Professional Documents
Culture Documents
PT8A2511
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Toaster Controller
Features Description
Defrost mode for frozen bread The PT8A2511 is a CMOS LSI chip designed for
Reheat mode toaster. Besides normal heating, it also provides defrost
Operating voltage: 3.5~5.5V and reheat work modes. It provides low cost solution for
Applications
Toaster
Pin Configuration
DEFROST 1 8 GND
PT8A2511PE
PT8A2511P
REHEAT 2 7 CX
RELAY 3 6 OSC
Vcc 4 5 RX
OSC 6 I/O Oscillator input/output, oscillator's Frequency of 1024Hz with an external R1,C1
Block Diagram
VCC
DEFROST Controller
RX
REHEAT
CX
Power
On Reset
system Frequency
RELAY
oscillator divider
OSC
Maximum Ratings
Note:
Storage Temperature ................................................................................... -40oC to +125oC Stresses greater than those listed under MAXIMUM
Ambient Temperature with Power Applied .................... 0 oC to +85 oC RATINGS may cause permanent damage to the
Supply Voltage to Ground Potential (Inputs & VCC Only)......................-0.5 to +5.5V device. This is a stress rating only and functional
operation of the device at these or any other condi-
Supply Voltage to Ground Potential (Outputs & D/O Only) ....................-0.5 to +5.5V
tions above those indicated in the operational sec-
DC Input Voltage ................................................................................................-0.5 to +5.5V tions of this specification is not implied. Exposure
DC Output Current ..........................................................................................................20mA to absolute maximum rating conditions for extended
Power Dissipation ........................................................................................................ 500mW periods may affect reliability.
Application Circuit
C3 VZ1 240
SLOT1
SLOT2
R16 R2 R14 R17 3.9V R5 1N4007
47UF R8
1K 1K 1K 1K R12 1K R9
C1
220UF/16V
R15 R10
REHEAT
DFROST
LEVER
S1
L1
PT8A2511P 220V
DEFROST SW1 1 DFROST GND 8
C2
REHEAT SW2 2 7 C4 D1
REHEAT CX
R3 2K 1N4148
R11 R13 3 6 222 223
RELAY OSC
Q1
510 510 VCC 4 5
VCC RX
R4 8050
R7
CANCEL
56k Note: It's better to make
TEM
NTC R18
SW3 C2 less than 563 and R7
R6 250k larger than 30k
Mechanical Information
PE (DIP-8)
Dimensions In Millimeters
Symbol
Min Max
A 3.710 4.310
A1 0.510
A2 3.200 3.600
B 0.380 0.570
B1 1.524 BSC
c 0.204 0.360
D 9.000 9.400
E 6.200 6.600
E1 7.320 7.920
Note: e 2.540 BSC
1) Controlling dimensions in millimeters.
L 3.000 3.600
2) Ref : JEDEC MS-001D/BA
E2 8.400 9.000
WE (SOIC-8)
Dimensions In Millimeters
Symbol
Min Max
A 1.350 1.750
A1 0.100 0.250
A2 1.350 1.550
b 0.330 0.510
Note:
c 0.170 0.250
1) Controlling dimensions in millimeters.
2) Ref : JEDEC MS-012E/AA D 4.700 5.100
E 3.800 4.000
E1 5.800 6.200
e 1.27 BSC
L 0.400 1.270
θ 0° 8°
Ordering Information
Part No. Package Code Package
PT8A2511PE P Lead free 8-pin DIP
PT8A2511WE W Lead free and Green 8-pin SOIC
Note:
E = Pb-free or Pb-free and Green
Adding X Suffix= Tape/Reel