fluid uniquely
TRANSMISSION FLUIDS to ensure that they provide the maximum performance and protection designed for use on JCB Fastrac machines
fitted with V-Tronic transmissions. Its universal
PROVIDE A HIGH LEVEL OF for your JCB machine and its gear and transmission systems. properties make it suitable for use in engines,
wet brake systems, final drives and hydraulic
WEAR PROTECTION AND JCB Engineering standards lay down performance levels and criteria systems.

ARE SUITABLE FOR A WIDE


for JCB Gear and Transmission oil. Below is just an example of how
JCB STANDARD:
wear and tear caused by poor quality oil can manifest itself. 4004/6300
RANGE OF APPLICATIONS.

BENEFITS
• Suitable for diesel and gasoline engines fitted in tractors and off-highway/
construction equipment.
• Avoids IPTO (independent power take off) clutch slippage.
• Limits wet brake noise, thus maintains brake capacity while limiting friction
plate wear.
• Provides good transmission lubrication.
• Helps prevent equipment component rust and corrosion.
• Low viscosity grade will provide quick response.

In tests the JCB product clearly outperformed the lower


cost alternatives. PERFORMANCE CLASSIFICATION
API CF-4, API GL-4.
Choosing anything other than the recommended JCB oil
is a false economy which can lead to inefficient machine
MANUFACTURERS’ STANDARDS
operation, component wear and ultimately premature
component failure. FENDT KDM 17/2012, ACEA E2, CNH MAT 3525, 3526, DIN 51524 : HLP
(-D), FNHA 200.00, 201.00, FORD M2C134-D, M2C159-B/C,
JOHN DEERE JDM J20C, MASSEY FERGUSON CMS M 1145, 1144, 1143,
1139, 1135, NEW HOLLAND 82009201/2/3, NH 420A, SDFG OU 1391,
OT 1891, STEYR D-401,ZF TE-ML 06A, 06B, 06C, 07B.

Description Pack Size Part Number


JCB Transmission Fluid OP 5 Gallon/18.9L 4004/6305U

16 JCB LUBRICANTS NO COMPROMISE


TRANSMISSION FLUIDS

JCB TRANSMISSION FLUID EP 10W JCB TRANSMISSION FLUID EP SAE 30


A high quality transmission lubricant A high quality transmission lubricant
recommended for off-highway, construction recommended for off-highway, construction
and agricultural equipment. Its primary use and agricultural equipment. Its primary use
is in powershift transmissions, final drives, is in powershift transmissions, final drives,
hydrostatic transmissions, torque converters hydrostatic transmissions, torque converters
and hydraulic systems. and hydraulic systems.

JCB STANDARD: JCB STANDARD:


4000/2500 4000/2600

BENEFITS BENEFITS
• An excellent multi-purpose transmission fluid. • An excellent multi-purpose transmission fluid.
• Optimal friction characteristics, even at low temperatures. • Optimal friction characteristics even at low temperatures.
• Provides good wear protection under heavy duty conditions. • Provides good wear protection also under heavy duty conditions.
• Gear protection, even under shock load conditions. • Gear protection, even under shock load conditions.
• Helps maximize drive line component life. • Designed to extend drive line component life.
• Protects against rust and prevents corrosion. • Protects against rust and prevents corrosion.
• Provides good transmission lubrication. • Provides good transmission lubrication.

PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION


API GL-4. API GL-4.

MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS



CAT TO-4, KOMATSU KES 07.868.1, ALLISON C-4, ALLISON TES-439, CAT TO-4, KOMATSU KES 07.868.1, ZF TE-ML 03C, 07F, ALLISON C-4,
DANA, EATON. ALLISON TES-439, DANA, EATON.

Description Pack Size Part Number Description Pack Size Part Number
JCB Transmission Fluid EP 10W 1 Gallon/3.7L 4000/2501U JCB Transmission Fluid EP SAE 30 1 Gallon/3.7L 4000/2601U
JCB Transmission Fluid EP 10W 5 Gallon/18.9L 4000/2505U JCB Transmission Fluid EP SAE 30 5 Gallon/18.9L 4000/2605U
JCB Transmission Fluid EP 10W 55 Gallon/208L 4000/2503U JCB Transmission Fluid EP SAE 30 55 Gallon/208L 4000/2603U

JCB LUBRICANTS NO COMPROMISE 17


TRANSMISSION FLUIDS.

JCB CLUTCH FLUID OP JCB UNIVERSAL ATF HP


A highly specialized fluid designed for use in A versatile product recommended for
JCB Fastrac V-Tronic clutch systems. This automatic transmissions and power steering
fluid is also suitable for power steering, rear systems, where Dexron IIE and III approved
axle steering, level control, hydro-pneumatic products are acceptable. It is suitable for a
suspension, shock absorbers, stability and variety of applications including trucks and
traction systems (ABS/ASR/ASC) and central off-highway equipment.
locking systems. It can also perform in
JCB STANDARD: many specialist applications, such as JCB STANDARD:
4002/1900 electro-hydraulic cabriolet actuation 4000/2300
systems.

BENEFITS BENEFITS
• Designed for use in JCB Fastrac applications. • Transmission life protected.
• A fully synthetic, optimum performance fluid. • Immediate circulation in cold weather.
• Designed to provide maximum performance throughout the service • Trouble free operation with smooth gear changing.
interval. • Permits rationalization, reducing product storage and handling costs
• Guaranteed performance at extreme temperatures. and eliminates wrong ATF choice.
• Provides smooth power-steering

PERFORMANCE CLASSIFICATION PERFORMANCE CLASSIFICATION


DIN 51 524 T3, ISO 7308. DEXRON III.


MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS

Audi / VW TL 52 146.00, Ford WSS-M2C204-A, MAN M 3289, ALLISON C-4, ALLISON TES 389, DEXRON III (H), MAN 339 TYPE V1,
MB 345.0, ZF TE-ML 02K, ISO 7308. MAN 339 TYPE Z1, MB 236.1, MB 236.9, VOITH 55.6335.xx,
VOLVO 97341, CAT TO-2, FORD MERCON, ZF TE-ML 02F, 04D,
03D, 09, 11B, 14A, 17C.

Description Pack Size Part Number Description Pack Size Part Number
JCB Clutch Fluid OP 6x 1L 4002/1904U JCB Universal ATF HP 5 Gallon/18.9L 4000/2305U

18 JCB LUBRICANTS NO COMPROMISE


ANCILLARY PRODUCTS

ANCILLARY PRODUCTS.

JCB HIGH PERFORMANCE JCB ANTIFREEZE JCB 50:50 ANTIFREEZE


ANTI-SQUAWK FLUID AND ENGINE COOLANT AND ENGINE COOLANT
A performance supplement for gear oils An ethylene glycol based engine coolant JCB 50:50 antifreeze and engine coolant
designed to suppress brake shudder and concentrate, tested and proven in heavy is an ethylene glycol based solution which
squawk. duty applications, using established inhibitor combines superior antifreeze and coolant
technology. The sophisticated silicate technology with de-mineralised water to
stabilisation technology eliminates the provide a quick, easy and efficient solution
formulation of silica gel, whilst other additives to your antifreeze and coolant requirements.
ensure excellent compatibility with hard water, Ideal in helping prevent the build up of scale
preventing the build-up of scale. Antifreeze and where the quality of water supply cannot be
JCB STANDARD: JCB STANDARD: coolant used in JCB T2 and T3 machines must JCB STANDARD: guaranteed.
4004/3900 4006/1100 conform to ASTM D6210 standard. 4006/1100

BENEFITS BENEFITS BENEFITS

• Fully approved for use on JCB machines. • Manufactured to off highway standard ASTM D6210. • Manufactured to off highway standard ASTM D6210.
• Specially developed for machines fitted with oil immersed brakes. • Maximises engine performance. • Maximises engine performance.
• Superior freeze protect to -37°C/-34°F (at 50% dilution). • Superior freeze protect to -37°C /-34°F.
• Guaranteed to be compatible with your JCB radiator and cooling pack. • Guaranteed to be compatible with your JCB radiator and cooling pack.
Description Pack Size Part Number
JCB High Performance Anti-Squawk Fluid 4x 1L/1Qt 4004/3904U
MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS

ASTM D6210. ASTM D6210.

Description Pack Size Part Number Description Pack Size Part Number
JCB Antifreeze And Engine Coolant 1 Gallon/3.7L 4006/1101U JCB 50:50 Antifreeze And Engine Coolant 1 Gallon/3.7L 4006/1110U
JCB HYDRAULIC
ANTI-STICK ADDITIVE
JCB Anti Stick Additive is specially designed
WAXOYL
to relieve the ‘stick slip’ phenomena that can
occur with most hydraulic systems. Its friction Recommended for use on telescopic booms and extending dippers, this highly effective rustproofer is suitable
modifier properties are designed to aid the for all plant and machinery. Waxoyl expels moisture and forms a self healing skin to prevent rust formation.
flow characteristics of the hydraulic system
and help relieve the hydraulic cylinder noise
that often accompanies ‘stick slip’. It is
designed for hydraulic systems only and BENEFITS
JCB STANDARD: should NOT be used in common hydraulic,
4004/6700 brake and transmission systems. • Excellent rust killer.
JCB STANDARD: • Years of protection.
4004/0500 • Can be used to protect electrical systems from damp.

Description Pack Size Part Number


Description Pack Size Part Number Waxoyl 1.3 Gallon/5L 4004/0502
JCB Hydraulic Anti-Stick Additive 4x 1L/1 Qt 4004/6704U Waxoyl 6x400ml (Aerosol) 4004/0501A

JCB LUBRICANTS NO COMPROMISE 19


GREASE.

JCB GREASES PROVIDE LONG Grease testing


JCB grease undergoes a rigorous program of testing to ensure it
JCB SPECIAL HP GREASE

LIFE PROTECTION TO HARD


JCB Special HP Grease is a premium quality, extreme pressure grease,
provides the maximum performance and protection for your JCB recommended for use in arduous operating conditions, such as high
temperatures, excessive loading and extensive exposure to water. The
WORKING MACHINERY UNDER machine. JCB Engineering standards lay down performance levels and
criteria for JCB grease which EXCEED INDUSTRY STANDARDS.
sophisticated additive package combines with excellent adhesive properties
to give high performance protection to hard working automotive, industrial,
EXTREME CONDITIONS. THE The Four Ball Weld Test is a typical example of how JCB Grease agricultural and earthmoving equipment, all year round.

COMPREHENSIVE RANGE outperforms other grease that claim to be the same. JCB STANDARD:
COLOR:
4003/2000
BLUE
OPTIMIZES MAINTENANCE Four ball weld test: SOAP TYPE:
NLGI:
LITHIUM COMPLEX
2
SCHEDULES HELPING TO
For this industry standard test grease is put under rotating speed
DROP POINT (IP132): 473°F/245°C
and then a 450KG/992lb load is applied. To pass the test the ball
WORKING TEMPERATURE RANGE: -4°F TO 300°F/-20°C TO 150°C
REDUCE COSTS IN ALL bearings have to last for 15 seconds before they ‘fail’ (seize) and weld FOUR BALL WELD: 992LB/450KG

APPLICATIONS.
together. You can see below that the non JCB ‘equivalent’ grease
Description Pack Size Part Number
fails immediately while the JCB HP Grease continues well past JCB Special HP Grease 24x400g/14oz 4003/2017
the required time. JCB grease is manufactured to provide significant JCB Special HP Grease 12.5Kg/27.5lb 4003/2006
load protection for your JCB and other off-highway machinery. JCB Special HP Grease 18Kg/39.7lb 4003/2009
JCB Special HP Grease 50Kg/110lb 4003/2005

GREASE GUN
• Designed to suit 400gm/14oz grease cartridges.

Description Part Number


Grease Gun - Standard Grip (5 per pack) 992/11300

In tests the JCB product clearly outperformed the lower


cost alternatives.

Choosing anything else but the recommended JCB grease


is a false economy which can lead to inefficient machine
operation, component wear and ultimately premature
component failure.

20 JCB LUBRICANTS NO COMPROMISE


GREASE

JCB EXTREME PERFORMANCE MOLY GREASE JCB SPECIAL SLIDE GREASE JCB AUTOGREASE
JCB Extreme Performance Moly Grease is an advanced performance, JCB Special Slide Grease is formulated to provide excellent protection under JCB AUTOGREASE is for use with the JCB AUTOGREASE system, used on
multipurpose grease, recommended for heavily loaded bearing surfaces and heavy load and extreme pressure, where water and dirt are prevalent. It JCB’s large breaker range. This mineral oil based paste, containing an aluminium
in particular where limited or oscillating motion causes fretting. The addition maintains a film of lubrication on slow moving slides by combining excellent complex soap and solid lubricants, is suitable for use under water, or in high
of molybdenum disulphide provides extra protection against scoring and resistance to squeeze out with superb corrosion resistance. ambient temperatures. The specially designed cartridges screw into the
wear, making it ideal for automotive, industrial, agricultural and earthmoving AUTOGREASE system fitted to the breaker housing. The clear cartridge
equipment. allows the operator to easily monitor the grease usage from within the cab.

JCB STANDARD: 4003/1300 JCB STANDARD: 4003/1100 JCB STANDARD: 4003/2300


COLOR: GREY BLACK COLOR: DARK GREY COLOR: BLACK
SOAP TYPE: LITHIUM SOAP TYPE: LITHIUM SOAP TYPE: ALUMINIUM COMPLEX,
NLGI: 2 NLGI: 2 SOLID LUBRICANTS
DROP POINT (IP132): 365°F/185°C DROP POINT (IP132): 356°F/180°C NLGI: 2
WORKING TEMPERATURE RANGE: -4°F TO 245°F/-20°C TO 120°C WORKING TEMPERATURE RANGE: -4°F TO 245°F/-20°C TO 120°C DROP POINT (IP132): 500°F/260°C
FOUR BALL WELD: 694LB/315KG FOUR BALL WELD: 1543LB/700KG WORKING TEMPERATURE RANGE: -4°F TO 230°F/-20°C TO 110°C
FOUR BALL WELD: 760LB/345KG
Description Pack Size Part Number
JCB Extreme Performance Moly Grease 24x400g/14oz 4003/1327 Description Pack Size Part Number Description Pack Size Part Number
JCB Extreme Performance Moly Grease 12.5Kg/27.5lb 4003/1326 JCB Special Slide Grease 24x400g/14oz 4003/1115 JCB Autogrease 30x500g/17.6oz 4003/2305

JCB EXTREME PERFORMANCE HAMMER GREASE JCB SPECIAL HAMMER GREASE JCB SPECIAL SLEW PINION GREASE
JCB Extreme Hammer Grease is a unique formulation aluminium complex JCB Special Hammer Grease provides a highly effective lubricant on slow JCB Special Slew Pinion Grease is a soft, black, tenacious grease designed
grease for use where extremes of pressure and temperature are likely to be moving slides, along with an excellent corrosion resistant property. It specifically for the lubrication of large and heavy-duty open gears. Excellent
encountered. Particularly suited to hammer applications where resistance to combines the “self healing” action of oils with the resistance to drip of corrosion protection and load carrying properties throughout a large
water washing and migration may be critical. viscous compounds. temperature range.

JCB STANDARD: 4003/2100 JCB STANDARD: 4003/1100 JCB STANDARD: 4003/1600


COLOR: BLACK COLOR: DARK GREY COLOR: BLACK
SOAP TYPE: ALUMINIUM COMPLEX SOAP TYPE: LITHIUM SOAP TYPE: ORGANICALLY MODIFIED CLAY
NLGI: 2 NLGI: 2 NLGI: 2
DROP POINT (IP132): 482°F/250°C DROP POINT (IP132): 365°F/185°C DROP POINT (IP132): N/A
WORKING TEMPERATURE RANGE: -4°F TO 632°F/-20°C TO 160°C WORKING TEMPERATURE RANGE: 5°F TO 245°F/-15°C TO 120°C WORKING TEMPERATURE RANGE: -40°F TO 200°F/-40°C TO 100°C
FOUR BALL WELD: 1763LB/800KG FOUR BALL WELD: 1543LB/700KG

Description Pack Size Part Number


JCB Extreme Performance Hammer Grease 24x400g/140z 4003/2107 Description Pack Size Part Number Description Pack Size Part Number
JCB Extreme Performance Hammer Grease 12.5Kg/27.5lb 4003/2106 JCB Special Hammer Grease 24x400g/14oz 4003/1119 JCB Autogrease 24x400g/14oz 4003/1619

JCB LUBRICANTS NO COMPROMISE 21


THE RANGE.

JCB ENGINE OIL 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Ultra Performance Engine Oil 5W40 API: CJ-4 - 4001/3401U 4001/3405U 4001/3403U

JCB Ultra Performance Engine Oil 15W40 API: CJ-4 - - 4001/2905U 4001/2903U

JCB Ultra Performance Engine Oil 5W30 API: CJ-4 - - 4001/3105U -

JCB Ultra Performance Engine Oil 10W30 API: CJ-4 - - 4001/3005U -

JCB Extreme Performance Engine Oil 15W40 API: CH-4 - 4001/1801U 4001/1805U 4001/1803U

JCB High Performance Engine Oil 10W30 API: CH-4 / CG-4 - - 4001/1705U -

JCB High Performance Engine Oil 20W50 API: CH-4 - - 4001/1905U 4001/1903U

JCB High Performance Universal Agricultural Oil - - 4004/0305U -

JCB HYDRAULIC FLUID 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Ultra Performance Hydraulic Fluid 32 - - 4002/2805U -

JCB Optimum Performance Hydraulic Fluid 68 - - 4002/2705U -

JCB Optimum Performance Hydraulic Fluid 46 - 4002/2001U 4002/2005U -

JCB High Performance Hydraulic Fluid 68 - - 4002/0705U 4002/0701U

JCB High Performance Hydraulic Fluid 46 - 4002/0801U 4002/0805U 4002/0803U

JCB High Performance Hydraulic Fluid 32 - - 4002/1025U -

JCB High Performance Hydraulic Fluid 15 - 4002/0503U - -

JCB GEAR OIL 5 Litre / 1.3 US Gallon 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Optimum Performance Gear Oil 75W140 4000/4801U - - -

JCB Extreme Performance Gear Oil 85W140 - - 4000/0605U -

JCB High Performance Gear Oil - - 4000/0505U -

JCB High Performance Gear Oil Plus - 4000/2202U 4000/2205U 4000/2203U

JCB High Performance Gear Oil 90 - 4000/0301U 4000/0305U 4000/0303U

JCB High Performance Gear Oil LS (Limited Slip) Plus - - 4000/3905U -

22 JCB LUBRICANTS NO COMPROMISE


THE RANGE

JCB TRANSMISSION FLUID 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Optimum Performance Transmission Fluid - - 4004/6305U -

JCB Optimum Performance Clutch Fluid 4002/1904U - - -

JCB Extreme Performance Transmission Fluid 10W - 4000/2501U 4000/2505U 4000/2503U

JCB Extreme Performance Transmission Fluid SAE30 - 4000/2601U 4000/2605U 4000/2603U

JCB High Performance Universal ATF - - 4000/2305U -

JCB ANCILLARY PRODUCTS 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB High Performance Anti Squawk Fluid 4004/3904U - - -

JCB Hydraulic Anti-Stick Additive 4004/6704U - - -

JCB Antifreeze And Engine Coolant - Concentrate - 4006/1101U - -

JCB 50:50 Antifreeze And Engine Coolant - Readymix - 4006/1110U - -

1.3 US Gallon / 5 Litres 6x 400ml (Aerosols)

Waxoyl 4004/0502 4004/0501A

2.5 US Gallon / 9.4 Litres 55 US Gallon / 208 Litres 330 US Gallon / 1250 Litres

JCB Diesel Exhaust Fluid (DEF) 4007/1019L 4007/1013L 4007/1045L

JCB GREASE 14oz / 400g 17.6oz / 500g 27.5lb / 12.5Kg 39.7lb / 18Kg 110lb / 50Kg
JCB Special High Performance Grease 4003/2017 - 4003/2006 4003/2009 4003/2005

JCB Special Slew Pinion Grease 4003/1619 - - -

JCB Extreme Performance Moly Grease 4003/1327 - 4003/1326 -

JCB Special Slide Grease 4003/1115 - - -

JCB Special Hammer Grease 4003/1119 - - -

JCB Extreme Performance Hammer Grease 4003/2107 - 4003/2106 -

JCB Autogrease (500g Screw thread) - 4003/2305 - -

JCB LUBRICANTS NO COMPROMISE 23


SERVICE
JCB Inc. 2000 Bamford Blvd., Pooler, GA, 31322. Tel +1 (912) 447-2000

You might also like