The document provides instructions for a design project involving a partially openable and fixed window. It specifies that the window is 2000mm wide and 1200mm high with a fixed sill level of 900mm from the floor. The student is asked to submit:
1) A front elevation of the window at a 1:20 scale showing the arrangement of fixed and openable glass shutters.
2) A detail of fixing the Z-section vertical frame member to a brick wall at a 1:1 scale.
3) A detail of fixing a hinged, openable shutter to the door frame and vertical member at a 1:1 scale.
The document provides instructions for a design project involving a partially openable and fixed window. It specifies that the window is 2000mm wide and 1200mm high with a fixed sill level of 900mm from the floor. The student is asked to submit:
1) A front elevation of the window at a 1:20 scale showing the arrangement of fixed and openable glass shutters.
2) A detail of fixing the Z-section vertical frame member to a brick wall at a 1:1 scale.
3) A detail of fixing a hinged, openable shutter to the door frame and vertical member at a 1:1 scale.
The document provides instructions for a design project involving a partially openable and fixed window. It specifies that the window is 2000mm wide and 1200mm high with a fixed sill level of 900mm from the floor. The student is asked to submit:
1) A front elevation of the window at a 1:20 scale showing the arrangement of fixed and openable glass shutters.
2) A detail of fixing the Z-section vertical frame member to a brick wall at a 1:1 scale.
3) A detail of fixing a hinged, openable shutter to the door frame and vertical member at a 1:1 scale.
Design a partially openable and partially level fixed glazed Printed Pages—2 AR502
steel Z – section window. The window is 2000 mm wide and
1200 mm high and fixed at a sill level of 900 mm from the (Following Paper ID and Roll No. to be filled in your Answer Book) floor level. You are required to submit the following : PAPER ID : 8513 Roll No. (a) Front elevation showing the arrangement of fixed and openable glazed shutters in the window, to the scale of B.Arch. 1:20. (SEM. V) ODD SEMESTER THEORY (b) Detail of fixing Z – section vertical member with brick EXAMINATION 2013-14 wall, to the scale of 1:1. CONSTRUCTION AND MATERIALS – V (c) Detail of fixing hinged shutter (openable) with door frame with vertical member of the frame, to the scale of 1:1. Time : 3 Hours Total Marks : 50 3. Draw construction details of the following (any three) : (15) Note :– (i) Attempt all the questions. (a) Fixing of 6 mm thick float glass to aluminium box section. (ii) Marks are indicated against each question. (b) Fixing details of POP false ceiling (iii) Assume any missing data. (c) Construction detail of Metal Stud Partition. (d) Fixing of particle board to aluminium box section. 4. Differentiate between the utilities of the following (any two) : 1. Attempt any two of the following : (10) (10) (a) Discuss Soldering and Welding (a) Venetian blinds and curtains (b) Discuss manufacturing process of mild steel. (b) Floor spring and hydraulic door closure (c) Discuss manufacturing process of gypsum board. (c) Back flap hinge and butt hinge. 2. Design a mild steel shed with 16 mts (width), 32 mts (depth) with a clear height of 5 mts is to be erected for a factory. You are required to design and draw the following : (a) Layout plan showing arrangement of column and spanning members to scale of 1:100. (b) Typical cross section a scale of 1:100. (c) Isometric detail showing the fixing of spanning member with column, to a scale of 1:10. (15) OR AR502/DNG-51865 800 AR502/DNG-51865 [Turn Over