You are on page 1of 3

Ethio telecom ADSL Modem with WI-FI specification

Technical
Requirement
Specification
Scope:
Asymmetric digital subscriber line (ADSL) is a type of digital subscriber line (DSL) technology, a
1 data communications technology that enables faster data transmission and voice service over
copper telephone lines to home and business users.
2 - Detailed technical requirements
Communication:
2.1 Provide ADSL/ADSL2/ADSL2+ high speed Internet access over ordinary telephone wire
Compliant Standards:
2.2 ITU G.992.5, IEEE802.11b & IEEE802.11g
2.3
Interface:
2.4 ᴓ 10/100Base-T Ethernet interfaces,
ᴓ IEEE 802.11g/b wireless interfaces,
Access network ADSL transmission filter:
ᴓ ADSL splitters for European deployment
2.5 ᴓ Generic specifications of the low pass part of ADSL over POTS splitters
ᴓ Generic specifications of the high pass part of ADSL/POTS splitters

2.6 - Connectivity Technology wired and wireless


2.6.1 - Wireless Specifications
Standard:
2.6.1.1
IEEE 802.11b, IEEE 802.11g
Data Rates Supported:
ᴓ 802.11b: 1, 2, 5.5, 11Mbps
2.6.1.2 ᴓ 802.11g: 6, 9, 12, 18, 24, 36, 48 and 54Mbps; B/c these two are the maximum technology
limit

Radio Frequency:
2.6.1.3
DSSS (Direct Sequence Spread Spectrum) & OFDM (Orthogonal Frequency Division Multiplexing)
Frequency Band:
2.6.1.4 ISM Band, 2.4GHz or 5GHz (dual band)
Antenna Type:
2.6.1.5
Dual dipole antenna
Output Signal Power:
2.6.1.6 +13dBm(20mW) to +20dBm(100mW)
Modulation Type:
2.6.1.7 QPSK, BBPSK, CCK & OFDM
Radio Frequency (RF) Channels:
2.6.1.8 Up to 13 Channels
Wireless Clients:
2.6.1.9
Up to 25 users (depends on the customer’s requirement)
2.6.1.10 Operating Range:

Page | 1
50m
Encryption/Security:
2.6.2 64-bit WEP, 128-bit WEP, WPA and MAC address filtering
2.7 - Power Specification
2.7.1 - Power Supply
Input:
2.7.1.1
AC 100-240V, 50-60Hz, (<0.4A)
Output:
2.7.1.2
DC 12V, (<1.0A)
2.8 - LED Indicators
LEDs:
2.8.1 Power, ADSL, Internet, WLAN, LAN (1,2,3,4)
Internet Connection Types:
2.9 PPPoE, Static, DHCP, Bridge
The modem is expected to be highly reliable, less power consumption and well cooling
2.10 mechanism to resist high temperature
Management Protocol:
2.11 Network configuration using Web Based Configuration (HTTP), Remote management, Web
Based Firmware Upgrade, Diagnostic Tools

2.12 - Advanced Features


Support NAT, IP filtering and firewall functions
2.12.1

2.12.2 Support IP QoS functions


2.12.3 Provide functional features including subscriber isolation, ESSID hiding and multi-ESSID

2.12.4 Can be used either in routed or bridged mode

Support PVC:
2.12.5
Up to 8 PVCs
2.12.6 IPv6 and IPv4 dual stack
Compatibility:
2.13 Highly compatibility and interoperability with various access network devices (i.e. access
network devices of Huawei & ZTE)

2.14 ADSL equipment should not affect the performance of the analogue PSTN

Environment:
2.15 ᴓ Operating Temperature: 0°C - 45°C
ᴓ Storage Temperature: -40°C - 60°C

Page | 2
Package Contents:
ADSL Router………………...…………………………..x1
Splitter…………………..………………………………….x1
RJ-11 Telephone Cable……………………………..x2
RJ-11 Terminal Box…...………………………………x1
2.16
RJ-45 Ethernet Cable…………………………………x1
User Manual (English Language) ………………x1
Power adapter………………………………………….x1
Note:
If the customer requirement is only data – splitter and associated cables are not mandatory.

Page | 3

You might also like