Telephone (985)-876-4117 info@bwbcontrols.com ISO 9001 Certified
‘EHBI’ MASTER RELAY “PNEUMATIC SERVICE”
Designed and Manufactured using Safe Engineering Practices
15 July 2011 BWB Controls Telephone (985)-876-4117 info@bwbcontrols.com ISO 9001 Certified
‘EHBI’ MASTER RELAY “PNEUMATIC SERVICE” INSTALLATION CONNECTION 1/4" NPTF PANEL MOUNT 1 9/16" Diameter Hole PORT A Instrument Pressure Inlet 30-100 PSI (2.06-6.9 Bar) Orifice .250" (6.35mm) PORT B Supply Pressure Inlet 30-150 PSI (2.06-10.34 Bar) .250" (6.35mm) PORT C Supply Pressure Outlet .250" (6.35mm) PORT D Exhaust .250" (6.35mm) OPERATION The BWB "EHB" is a 3 way, normally closed, pilot operated, manual reset relay with manual lockout, and knob or indicator. It is normally installed near an actuator or in a control panel, and receives instrument pressure (Port A) from a safety system component such as a sensing device. During normal operation, the knob or indicator is manually pulled out, allowing instrument pressure (Port A) to hold the relay in the open position; supply pressure (Port B) passes through the outlet (Port C), and on to the actuator or system. When the sensing device is actuated, it will bleed the instrument pressure (Port A) from the relay and the spring will push the relay into the closed position; supply pressure (Port B) becomes blocked, while the outlet (Port C) is exhausted (Port D), thus closing the actuator or system. Should supply pressure (Port B) be required to open the actuator or system before instrument pressure (Port A) is returned, the lockout assembly may be used. The knob or indicator is manually pulled out and the lockout stem engaged. This allows supply pressure (Port B) to pass through the outlet (Port C) and on to the actuator or system. When instrument pressure (Port A) is returned the lockout stem will automatically release and the relay will resume normal operating conditions. FEATURES All Viton O-Rings All 316 Stainless Steel construction O-Rings do not cross directly over ports during operation, which maintains O-Ring longevity Relay can be manually closed by pushing knob or indicator Relay can be ordered with manual pin-out hole instead of lockout assembly Relay can be ordered with external pilot/solenoid operator assembly OPTIONS EHB (Knob) EHBI (Indicator) EHBP (Knob & Pin-out Hole) EHBPI (Indicator & Pin-out Hole) EHBAR (Knob & Auto Reset) EHBIAR (Indicator & Auto Reset) EHBM (Knob & Modified) EHBIM (Indicator & Modified) EHBRB (Knob & Remote) EHBIRB (Indicator & Remote) EHBXSR (Knob & Solenoid Operator) EHBIXSR (Indicator & Solenoid Operator) EHBPXSR (Knob Pin-Out Hole & Solenoid Oper) EHBPIXSR (Ind Pin-Out Hole & Solenoid Oper) WEIGHT EHB 4.00 Pounds EHBI 4.25 Pounds EHBAR 4.50 Pounds EHBIAR 4.75 Pounds EHBM 4.75 Pounds EHBIM 5.00 Pounds EHBRB 5.25 Pounds EHBIRB 5.50 Pounds EHBXSR 5.50 Pounds EHBIXSR 5.75 Pounds
Designed and Manufactured using Safe Engineering Practices