Professional Documents
Culture Documents
1. Press [*] 2. Press [#] . 3. Enter the administrator
(The indicator is off and (You can authenticate the password. (The initial
makes a long beep.) password.) password is 1234.)
Yes
5. Exit. (Press [*] or do not
operate the device within
4. The authentication is
20 seconds ,The indicator
successful. (The indicator
turns red and makes a long
turns green.)
beep, then automatically
exit.)
Failed.
(The indicator turns red Yes
and makes three beeps.)
6. Exit. (The indicator turns 5. Succeed. (The indicator 4. Enter the new
red and makes a long beep, turns green and the makes administrator password
then automatically exit.) a long beep.) again for authentication.
2. Press [0]. (The indicator 3. Press [0]. (The indicator
1. The administrator
turns green and makes a turns green and makes a
password is authenticated.
long beep.) long beep.)
4. Register cards.
( Swipe the card once.)
1. The administrator 2. Press [1].
password is (The indicator turns green
authenticated. and makes a long beep.)
3. Input user ID twice
(The indicator turns green 4. Register cards.
and makes a long beep.) ( Swipe the card once.)
1. The administrator 2. Press [6]. (Registering 3. Swipe the first card once
password is authenticated. Cards in Batches.) only. ( Swipe the card once.)
Failed. Yes
(The indicator turns red
and makes three beeps.)
6. Exit. (The indicator turns
red and makes a long beep, 5. Cards are registered in 4. Enter the total number
then automatically exit.) batches successfully. of cards.
7. Exit. (Press [*], the 6. Register successfully. 4. Enter the password twice.
indicator turns red and (The indicator turns green (The password consists of
makes a long beep, then and makes a long beep.) four digits.)
automatically exit)
3. The authentication is
2. Swipe card, or enter Yes successful. (The indicator
1. The device is in the
password. Press [#] after
authentication state. turns green and makes a
entering a password.
long beep.)
Failed.
(The indicator turns red and
makes two short beeps.)
2. Press [9]. (The indicator 3. Press [9]. (The indicator
1. The administrator
turns green and makes a turns green and makes a
password is authenticated.
long beep.) long beep.)
2. Press [4]. (The indicator
1. The administrator 3. Enter the unlocking
turns green and makes a
password is authenticated. duration. (range: 1s to 254s)
long beep.)
4. The configuration is
5. Exit. (The indicator turns
successful. (The indicator
red and makes a long beep,
turns green and makes a
then automatically exit.)
long beep.)
1. The administrator
2. Press [0]. (The indicator 3. Press [3]. (The indicator
turns green and makes a turns green and makes a
password is authenticated.
long beep.) long beep.)
5. The configuration is
6. Exit. (The indicator turns red successful. (The indicator 4. Configure the concealed
and makes a long beep, then
automatically exit.)
turns green and makes a mode. (0: enable; 1: disable).
long beep.)
●
●
●
1. The administrator 2. Press [0]. (The indicator 3. Press [5]. (The indicator
password is authenticated. turns green and makes a turns green and makes a long
long beep.) beep.)
1. The administrator
2. Press [0]. (The indicator 3. Press [2]. (The indicator
password is authenticated. turns green and makes a turns green and makes a
long beep.) long beep.)
1. The administrator
2. Press [0]. (The indicator 3. Press [4]. (The
turns green and makes a indicator turns green and
password is authenticated.
long beep.) makes a long beep.)
5. The configuration is
6.Exit. (The indicator turns successful.
red and makes a long beep, 4.Configure the alarm
(The indicator turns green delay. (range: 1s to 254s)
then automatically exit.) and makes a long beep.)
1. The administrator
2. Press [0]. (The indicator 3.Press [9]. (The indicator
turns green and makes a turns green and makes a
password is authenticated.
long beep.) long beep.)
5. The configuration is
6.Exit. (The indicator turns
successful.
red and makes a long beep, 4. Press [9]. (a short beep)
(The indicator turns green
then automatically exit.) and makes a long beep.)
2. Press [0]. (The indicator 3. Press [6]. (The indicator
1. The administrator turns green and makes a turns green and makes a
password is authenticated. long beep.) long beep.)