Professional Documents
Culture Documents
the slopes
First step- You got and click SEARCH- By ATTRIBUTE NSME AND DESCRIPTION- then it will show a box
and there sare your slopes, their value. After you look to see you have them you click Close. (See the
picture below)
Step two- OVERLAYER( is the box where you can see whatever you digitized) – you have to click on
Curbe (Slopes) – like the piture below- and then you click OPTIONS – there will be another box that will
show up- you will go to GET ELEVATION FROM ATTRIBUTE VALUE( I MAD A REDE CIRCLE ON THE
PICTURE WHERE THIDS IS IT)- APPLY-OK
Step 3- ANALYSIS-CREATE ELEVATION FOR- OK (see the pictures below)
Step 4- TOOLS- CONFIGURE- SHADER OPTIONS- SLOPE VALUE- first you go to Minimum Value
and put 0 then you go to Maximum Value and put 89
Step5- OVERLAYER- there you can see you have a new option-Triangulated elevation grid- if you
close the layer with curbe( slopes( you map should look like the one in the picture)
You will click right and a big box will show up (picture below)
You need to write the same
value as me and then clik
ok
The last step- you will dezactivate everything except the last thing it showed. It will result a map
You will go to File –Export- Export Vector Format. It will appear a box and there you will select
SHAPEFILE then click ok
THEN YOU WILL CLICK ON OPEN MY FILE AND YOU WILL GO TO YOUR FOLDER WHERE YOU SAVED
CURBE AND SELECT ALL OF THEM
THIS IS HOW IT SHOULD
LOOK LIKE, YYOU ONLY
NEED TO COLOUR
THEM NOW LIKE I TOLD
HYOU IN GTHE 3
COLORS- YELLOW,
GREEN AND RED. SO
FROM 0-10 DEGREE
YOU HAVE YELLOW THE
10-20 YOU HAVE GREEN
AND WHATEVER IT S
BIGGER THAN 20 WILL
BE RED. TO COLOUR
YOU CLICK ON THE
NAME OF THE SLOPE IN
MY CASE THERE IS THE
0 SLOPE AND YOU WILL
GO TO OPTIONS