Professional Documents
Culture Documents
Spinal System
Implants - Instruments
Surgical Technique
Introduction
The set used for the thoracolumbar fixation helps the surgeon to
complete a surgery easily with ergonomically designed
instruments.
Cancellous Thread
T1
30°
30°
Frod F1
T1: Torque
F1: Insertion force
Frod: Rods force to nut
Implants
Screw Length(mm)
increasing 5 mms for every size.
30
35
Diameter
Screw Length
40
45
50
55
60
+
+ : Optional Size
50
55
60
+
+ : Optional Size
Implants
Screw Length(mm)
30
35
Diameter
Screw Length
40
45
50
55
60
+
+ : Optional Size
50
55
60
+
+ : Optional Size
Implants
5 7
Hook Height(mm)
an alternative solution where pedicular
screws are not wanted to be used.
5
According to the condition of the laminar,
the height and width of the appropriate
6
hook is found.
7
Hook Height
+
+ : Optional Size
Hook Width
Hook Height(mm)
an alternative solution where pedicular
screws are not wanted to be used.
5
According to the condition of the
pedicule, the height and width of the
6
appropriate hook is found.
7
Hook Height
+
+ : Optional Size
Hook Width
7
Height
(mm)
Hook
Hook Width
Implants
30 40
Total Size(mm)
40 50
The Multiaxial Connector offers
parallel and angled alignment of 50 60
the rod system on the opposite
pedicules. The middle part of the
60 70
assembly is helpful when given the
proper angle. In addition, during
the rod assembly, angle can be
given thanks to its angular design.
Total Size
30 40
Total Size(mm)
40 50
The Nemesis Connector is inserted
above the rods. Due to its design 50 60
the length is adjustable.
60 70
Total Size
Rod Diameter
50
The Hook Connector is avaliable for
40 mms and up to 100 mms of 60
Rod Length(mm)
Rod Diameter(mm)
40
Osi Spinal System Rod are
made from Ti6Al4V ELI. The
Osi Spinal System Rod are
made from CoCr. The rod
50
rod diameter is 5.5 mms. diameter is 5.5 mms.
60
70
Rod Diameter
80
90
100
110
Rod Length
120
Rod Length(mm)
130
140
150
160
170
Osi Pre-Bent Rod
180
Osi Prebent-Rod is made from Ti6Al4V ELI. 190
The rod diameter is 5.5 mms.The same
size as Osi Rod. 200
250
Rod Diameter 300
400
500
Rod Length
600
700
Implants
5.5
Rod Length(mm)
Rod Diameter 70
80
90
Rod Length
100
110
120
130
135
The Osi Double Cup Connector, which is one of the Osi Spinal
System connectors, allows for clear mounting of the two rod
connections parallelly.
Implants
5.5
Rod Length(mm)
Rod Length
40
45
50
Rod Diameter
55
60
65
70
+
+ : Optional Size
5.5
Rod Diameter
Instruments
Osi Awl
333-AW
Osi T Handle
H90-1/4
Osi Rocker
OSI-RCK-2008
Osi Hammer
333-HM
Caddies
(Figure 1: 333-AW)
(Figure 2: 333-PP)
(Figure 3: 333-PPC)
Surgical Technique
(Figure 4: 333-FE)
(Figure 5: 333-FEC)
Surgical Technique
Osi Bone Tap
With the Osi Tap that has two different handle options (Figure 6, Figure 7), which has the same design
as the Osi Pedicle Screw, the hole for the Osi Screw is prepared.
(Figure 13)
(Figure 14:OSI-RB-2012)
Surgical Technique
The Osi Rod is inserted into the screw with the Osi Rod If extra force is required to hold the Osi Rod Osi Rod
Holder (Figure 15). Gripper is used (Figure 16).
Osi Rocker
(Figure 17:OSI-RCK-2008)
Surgical Technique
Osi Persuader
(Figure 18:OSI-PSU1)
The Osi Nut placed on the Osi Persuader Nut Driver(Figure 20),
is sent through the Osi Persuader Rod Reducer(Figure 19) to
perform the nut tightening operation (Figure 21).
Osi Compressor and Osi Distractor allow the vertebrae, where the implants are placed, to be safely
brought closer together or removed away from the screws(Figure 23, Figure 24 , Figure 25).
(Figure 25)
Surgical Technique
In order to provide the desired anatomical angle, Osi In-stu Bender 's(Figure 26) are used to bend
the rods to a desired angle.
Surgical Technique
(Figure 29)
Surgical Technique
(Figure 27 :OSI-HC-2016)
Surgical Technique
Using the Hook Transverse Connector Driver (Figure 30), two rods are
connected to each other with a Hook Transverse Connector.
(Figure 32)
Osi Spinal System Set
www.osimplant.com.tr
HEADQUARTER
Osimplant Medical Materials
FACTORY
İlkbahar Ave. Galip Erdem St. İkitelli O.S.B.14. St. Mutfakçılar
(571. St.) No:47, 06550 Industrial Site, 4 Block No:47
Çankaya/Ankara, Turkey İkitelli/İstanbul, Turkey
sales@osimplant.com.tr info@bonimplant.com.tr