Professional Documents
Culture Documents
Main dimensions
Bulk operation
Load diagram
160
140
on the ropes
120
Capacity (t)
100
80 motor grab
60 4-rope grab
40
20
0
0 5 10 15 20 25 30 35 40 45 50 55
Outreach (m)
35.3 m
(depending on grab)
Boom fulcrum 17.7 m
12 m
2 LHM 500
Bulk operation
• During grab operation, hoisting, slewing, and luffing are • To provide safe and stress-free working conditions for
driven simultaneously at maximized speed to achieve the the operator, Liebherr offers the Cycoptronic® including
highest (possible) turnover. Teach-In® feature, a semi-automatic system, which pilots
the crane from the vessel hatch to the quay without
• During grab filling, features such as automatic lowering
any sway. Especially for bulk operation into hoppers,
and hoisting guarantee the optimum filling level of the
the Teach-In® system increases turnover and ensures
grab.
consistent turnover rates during the entire ship unloading.
• The slack rope monitoring system ensures extended life-
• Liebherr technology is absolutely resistant to all types of
time of the ropes and increases operational safety.
dust and dirt due to the closed hydraulic system and an
• Reverse power is returned to the drive process through electronic system which is military proven and tested.
closed loop hydraulics which results in reduced fuel
• The airflow needed for cooling hydraulic and engine
consumption.
systems is routed external from the main machinery
• The Cycoptronic® anti-sway system automatically house. This helps keep the engine room clean and free
compensates for all rotational swing, transverse and of debris.
longitudinal sway of the load at maximum speeds.
LHM 500
Main dimensions
Container operation
Load diagram
160
140
on the ropes
120
Capacity (t)
100
80
60 general cargo
twin lift spreader
40
20
single lift spreader
0
0 5 10 15 20 25 30 35 40 45 50 55
Outreach (m)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
35.3 m
4 LHM 500
Container operation
• The crane can be fitted with various types of spreaders • Safety: The luffing cylinder is positioned above the lattice
(fixed or telescopic) connected to the rotator. Manual, semi boom. This eliminates the possibility of any damage to the
or fully automatic telescopic spreaders are available for cylinder through swinging loads or highly stowed rows of
various container sizes. containers on board the vessel.
• Liebherr Cycoptronic® is an accurate, sway-free load motion • The Liebherr hydrostatic drive is the most reliable and
control system that uses in-house designed software. highest performing drive system for mobile harbour
Cycoptronic® allows for direct load positioning and aids cranes. Independent closed loop hydraulic systems utilize
the crane driver in mastering his task. With Cycoptronic® the minimum number of components to guarantee highly
turnover, safety and the confidence of the operator will be responsive, smooth and precise operation while maximizing
improved. operational safety.
LHM 500
Undercarriage
longitudinally
12
diagonally m 1.8 m
5.
5
m 6m
12 m
sideways
curves
6 LHM 500
Technical data
Working speeds
Hoisting / lowering 0 — 90 m/min Hoisting heights
Slewing 0 — 1.6 rpm Above quay at minimum radius 45 m
Luffing 0 — 100 m/min Above quay at maximum radius 33 m
Travelling 0 — 5.4 km/h Below quay level 15 m
Optional equipment
1. Cycoptronic® - anti-sway system 12. Radio remote control
2. Teach-In® - semi-automatic point to point system 13. Autopropping undercarriage
3. Vertical Line Finder ® - diagonal pull preventing system 14. Cyclone air-intake system for the engine
4. Dynamic Anti-Collision System 15. Low temperature package
5. Synchronizing Crane Control System 16. Tropical temperature package
6. Economy software - for optimised fuel consumption 17. Customer-specific painting & logo
7. Modem for data transfer and telediagnosis 18. Additional (driven) axle sets
8. SCULI (crane analyzer with various features)
® 19. Axle sets equipped with foamed tyres
9. Data Recorder 20. Different supporting bases and pad sizes
10. Machine Data Recording 21. Tower extension 4.8 m
11. Video monitoring system 22. And many more as per customers requirements
LHM 500
Practical solutions
• The Liebherr Portal Crane, LPS, is an efficient combination having no or few quays. In addition, the LBS solution allows
of a space-saving portal (mounted on rails) and the proven direct cargo transfer from ship to shore – especially when
mobile harbour crane concept. Particularly on narrow quays reach capacity limits.
quays, individual portal solutions permit (railway) trains and
• Depending on customer specifications, the LBS range may
(road) trucks to travel below the portal.
have varying lifting capacities due to tailor-made design so-
• Liebherr floating cranes, LBS, can be used for transhipment lutions.
and midstream operation between ocean-going vessels and
river barges on different types of waterways, including those