You are on page 1of 12

1 The flux density is ___ when the magnetic flux is 9 µWb and the cross-sectional

area of the magnetic field is 5 × 10–3 m2.

Correct Answer :
1800 µT
Details
2 What is the reluctance of a material that has a length of 0.045 m, a cross-sectional area of
0.015 m2, and a permeability of 2500 µWb/At·m?

Correct Answer :
1200 At/Wb
Details
3 The unit of flux density is known as:

Correct Answer :
a tesla
Details
4 What is the magnetomotive force in a 150-turn coil of wire with 2 A flowing through it?

Correct Answer :
300 At
Details
5 What is the flux density of a magnetic field whose flux is 3000 µWb and cross-sectional
area is 0.25 m2?

Correct Answer :
12,000 μ T
Details
6 How much flux is there in a magnetic field when its flux density is 5000 μ T and its cross-
sectional area is 300 mm2?

Correct Answer :
1.5 μ Wb
Details
7 When these numbers are multiplied, (6 × 103) (5 × 105), the result is:

Correct Answer :
30 × 108
Details
8 Resistance is measured in.

Correct Answer :
ohms
Details
9 The number 65,000 expressed in scientific notation as a number between 1 and 10 times a
power of ten is:

Correct Answer :
6.5 × 104
Details

10 When converting 7,000 nA to microamperes, the result is:


Correct Answer :
7 µA
Details

Questions
Correct Wrong
1 The number of kilowatts in 135 milliwatts is:

Correct Answer :
1.35 × 10–4 kW
Details
2 The number 4.4 × 106 ohms expressed using a metric prefix is:

Correct Answer :
4.4 M
Details
3 The number of microamperes in 2 milliamperes is:

Correct Answer :
2,000 µA
Details
4 The number of millivolts in 0.06 kilovolts is:

Correct Answer :
60,000 mV
Details
5 Eighteen thousand watts is the same as:

Correct Answer :
18 kW
Details
6 The number 3.2 × 10–5 A expressed using a metric prefix is:

Correct Answer :
32 µA
Details
7 When converting 0.16 mA to microamperes, the result is:

Correct Answer :
160 µA
Details
8 When these numbers are added, (87 × 105) + (2.5 × 106), the result is:

Correct Answer :
112 × 105
Details
9 The quantity 3.3 × 103 is the same as:

Correct Answer :
3,300
Details
10 Which of the following is not an electrical quantity?
Correct Answer :
distance
Details

1 Seven thousand volts can be expressed as:

Correct Answer :
7 kV
Details
2 The number 4,500,000 can be expressed as:

Correct Answer :
4.5 × 106
Details
3 When converting 1,600 kilohms to megohms, the result is:

Correct Answer :
1.6 M Ω
Details
4 What is (79 × 106)/(12 × 10–8)?

Correct Answer :
6.58 × 1014
Details
5 Fourteen milliamperes can be expressed as:

Correct Answer :
14 mA
Details
6 The number 4.38 × 10–3 expressed as a number having a power of 10–6 is:

Correct Answer :
4,380 × 10–6
Details
7 Voltage is measured in.

Correct Answer :
volts
Details
8 The number 0.0003 multiplied by 10-3 is:

Correct Answer :
0.0000003
Details
9 The number of megohms in 0.03 kilohms is:

Correct Answer :
3 × 10–5 M Ω
Details

10 Current is measured in.


Correct Answer :
amperes
Details

1 A 33 Ω half-watt resistor and a 330 Ω half-watt resistor are connected across a 12 V


source. Which one(s) will overheat?

Correct Answer :
neither resistor
Details
2 In 0.025 W, there are:

Correct Answer :
25 mW
Details
3 A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many
kilowatt-hours of energy does it consume?

Correct Answer :
201.6 kWh
Details
4 A power supply produces a 0.6 W output with an input of 0.7 W. Its percentage of efficiency
is:

Correct Answer :
85.7%
Details
5 A given power supply is capable of providing 6 A for 3.5 h. Its ampere-hour rating is:

Correct Answer :
21 Ah
Details
6 A 15 V source is connected across a 12 Ω resistor. How much energy is used in three
minutes?

Correct Answer :
0.938 Wh
Details
7 At the end of a 14 day period, your utility bill shows that you have used 18 kWh. What is
your average daily power?

Correct Answer :
1.286 kWh
Details
8 A 120 Ω resistor must carry a maximum current of 25 mA. Its rating should be at least.

Correct Answer :
150 mW
Details

9 If you used 400 W of power for 30 h, you have used.


Correct Answer :
12 kWh
Details
10 A 6 V battery is connected to a 300 Ω load. Under these conditions, it is rated at 40 Ah.
How long can it supply current to the load?

Correct Answer :
2,000 h
Details

1 How much continuous current can be drawn from a 60 Ah battery for 14 h?

Correct Answer :
4.28 A
Details
2 A 75 Ω load uses 2 W of power. The output voltage of the power supply is approximately.

Correct Answer :
12 V
Details
3 When the current through a 12 k Ω resistor is 8 mA, the power is:

Correct Answer :
768 mW
Details
4 A 68 Ω resistor is connected across the terminals of a 3 V battery. The power dissipation of
the resistor is:

Correct Answer :
132 mW
Details
5 The minimum resistance value for a blue, gray, red, silver resistor is:

Correct Answer :
6,120 Ω
Details
6 The maximum resistance value for a brown, red, yellow, gold resistor is:

Correct Answer :
126,000 Ω
Details
7 Which of the following is not a type of energy source?

Correct Answer :
rheostat
Details
8 When placed close together, two positively charged materials will.

Correct Answer :
repel
Details
9 The conductance of an 8 ohm resistance is:

Correct Answer :
125 mS
Details
10 Eight-tenths coulomb passes a point in 4 s. The current in amperes is:

Correct Answer :
0.2 A
Details

1 When the current is 2.5 A, how many coulombs pass a point in 0.2 s?

Correct Answer :
0.5 C
Details
2 The colored bands for a 4,700 ohm resistor with a ten percent tolerance are:

Correct Answer :
yellow, violet, red, silver
Details
3 The unit of electrical charge is the.

Correct Answer :
coulomb
Details
4 A multimeter measures.

Correct Answer :
current, voltage, and resistance
Details
5 If there is 6 A of current through the filament of a lamp, how many coulombs of charge
move through the filament in 1.75 s?

Correct Answer :
10.5 C
Details
6 A red, red, orange, gold resistor has a nominal value of:

Correct Answer :
22,000 Ω
Details
7 An ohmmeter is an instrument for measuring.

Correct Answer :
resistance
Details
8 An ammeter is an electrical instrument used to measure.

Correct Answer :
current
Details
9 The current in a given circuit is not to exceed 24 A. Which value of fuse is best?
Correct Answer :
24 A
Details
10 The unit of electrical charge is the.

Correct Answer :
coulomb
Details

1 In 40 kW, there are:

Correct Answer :
40,000 W
Details
2 If you used 600 W of power for 60 h, you have used:

Correct Answer :
36 kWh
Details
3 If it takes 400 ms to use 12,000 J of energy, the power is:

Correct Answer :
30 kW
Details
4 How many watt-hours represent 65 W used for 18 h?

Correct Answer :
1,170 Wh
Details
5 For 12 V and 40 mA, the power is:

Correct Answer :
all of these choices
Details
6 A 220 Ω resistor dissipates 3 W. The voltage is:

Correct Answer :
25.7 V
Details
7 A 3.3 k Ω resistor dissipates 0.25 W. The current is:

Correct Answer :
8.7 mA
Details
8 A half-watt is equal to how many milliwatts?

Correct Answer :
500 mW
Details
9 Three hundred joules of energy are consumed in 15 s. The power is:

Correct Answer :
20 W
Details
10 The power rating of a carbon-composition resistor that is to handle up to 1.2 W should be:

Correct Answer :
2W
Details

1 An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element
is approximately.

Answer: 31 Ω Details
2 If 750 µA is flowing through 11 k Ω of resistance, what is the voltage drop across the
resistor?

Answer: 8.25 V Details


3 The formula to find I when the values of V and R are known is:

Answer:
I = V/R
Details
4 A resistor is connected across a 50 V source. What is the current in the resistor if the color
code is red, orange, orange, silver?

Answer: 2.2 mA Details


5 Approximately how many milliamperes of current flow through a circuit with a 40 V source
and 6.8 k Ω of resistance?

Answer: 5.9 mA Details


6 How much resistance is required to limit the current from a 12 V battery to 3.6 mA?

Answer: 3.3 k Ω Details


7 What is the voltage source for a circuit carrying 2 A of current through a 36 Ω resistor?

Answer: 72 V Details
8 What is the approximate resistance setting of a rheostat in which 650 mA of current flows
with a 150 V source?

Answer: 230 Ω Details


9 How much voltage is needed to produce 2.5 A of current through a 200 Ω resistor?

Answer: 500 VDetails


10 When there is 12 mA of current through a 1.2 k Ω resistor, the voltage across the resistor is:

Answer: 14.4 V Details


1 How much resistance is required to limit the current from a 12 V battery to 3.6 mA?

Answer: 3.3 k Ω Details


2 What is the voltage source for a circuit carrying 2 A of current through a 36 Ω resistor?
Answer: 72 V Details
3 What is the approximate resistance setting of a rheostat in which 650 mA of current flows
with a 150 V source?

Answer: 230 Ω Details

4 How much voltage is needed to produce 2.5 A of current through a 200 Ω resistor?

Answer: 500 VDetails


5 When there is 12 mA of current through a 1.2 k Ω resistor, the voltage across the resistor is:

Answer: 14.4 V Details


6 How much resistance is needed to draw 17.6 mA from a 12 volt source?

Answer: 680 Ω Details


7 How much current is produced by a voltage of 18 kV across a 15 k Ω resistance?

Answer: 1.2 A Details


8 A current of 200 µA through a 6.8 k Ω resistor produces a voltage drop of:

Answer: 1.36 V Details


9 Four amperes of current are measured through a 24 Ω resistor connected across a voltage
source. How much voltage does the source produce?

Answer: 96 V Details
10 Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the
value of the resistor?

Answer: 4 kΩ Details
1 When 12 V are applied across a 68 Ω resistor, the current is:

Answer: 176 mA Details


2 Approximately how much current flows through a 3.3 M Ω resistor across a 30 V source?

Answer: 9 μ A Details
3 A 120 V lamp-dimming circuit is controlled by a rheostat and protected from excessive
current by a 3 A fuse. To what minimum resistance value can the rheostat be set without blowing
the fuse? Assume a lamp resistance of 20 ohms.

Answer: 20 Ω Details
4 What is the approximate filament resistance of a light bulb if it operates from a 110 V
source and 0.6 A of current is flowing?

Answer: 183 Ω Details


5 What is the approximate resistance of a rheostat if the voltage source is 18 V and the
current is 220 mA?

Answer: 82 Ω Details
6 Given a dc voltage source delivering 24 V and a circuit resistance of 3.3 K Ω, what is the
current?
Answer: 7.3 mA. Details
7 Suppose that a circuit has 472 Ω of resistance and the current is 875 mA. Then the source
voltage is:

Answer: 413 V. Details


8 The dc voltage in a circuit is 550 mV and the current is 7.2 mA. Then the resistance is:

Answer: 76 Ω. Details
9 Given a dc voltage source of 3.5 kV and a circuit resistance of 220 Ω, what is the current?

Answer: None of these choices Details


10 A circuit has a total resistance of 473,332 Ω and draws 4.4 mA. The best expression for the
voltage of the source is:

Answer: 2.1 kV. Details

1 Permeability is the inverse equivalent of which electrical term?

Answer: Resistance Details


2 Which electromagnetic device uses brushes and a commutator?

Answer: A dc generator Details


3 What are the effects of moving a closed wire loop through a magnetic field?

Answer: All of these choices Details


4 The Hall effect.

Answer: is used in various sensor applications Details


5 "Series" and "parallel" as applied to dc motors refer to:

Answer: the connection of the field coil and armature windings Details
6 The component that produces power in an electromagnetic generator is called the.

Answer: Armature Details


7 A Hall effect sensor.

Answer: is a noncontacting magnetic sensor Details


8 Which two values are plotted on a B-H curve graph?

Answer: Flux density and magnetizing force Details


9 Which electromagnetic device has a flexible cone?

Answer: A speaker Details


10 What do you call the characteristic of a magnetic material whereby a change in
magnetization lags the application of a magnetizing force?

Answer: Hysteresis Details


1 Which electromagnetic device has a movable iron core called a plunger?

Answer: A solenoid Details


2 Which electromagnetic device contains an armature?

Answer: A dc generator Details

3 The polarity of induced voltage while a field is collapsing is:

Answer: opposite to the force creating the field Details


4 When the current through a coil reverses direction, the magnetic field around the coil
_____.

Answer: reverses direction Details


5 After the magnetizing force has been removed, the ratio of the remaining magnetic flux to
the saturated magnetic flux is called _____________.

Answer: Retentivity Details


6 You can determine the direction of the lines of force surrounding a conductor by using
_____.

Answer: the right-hand rule Details


7 A group of force lines going from the north pole to the south pole of a magnet is called the
magnetic ___.

Answer: Flux Details


8 The induced voltage across a stationary conductor in a stationary magnetic field ___.

Answer: equals 0 V Details


9 When the speed at which a conductor is moved through a magnetic field is increased, the
induced voltage will _____.

Answer: Increase Details


10 ___ is the ability of a material to remain magnetized after removal of the magnetizing force.

Answer: Retentivity Details

1 When a current carrying conductor is brought into magnetic field, the force that moves the
conductor depends upon.

Answer: the value of current Details


2 In H-plane metal plate lens the travelling wave front is:

Answer: retarded Details


3 Electric lines of force do not cross each other because.

Answer: the tangent to the line of force gives the direction of E and if they cross two
tangents for E which is not possibleDetails
4 A uniform wave have components.

Answer: E and H existing only in direction perpendicular to direction of propagation


Details
5 The thin parallel wires are carrying current along the same direction. The force experienced
by one due to the other is:
Answer: perpendicular to the lines and attractive Details
6 Ferromagnetic materials have minute magnetic ___ created within their atomic structure by
the orbital motion and spin of electrons.

Answer: domains Details


7 The ___ is an electromagnetic device that contains a coil rotating on a jeweled bearing
mount.

Answer: d'Arsonval movement Details


8 The movable part in a relay is the _____.

Answer: armature Details


9 Transverse magnetic (TM) waves have:

Answer: electric field component E in the direction of propagation and no component of


magnetic field H in this direction Details
10 When an electromagnetic wave travelling in one medium strikes upon a second medium
(having a different conductivity) the wave will be:

Answer: partially transmitted and partially reflected Details

You might also like