Professional Documents
Culture Documents
Dear Sir,
We are pleased to quote below the products supplied by us. Kindly refer to page no. 2 to 23 for details and rates
of products and page no. 24 for terms and conditions of supply.
VOLTAGE STABILIZERS DIGITAL MULTIMETERS TONG TESTERS CAPACITANCE METERS LCR METERS TABLE TOP
DIGITAL MULTIMETER
FUNCTION GENERATOR SIGNAL GENERATOR PH METER CONDUCTIVITY METER POWER SUPPLIES RESISTANCE METER
(SINE SQUARE) (DC REGULATED) (micro ohm/milli ohm/ ohm/
kilo ohm meters)
RPM METERS
HIGH VOLTAGE (TACHO METERS) LUX METER ANEMOMETER SOUND LEVEL METER DIGITAL FLUX METER
BREAKDOWN (LIGHT INTENSITY METER) (AIR VELOCITY METER) (NOISE LEVEL METER)
(FLASH TESTERS)
TERMS
AND
CONDITIONS
OF SUPPLY
Page: 20, 21, 22 Page: 23 Page: 23 Page: 23 Page: 23 Page: 24
Products for : Industries, Laboratories, Railways, Defence, Colleges, R & D, Computers, Offices, Communications, Medicals, etc.
ACCESS VS Series of servo controlled voltage stabilizers are suitable for computers, computer peripherals fax machines, EPABX systems,
telex, photo-copiers, office automation products, telecommunication systems, bio-medical equipments, microprocessor based equipments,
CNC machines, electronic typewriters, photo processing labs, testing labs, production lines, moulding machines, TV sets, VCRs, DVD players,
air conditioners, transmitters, cable TV control rooms, signaling equipment, PA systems, radars, scientific apparatus, chemical labs, safety
alarms, cash registers, weighing machines, test controls & measuring systems, analytical equipments and many other applications.
OUTPUT VOLTAGE : Safe computer operating output between 200 to 250 volts for input voltage from 150 to 290 volts.
Output 230, +1% for input voltage from 170 to 270 volts.
OUTPUT REGULATION: Better than 1% for input variation from 170 to 270 volts and load variation from no load to full load.
WATTAGE REQUIREMENTS OF COMPUTERS AND PERIPHERALS: PC with 14/15” monitor (300W), PC with 17” monitor (400W), Dot
matrix printer (100W), Laser printer (500 to 1000W). Inkjet / DeskJet printer (100W), Scanner (100W), Xerox machine (1500 to 2000W), Fax
machine (250W), Electronic type writer (50W).
NORMAL POWER REQUIREMENT OF APPLIANCES : Tube light - 80 watts, Fan - 135 watts, Television -200 watts, 165 Liter Refrigerator -
400 watts, Large Refrigerator - 700 watts, Geyser -2000 to 5000 watts, 1 ton AC - 2000 watts,1.5 ton AC - 2800 watts, 2 ton AC - 3400 watts,
Washing machine without heater -750 watts, washing with heater - 3000 watts.
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-2-
DIGITAL MULTIMETER
` 1200/- ` 800/-
DC VOLTAGE
Range Accuracy Resolution Overload Protect ACCESS 7A is a general purpose 3½ digit held multimeter for measurement of DC
and AC voltage, DC current and resistance. Continuity buzzer, Diode and transistor
200mV 0.1mV
hFE checking facilities are also provided.
2V ± 0.5% of 1mV
reading ±1 Fully protected
20V 10mV on all ranges
least counts DC VOLTAGE
200V 0.1V
1000V 1V Input Overload
Range Accuracy Resolution Impedance Protection
AC VOLTAGE 200mV 0.1 mV
Range Accuracy Resolution Overload Protect 2V ± 0.5% of 0.001V
200mV 0.1mV reading ± 3 Fully protected
20V 0.01V 10MW on all ranges
2V ±1 % of 1mV least counts
Fully protected 200V 0.1V
20V reading ±2 10 mV on all ranges 1000V 0.1V
least counts
200V 0.1V
750V
AC VOLTAGE (45Hz - 450Hz)
1V
Input Overload
DC CURRENT Range Accuracy Resolution Impedance Protection
Range Accuracy Resolution Overload Protect 200 V ± 1.2 % of 0.1V
9MW Fully protected
2mA 1µA reading ± 10
1V on all ranges
±1 % of 750 V least counts
20mA 10µA Fully protected
reading ±2
200mA 0.1mA on all ranges
least counts RESISTANCE
20A 10mA
Voltage across Overload
Range Accuracy Resolution
Terminal Protection
AC CURRENT
Range Accuracy Resolution Overload Protect 200Ω 0.1Ω
1mA
2KΩ ± 1.2 % of 1Ω
2mA Fully protected
±1.2 % of 20KΩ reading ± 8 10Ω < 2.8V
20mA 0.01mA Fully protected on all ranges
reading ±3 least counts
200mA least counts 0.1mA on all ranges 200KΩ 100Ω
2MΩ 1KΩ
20A 10mA
RESISTANCE DC CURRENT
Range Accuracy Resolution Overload Protect Voltage across Overload
Range Accuracy Resolution
Terminal Protection
200 ohm 0.1 ohm
2K ohm 1 ohm 2mA 0.001mA
20K ohm 10 ohm Fully protected
±1 % of 20mA ± 1 % of 0.01mA
< 0.2V on all ranges
200K ohm reading ±2 0.1K ohm 200 V DC or ACrms reading ± 2d
least counts 200mA 0.1mA
2M ohm 1K ohm
10A 10mA
20M ohm 10K ohm
200M ohm 100 K ohm POWER REQUIREMENT : 9 V battery
DISPLAY: 3 ½ Digit, 7 segment LCD type of 12.5 mm height. Polarity, over range and
CAPACITANCE low battery indications are provided.
Range Accuracy Resolution Overload Protect SIZE & WEIGHT: 126mm (L) x 72 mm (W) x 25mm (H), 108 gms. (approx)
20nF 1pF STANDARD ACCESSORIES:Battery, test lead, instruction manual and carrying box.
200nF ±4 % of 100pF Fully protected
reading ±2 on all ranges
20mF least counts 1nF
200mF 100nF
Provided with continuity buzzer, diode & transistor hFE checking & hold
facilities
POWER REQUIREMENT : 9 V Battery
DISPLAY:12.5 mm, 3 ½ digit LCD display with polarity & over range indication
INPUT IMPEDANCE:10 M Ohms in all DCV ranges.
SIZE & WEIGHT:172 mm (L) x 88 mm (W) x 36 (H), 340 gms. (approx)
STANDARD ACCESSORIES : Test leads, Instruction manual, Battery and
carrying box.
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 3-
0 to 1000 amps CAPACITANCE METER LCR METER
AC CLAMP METER
(TONG TESTER)
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-4-
4.5 DIGIT TABLE TOP FUNCTION GENERATOR SIGNAL GENERATOR
DIGITAL MULTIMETER (Triangular, Square & Sine) (SINE AND SQUARE)
4 ½ digit. True RMS Benchtop Multimeter with full features FREQUENCY RANGE: 7 decodic ranges OUTPUT WAVEFORMS:
and Overload protection. Ideal for education, service as well selectable by Range - Push Switch and Coarse Sine and square waves, simultaneously available on
as manufacturing sector. & Fine Frequency Controls with LED display for 2 separate connectors
Min. & Max. Frequency
FREQUENCY RANGE: 1 hertz to 1 mega hertz,
FUNCTION RANGE ACCURACY DISPLAY : Digital 7 segment 5 digit display for selected by continuously adjustable dial and a 6 step
frequency with LED display for Hz & KHz decade control. The dial accuracy is ± 5% ± 1O.
indication
DCV 200mV / 2V / 20V / + (0.05%+3) OUTPUT AMPLITUDE (SINE WAVE ) :
200V / 1000V WAVEFORMS : Sine, Square, Triangle & TTL 0 to 30 volts peak to peak into open circuit, selected
ACV 200mV / 2V / 20V / + (0.8%+80) pulse output Ramp and Pulse with the help of by continuously adjustable control and a 3 step
200V / 750V duty cycle / symmetry control decade control. The amplitude level is flat within ± 0.5
db over the entire frequency range (To be checked
DCA 20mA / 200mA / 2A / + (0.35%+10) OUTPUT AMPLITUDE : 20 V p/p into open with low capacitance probes and high frequency
20A circuit (10V p-p into 50 ohms) with Coarse (dB oscilloscopes).
ACA 20mA / 2A / 20A + (0.8%+80) step) and fine control
OUTPUT AMPLITUDE (SQUARE WAVE) :
Resistance 200 / 2K / 20K / 200K + (0.1%+5) ATTENUATOR : 0 to 60dB variable (2X20 dB 0 to 15 volts peak to peak into open circuit,
/ 2M / 20M step coarse attenuator and 20 dB fine control) continuously adjustable.
Capacitance 20nF / 2uF / 200uF + (3.5%+20) OUTPUT IMPEDANCE : 50 ohms & 600 ohms OUTPUT IMPEDANCE:
switch selectable 600 ohms.
Frequency 20KHz / 200KHz + (1.0%+20)
DC OFFSET : Variable upto + / - 10 V into open PROTECTION:
Diode Test YES
circuit Both outputs are short circuit protected.
Triode Test YES
DUTY CYCLE : (Ramp & Pulse) Continuously DISTORTION:
Continuity YES variable for continuous working Less than 0.5 % from 100 hertz to 100 kilo hertz.
Buzzer
FM IN : Available via external input SQUARE SYMMETRY:
Overload YES Duty cycle of square wave output is continuously
Protection MAINS ON / OFF: Rocker Switch on back adjustable from 0% to above 70%
Input 10M panel
Impedance RISE AND FALL TIME (SQUARE WAVE OUTPUT):
FUSE: Fuse for protection Less than 100 nano seconds. (To be checked with
Sampling rate 3 times / sec low capacitance probes and high frequency
POWER REQUIREMENT : 230 V + / - 10% oscilloscopes)
AC 40 ~ 50KHz volt, AC, 50 Hz
Frequency POWER REQUIREMENT: 230 volt ±10%Volt AC,
response ACCESSORIES: BNC cable, Power cord, 50Hz
Operational Manual Instruction Manual
way SIZE AND WEIGHT: 85mm (H) X 195 mm (W) x 240
mm (D), 3 KG (approx)
Max. display 19999
STANDARD ACCESSORIES: One meter long
Product 245*220*82 mm banana to crocodile test lead pair and instructions
dimension (approx) manual.
Power AC 220V /110V
Requirement 50Hz / 60Hz
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-5-
PH METER CONDUCTIVITY METER
TESTRONIX 511 ` 4500/- TESTRONIX 15 ` 4500/-
TESTRONIX 511 is useful for measurements of pH values of homogeneous electrolytic Testronix 15 is useful for measuring conductivity of
solutions. Also measures DC milli volts from 0 to ± 1999 milli volts. Useful for chemical, homogeneous electrolytic solutions.
pharmaceuticals, cosmetic, rubber industries, water treatment plants, soil testing Useful for chemical, pharmaceuticals, cosmetic, rubber
laboratories, pollution control departments, agriculture organization, R & D organizations, industries, water treatment plants, soil testing
colleges, service centers etc. laboratories, pollution control departments, agricultural
organizations, R & D organizations, colleges, service
Supplied with glass combination type of electrode, electrode stand and pH buffer solutions of centers etc.
4 & 7 pH. The buffer solutions help in easy re-calibration of the pH meter. Standardization Supplied with conductivity cell of cell constant 1, cell
(7pH) and slope (4pH) adjustment controls are provided on the front panel. stand and standard conductivity solution. Detachable
conductivity cell ensures easy replacement.
Detachable electrode ensures replacement convenience. Self check facility control on front
panel enable users to ensure that the pH meter is functioning properly. Temperature setting
on front panel provides compensation for different temperatures of solutions. RANGE: 0.01 micro siemens/cm to 199.9 milli
siemens/cm in 5 ranges of 20 micro s/cm, 200 micro s/cm,
pH RANGE: 0 to 14.00pH with resolution of 0.01 pH 2 milli s/cm, 20 milli s/cm and 200 milli s/cm.
MILLI VOLT RANGE: 0 to ±1999 mV DC with resolution of 1 mV. pH or mV measurement ACCURACY: ± 3% of range.
selection is providing with a front panel control
RE-CALIBRATION: Front panel control with the help of
ACCURACY: ± 0.04 pH for pH measurements. ± 0.2 ± 2 milli volts for milli volts standard conductivity solution supplied with the meter,
measurements helps in easy re-calibration of the conductivity meter.
TEMPERATURE COMPENSATION: 0⁰C to 100⁰C, settable with continuously adjustable DISPLAY: 3½ digit 7 segment bright LED type of 12.5
front panel control. mm height. Decimal point and over range indications are
provided.
SELF CHECK FACILITY: Available with front panel control. Display reads 7.00 ± 0.02 pH to
indicate proper functioning of the pH meter POWER REQUIREMENTS: 230 ± 10% volts AC, 50Hz
RE- CALIBRATION : Front panel preset control of STANDARDIZATION enables calibration SIZE AND WEIGHT: 85mm (H) X 195 mm (W) x 240 mm
for 7 pH. Front panel preset control of SLOPE enables calibration for 4 pH. Buffer solution of (D),3 KG
4 and 7 pH are supplied with the pH meter to re-calibrate the pH meter.
STANDARD ACCESSORIES: Conductivity cell of cell
DISPLAY: 3½ digit 7 segment bright LED type of 12.5 mm height. Decimal point, over constant 1, cell stand, standard conductivity solution and
range and negative polarity indications are provided. instruction manual
EXTRA ACCESSORIES:
Electrode : ` 750/-
Electrode stand : ` 200/-
Buffer of 4 or 7 pH : ` 200/-
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-6-
DC POWER SUPPLIES
Two tracking output voltages of equal value and opposite polarities are
OUTPUT VOLTAGES: available in dual tracking mode of operation.
The output voltage is continuously adjustable by coarse and fine controls and
displayed on 3 ½ digit, LED display of 12.5mm height with accuracy of ± 0.5% ± 2 Independent or dual tracking mode is selectable by front panel control
least counts. (Voltmeters in models 30B/ 30C/ 30D/ 92A / 92B / 92C/ 92D/ 36A/
36B/ 36C have 3 digit displays) The output voltages are continuously adjustable by coarse and fine front panel
Output voltage can be floated on any live voltage or any of the two voltage controls. Two output voltages are continuously displayed on 2 separate 3½
terminals can be grounded to get positive or negative voltage digit meters with accuracy of ± 0.5% ± 2 least counts (Meters have 3 digits in
model 93C). Meters have LED displays of 12.5mm height.
LOAD CURRENT:
Load current is displayed on 3½ digit, LED display of 12.5 mm height with Output voltages can be floated on any live voltage or any of the terminals of the
accuracy pF ± 0.5% ± 2 least counts. (Current meter in models 30C/ 34C/ 36C output voltage can be grounded to get positive or negative voltages.
have 3 digit displays). Maximum value of output current can be limited from less
than 10% to 100% of the capacity by continuously adjustable coarse and fine LOAD CURRENT:
controls. Load currents of both the outputs are displayed on two separate 3 ½ digit
meters with accuracy of ± 0.5% ± 2 least counts (meters have 3 digits in model
PROTECTION: 93C). Meters have LED type of displays of 12.5mm height. Maximum values of
Short circuit and overload protected. Constant voltage constant current type of output currents can be limited from less than 10% to 100% of full capacity by
regulation provides constant voltage if load current is less than current limit continuously adjustable coarse and fine controls.
setting. If load tries to draw more current than the value of current limit setting,
current becomes constant at the limit setting and output voltage comes down to PROTECTION:
limit the current at the limit setting value. Short circuit and overload protected. Constant voltage, constant current type
of regulation provides constant voltage if load current is less than the current
REGULATION: ± 0.05% from no load to full load and for ± 10% variations in input limit setting. If load tries to draw more current than the value of current limit
mains voltage. setting, current becomes constant at the limit setting and output voltage comes
down to limit the current at the current limit setting value.
RIPPLES: Less than 3 milli volts rms.
REGULATION:± 0.05% from no load to full load and for ± 10% variations in
POWER REQUIREMENTS: 230 ± 10% volts AC, 50Hz. Power consumption is input mains voltage.
1.5 times multiple of maximum voltage rating and load current drawn
RIPPLES: Less than 3 milli volts rms.
SIZE AND WEIGHT (approx):
125 mm (H) x 125 mm (W) x 270 mm (D), 3.5 KG for 30B/ 30C/ 34B/ 92A POWER REQUIREMENTS: 230 ± 10% volts AC, 50Hz. Power consumption
135 mm (H) x 195 mm (W) x 270 mm (D), 5 KG for 30D/ 34C/ 92B/ 36A/ 36B is 1.5 times the multiple of maximum voltage rating with the sum of the load
135 mm (H) x 360 mm (W) x 270 mm (D), 9.5 KG for 34D/ 92C currents drawn.
225 mm (H) X 225 mm (W) x 300 mm (D), 14 KG for 92D/ 36C
SIZE AND WEIGHT(approx):
STANDARD ACCESSORIES: Test leads and instruction manual. 175 mm (H) x 245 mm (W) x 270 mm (D), 5 KG for 35B
255 mm (H) x 255 mm (W) x 300 mm (D), 9.5 KG for 93B.
255 mm (H) x 255 mm (W) x 300 mm (D), 13.5 KG for 93C.
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-7-
DIGITAL MICRO-OHM METER HIGH VOLTAGE BREAKDOWN
(CONTACT RESISTANCE METER) TESTERS
(RESISTANCE METER) (FLASH TESTERS)
(MILLI-OHM METER)
ACCESS 53C is suitable for measurements of resistence of cables, wires, ACCESS High Voltage Breakdown Testers are useful for checking breakdown
transformers*, motor windings**, coils and contact resistance of switches, (flash –over) voltages of motors, transformers, pumps, chokes, coils, switches,
connectors, relays and track resistance of PCB etc. connectors, plastics, rubbers, PCB's, insulation materials, electrical and
electronic components etc.
The value of resistance is displayed on 7 segment LED display. Four terminal
measurement system provides measurements free form errors due to contact Automatic tripping facility, HT ON and HT OFF visual indications, HT ON
resistance and test lead resistances. buzzer, high voltage safely probe with push button enable feature, provide
operator's safety. HT voltage and leakage current meters provide continuous
RANGE : reading, simultaneously.
1micro ohms to 19.99 K ohm in 8 full scale ranges of 1999 micro ohms, 19.99
milli ohms, 199.9 milli ohms, 1999 milli ohms, 19.99 ohms, 199.9 ohms, 1999 TEST VOLTAGE:
ohms and 19.99 K ohms. 0 to 5 KV AC in ACCESS 214 and ACCESS 214A
0 to 10 KV AC in ACCESS 215
RESOLUTION :
1 micro ohm in 1999 micro ohms range
0.01 milli ohm in 19.99 milli ohms range Test voltage is displayed on wide view moving coil type of panel meter.
0.1 milli ohm in 199.9 milli ohms range Reading accuracy is within ± 5%.
1 milli ohm in 1999 milli ohms range
0.01 ohm in 19.99 ohms range TRIPPING CURRENT LEVELS :
0.1 ohm in 199.9 ohms range 0 to 30 mA in ACCESS 214 and ACCESS 215
1 ohm in 1999 ohms range 0 to 100 mA in ACCESS 214A
0.01 k ohms in 19.99 k ohms range.
Tripping current levels can be set from 0 to maximum by front panel control.
ACCURACY :
± 0.2 % ± 2 least counts in all ranges except ± 0.5% ± 3 least counts in 200 milli Actual value of leakage current is displayed on wide view moving coil type of
ohms, 20milli ohms and 2000 micro ohms ranges. panel meter. Reading accuracy is within ± 5%
TEST CURRENT : SAFETY FEATURES :
1 Amp DC in 1999 micro ohms, 19.99 milli ohms, 199.9 milli ohms and 1999 Whenever mains supply of the high voltage tester is turned ON, high voltage
milli ohms ranges. remains OFF and is enabled only when push button is on, safety probe is kept
0.1 Amp DC in 19.99 ohms range pressed and only when actual value of leakage current is less than the tripping
10 milli Amp DC in 199.9 ohm range current level setting .
1 milli Amp DC in 1999 ohms range
0.1 milli Amp DC in 19.99 K ohms range . HT on indication glows and buzzer sounds when high voltage is ON.
Acrylic probe with safety skirt keeps operator's hand away from high voltage.
DISPLAY : Once high voltage is tripped, the same remains off until push button of the high
3 ½ digit 7 segment LED display with over range indication. In over range voltage is released and pressed again.
condition, 1 appears in the left display and the remaining 3 displays are turned
off. POWER REQUIREMENTS :
230 volts AC, ±10 %, 50Hz
POWER REQUIREMENTS : 200 VA in ACCESS 214, 400 VA in ACCESS 215 and 600 VA in ACCESS 214A
230 volts AC ± 10 %, 50 Hz
SIZE AND WEIGHT :
CABINET SIZE AND WEIGHT: 200 mm (H) × 250 mm (W) × 290mm (D), 12, 14 and 15 KGs for ACCESS 214,
85mm (H) x 195 mm (W) x 240 mm (D), 4 KG ACCESS 215 and ACCESS 214A respectively.
STANDARD ACCESSORIES: 2 pairs banana to crocodile test leads and STANDARD ACCESSORIES : Instruction manual .
instruction manual.
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-8-
TACHO METER (RPM METER)
ACCESS 81 is useful for measurements of RPM of motors, mixers, pumps, fans, etc. and surface speeds of conveyor belts etc.
Useful for industries, railways, electricity boards, defence establishments, R & D organizations, communication centers,
laboratories, colleges.
Accuracy of ±0.05% ±1 digit. Sampling rate of 1 sample per second. Quartz crystal controlled time base provides high accuracy.
Auto ranging micro controller based.
5 digit bright LED display of 10 mm height with 5 digit bright LED display of 10 mm height with 5 digit bright LED display of 12.5 mm height.
memories of last, highest and lowest reading. memories of last, highest and lowest reading.
60 to 50000 RPM. Auto-ranging.
60 to 50000 RPM from rotational speeds, auto 60 to 100000 RPM. Auto –ranging.
ranging. Resolution: 0.1 RPM from 60 to 1000 RESOLUTION: 0.1 RPM for 60 to 1000 RPM
RPM and 1 RPM from 1000 to 50000 RPM. RESOLUTION: 0.1 RPM for 60 to 1000 RPM and 1 RPM from 1000 to 50000 RPM.
and 1 RPM from 1000 to 100000 RPM.
6 to 5000 MPM (meters per minute) for surface PNP type proximity sensor of 70 mm length and
speed with resolution of 0.1 RPM. Measuring rang is from 4 inches to 12 inches. 18 mm diameter with lock nut.
The sensor should be mounted with front plane
POWER REQUIREMENT: Battery operation with POWER REQUIREMENT: Battery operation at a distance of 3 to 5 mm from a M.S. bolt,
4 pen cells of 1.5 volts. with 4 pen cells of 1.5 volts. teeth, pulsor disc or wheel (which is
Auto power off facility provided to help conserve Auto power off facility provided to help concentrically mounted on the rotating shaft of
cell life. conserve cell life. rotor or drive) rotating shaft.
SIZE & WEIGHT: 40mm (H) x75 (W) x 200 mm SIZE & WEIGHT: 40mm (H) x75 (W) x 200 mm 2 3 0 ± 1 0 % v o l t s A C , 5 0 H z , 4 VA .
(L), 330gms. (L), 280gms.
SIZE & WEIGHT: 48 mm (H) x 96 mm (W) x 120
Supplied with instruction manual, plastic carrying Supplied with photo reflective tape of 1000 x mm (D), 500gms.
case, conical type male rubber tip, hollowed 12mm, instruction manual and padded plastic
funnel type female contact tip and disc type carrying case Supplied with proximity sensor, instruction
peripheral rubber wheel for surface speed manual and panel mounting hardware
measurements
OPTION: OPTION:
ACCESS 81C & BA ` 1800/- ACCESS 81N & BA ` 1800/-
ACCESS 81C as above with battery adaptor for ACCESS 81N as above with battery adaptor
mains 230 ±10 % volts AC, 50Hz operation for mains 230 ±10 % volts AC, 50Hz operation
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
-9-
LUX METER ANEMOMETER SOUND LEVEL METER
(LIGHT INTENSITY METER) (AIR VELOCITY) (NOISE LEVEL METER)
ACCESS Lx101 ` 2000/- ACCESS AM4201A ` 6000/- ACCESS SL 4010 ` 6000/-
ACCESS Lx101 Digital Lux meter is a precise ACCESS AM4201A measures air velocity in m / sec , ACCESS SL4010 The sound level meter is an instrument
instrument for environmental test, used for km / hr, ft/sec, and knots. Digital Anemometer is a wing used to measure the ambient sound level such as sound
measuring the luminance of different location type device for wind speed, airflow and gas direction level around factories, workshops, schools, residential,
speed measuring. Measuring of such kind parameters offices, road audio etc. It also can be appropriate for noise
Lux meter have following feature: are urgent for ventilation system engineering and engineering, product quality control, health prevention
Automatic switching of measuring range, centralized conditioning on manufacturing firms, in and treatment etc
quick & convenient. Holding for maximum such cases anemometers are indispensable
measured value. Automatic reset when no The sound level meter have following features such as:
signal is input automatic shut off after 10 Anemometer have following features: measures from 30 to 130 dB and have automatic shifting
minutes of non-operation state. Large LCD Data hold function, with back light for easy reading, low function, A & C weighting network selection, high speed
screen, convenient for data reading battery indication, over range indication. (FAST) / Low speed (SLOW) response rate selection,
Maximum (MAX) locking function.
RANGE, RESOLUTION AND ACCURACY AIR VELOCITY RANGE AND ACCURACY :
0.40 to 30.00 meters /second with accuracy of +/- 2% RANGE, RESOLUTION AND ACCURACY :
Measuring Res. Accuracy
1.4 to 108.0 km/hr with accuracy of ± 2% 30 dB to 130 dB in 6 gear levels of 30 to 80 dB, 40 to 90
Range
2 to 98.5 ft/sec with accuracy of ±2% dB, 50 to 100 dB, 60 to 110 dB, 70 to 120 dB, & 80 – 130
0.1-200.0 0.1 +3% rdg +3 Lux 0.8 to 58.0 knots with accuracy of ±2% dB. Resolution of dB measurement is 0.1 dB. Accuracy is
200-2000 1 +2% rdg +2 Lux within + 2 %
DATA HOLD FACILITY : Data hold facility is provided to
2000-20000 10 +3% rdg +8 Lux
store the desired value on display. FREQUENCY RANGE : 30Hz ~ 8KHz
Displayed value
multiplied by 10
DISPLAY : 3½ digit, 1999 count LCD display of 20 mm DIGITAL DISPLAY : 4 digit, LCD Display of 12 mm
20000-50000 100 +4% rdg +10 height. Back light and measurement units are provided. height, resolution: 0.1 dB, sampling rate: 2 times/sec.
Displayed value Lux
multiplied by 10 POWER REQUIREMENTS : 9 volts battery. ANALOG BAR DISPLAY: Each analog bar represents 1
Over 50000 100 Reading is for dB, sampling rate is 20 times/sec.
Displayed value reference only SIZE AND WEIGHT : 185 mm (L) x 74 mm (W) x 33
multiplied by 100 mm (H), 360gms (approx) OPERATING TEMPERATURE: 0 to 40OC
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 10 -
SOLDERING & DESOLDERING STATIONS
SOLDERING STATION DESOLDERING GUN SOLDERING & DESOLDERING
(Digital Desoldering Station) STATION
Super-quick heat-up and faster thermal recovery The Desoldering Gun (Digital Desoldering Station) is The Soldering & Desoldering Station is a high
for high quality soldering at lower tip temperature. a high performance design specially for lead free performance and multi-function station for electronic
desoldering. The quick heating & strong power are product research, production and rework. The
Built-in ceramic heater sensor maintains very useful for desoldering of normal & all types of soldering iron and the desoldering gun tool are
temperature within ±0.5°C (±0.9°F) of the setting. DIP components. Sturdy structure, strong absorbing controlled automatically by micro-processors. The
power, Ceramic Heater & ease of operation even by digital control electronics and high-quality sensor
Heat-insulated soldering iron grip for greater single hand and can easily remove the residual and heat exchange system guarantee precise
operator comfort. solder from one sided or two sided PCB (PTH). temperature control at the soldering tip.
Microprocessor Controlled desoldering temperature The highest degree of temperature precision and
SAFE TO OPERATE, PROTECTS FRAGILE with digital display. optimal dynamic thermal behaviour under load
CIRCUITRY conditions is obtained by the quick and accurate
936,incorporates a number of features to enhance SPECIFICATIONS recording of the measured values in a closed control
operator safely and protect fragile circuitry. The circuit, and this design is especially for the lead-free
soldering Iron outputs a low 24 volts, and is Station production techniques.
completely isolated from the AC line by an Power Supply : 110-130V AC /220-240 V AC The high power and slim design makes this iron
insulated transformer. The soldering tip itself is Power Consumption : 80W suitable for fine soldering work. The heating element
directly grounded, and a full-wave, zero-crossing Vacuum Pressure : 600mm Hg is made of PTC and the sensor on the soldering tip
switch system is used to turn the heating element Function display : LCD can control the soldering temperature quickly and
on and off. accurately. The high power and gun type design
DeSoldering Gun makes this iron gun suitable for fine desoldering
TEMPERATURE RANGE : 200°C(400°F) - 480°C Voltage : 24V AC work. The heating element is made of PTC and the
(899°F). Power : 80W sensor on the desoldering tip can control the
Temperature : 180 OC to 480 OC Heating desoldering temperature quickly and accurately.
ELECTRONICS CONTROL SYSTEM : Element : Ceramic heater
EMI 936 reaches a temp. of 480°C within a span of SPECIFICATIONS
75 secs.
Station
INSULATION RESISTANCE : 300 M (400°C, Power Supply : 110-130V AC /220-240 V AC
750°F) Power Consumption : 60W + 80W
Main fuse : 3.15A
LEAK VOLTAGE : Under 0.6m V (between tip and Function display : LCD
ground).
Soldering Iron
POWER CONSUMPTION : Output: Station: Voltage : 24V AC
24V/60W, Iron: 24V/50W, Input : 230V ± 10%. Power : 60 W heat up rating 130W
Temperature : 60 deg C to 480 deg C
OUTER DIMENSIONS : Soldering Iron (total Heating Element : Ceramic heater
length) 900m :190mm, 7.4 in (without cord) Control
Station: 125 x120x200 mm 4.9x4.7x8.1 In (without DeSoldering Gun
cord and Iron Stand). Voltage : 24V AC
Power : 80W
WEIGHT / (APPROX) : Soldering Iron: (without Temperature : 160 deg C to 480 deg C
cord): 45 gms. Control Station: (without cord and Vacuum Pressure : 600 mm HG
Iron Stand): 1500 gms.
FEATURES SPECIFICATION
l ESD SAFE Power Consumption : 270 W
SMD REWORK STATION l Standard, General Purpose, Proven, Rugged,
Economical & Very Popular Model
Temperature Range :100 ºC ~ 420 ºC
Air Flow : 24 L / Minute (max.)
- SMD SOL & l A perfect combination of the Very Popular, Well Controls : a. Power On / Off
Proven 850 Series Models and other stations b. Air
DESOL STATION l Powerful starting, Rapid Heating c. Heater
l Air Volume Linear Adjustable Operation : 220 V AC Mains, 50 Hz
ACCESS 850A ` 5000/- l Suitable for QFP & SOP I.C.s Dimension: 187 x 135 x 245 mm
l Various types of Nozzles available for different Weight : 4 Kg. Approx
application Accessories : Nozzles ( 2nos)
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 11 -
DIGITAL IC TESTER THERMOMETER TEMPERATURE CUM
(NON CONTACT TYPE WITH LASER BEAM) HUMIDITY METER
(HYGRO-THERMOMETER-CLOCK)
ACCESS DIT24 ` 7500/- ACCESS 8811A ` 5000/-
ACCESS TH ` 1500/-
ACCESS DIT 24 is a hand held tester, designed to ACCESS 8811A measures temperature without any ACCESS TH measures minimum, maximum and
test over 300+ Digital Logic IC's commonly used in contact with the objects. The laser beam is pointed on real time values of room temperature and
industry. It is ideal for incoming inspection at the objects. The reflected beam is sensed by the infrared humidity.
manufacturer's end, troubleshooting at maintenance sensor for measure-ment of temperatures.
depots, repair shops or in field service and education ACCESS TH also displays time in hours and
in ITI's, Polytechnics & Engineering colleges ACCESS 8811A is useful for in process temperature minutes in 12 and 24 hours formats. Tempera-ture
measure-ments, safety ans fire inspections, marines, unit ºC / ºF changeable. Memory of max./ min.
l Tests TTL family of ICs 74xx (commercial screen printings, diesels and fleet maintenance, value of temperature & humidity. Clock & date
grade) & 54xx (military graed) (LS/HC/ HCT/ ALS/ measurements of temperature of links, screen printings, display function, automatic exchanging in 5
S / AS / F /.. ) dryers, plastic moldings, asphalts, food reparations, seconds between clock & date, hourly & everyday
l Tests CMOS family of ICs - 40xx, 41xx, 45xx diesels, marine, safety and fire inspections, etc. alarm function.
l AUTO FIND DEVICE - Conducts exhaustive
FUNCTION : Displays real time, maximum and minimum RANGE
functional tests & finds out of the number of
readings of the temperatures in °C and °F, selection by Temp. : -10ºC to +50ºC (+14 ºF to + 122ºF)
an unknown device ( TTL & CMOS)
front panel control. Humidity : 20% to 99% RH
l Alphanumeric LCD display shows IC number, Test (When the humidity < 20% RH, Display 10% RH
Passed / Test Failed and other status messages RANGE , RESOLUTION AND ACCURACY : directly)
l 24Pin Universal ZIF socket accommodates Range : -50.0 to +580°C / -58 to +1022°F.
both 0.3'' and 0.6'' DIP ICs & audible alarm Accuracy : 100°C + 2% / 100°C +2°C TEMPERATURE DISPLAY : 3½ digit, 7
l STANDARD ACCESSORIES : Instruction manual, Resolution : 0.1°C or 0.1°F segments, LCD type of 26 mm height. Decimal
9V PP3 Battery & 9V, 750mA DC Adapter point%, ºF and ºC displays are provided.
AUTOMATIC DATA HOLD : The data hold facility
DIGITAL INSULATION freezes the last temperature reading on the display. HUMIDITY DISPLAY : 2 digit, 7 segment LCD type
of 26mm height.
With ter
TESTER (Megger) Multim
e
DISTANCE FACTOR (Distance to spot ratio): Farther
the target, large the test spot area, it means: As the TIME DISPLAY : 4 digit.7 segment LCD type of
ACCESS DITM 910 ` 4000/- distance from thermometer to the object increases spot 22mm height. AM, PM and alarm displays are
size of measuring area becomes larger it is named as provided.
"D:S" (Distance Spot Ratio) for example, if 16:1, the
efficient testing distance should be 16 times as the POWER REQUIREMENTS : 1.5 volts, size
diameter of the target object. Make sure the target is AAA cell.
larger that the spot size. Smaller the target, closer
measuring distance needs. SIZE AND WEIGHT :
105mm(L) x 98 mm(W) x 21mm (H).105gms
DISPLAY : 3 digit, 7 segment, LCD type of 12.5mm (approx).
height with back lighting facility. Negative polarity, °C, °F, Foldaway stand help place unit on table at
3 3/4 Digit (Max Display :3999) LCD backlit large low battery and laser icon displays are provided. convenient viewing angle. Wall mounting key hole
display with overload protection Displays the related info according to your setting such helps in mounting the unit on wall.
as:-
MEASUREMENT VOLTAGE : 250V / 500V / 1000V High temp. alarm, low temp. alarm, max. measure, min. STANDARD ACCESSORIES : 1.5 volts cell and
INSULATION RESISTANCE : 0.25MW ~ 40GW measure, Average measure, Difference measure, instruction manual.
emissivity.
ACCURACY : 400kW ~ 200MW ±3%±5,200M ~
4GW ±5% ±5,4G-40GW ±10%± 5 POWER REQUIREMENTS : 9 volts alkaline battery.
SHORT CIRCUIT CURRENT : 1.5mA or more Auto power off (after 15 seconds) facility helps to
MEASUREMENT TIME : 1 / 2 /10 Minutes conserve battery life.
Multimeter
ACV : 4/40/400V±0.8%±5,700V±1%±5 OPERATING TEMPERATURE : 0 to 50°C (32 to 122°F)
DCV : 400m/4/40/400±0.5%±5,1000V±0.8%±5
DCA : 40 mA/400mA±0.8%± 5 SIZE AND WEIGHT : 170 mm (L) x 125 mm (W) x 46 mm
ACA : 40 mA/400mA±1%±5 (H). 230 grams. (approx)
RESISTANCE : 400/4k/40k/400kW ±0.8% ±5, 4MW
±1% ±3, 40MW ±3%±3 STANDARD ACCESSORIES : 9volts battery,
CAPACITOR : 40n/400n/4u/40 uF±3%±5 instruction manual and carrying cover.
FREQUENCY : 40/400/4 k /40 k /400 k /4MHz
±0.5% ±3
Buzzer for Continuity/ Diode Test
SIZE AND WEIGHT : 156 mm (L) x 64 mm (W) x
170 mm (H). 650 grams. (approx)
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 12 -
TEMPERATURE CALIBRATORS & SIMULATORS
SE4024 ` 4500/- SE4004 ` 3500/- SE401 ` 3500/- SE405 ` 4500/- SE406 ` 6000/-
Accuracy ± 0.05% ± 2 digit for 200mV +0.05% +2 digit +0.05% +2 digit for mV +0.05% +2 digit for mV +0.05% +2 digit for mV
±0.1% ±2 digit for 2V & 20V +0.25% +1 digit for PT- /mA / mA /
± 0.25% ± 2 digits for 100 RTD +0.25% +2 digit for +0.25% +2 digit for PT-
current ranges PT-100 RTD 100 RTD
Size & Weight 80 mm(H)x180 mm (W) 50 mm(H)x90 mm (W) x 175 mm(D), 500 gms (approx)
x200 mm(D), 3 Kgs (approx)
Standard Test leads, Instruction Test leads, Battery, Instruction Manual & Carrying Cover
Accessories Manual
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 13 -
TEMPERATURE INDICATORS (THERMOMETERS)
(Contact type, hand held, 3.5 Digit LCD battery operated)
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 14 -
TEMPERATURE INDICATORS & CONTROLLERS
(3½ Digit LED display, Panel mounting, Mains operated)
TEMPERATURE INDICATORS TEMPERATURE CONTROLLERS CUM INDICATORS
(One set point-potentiometric setting) (Two set point (Hi & Low)-potentiometric setting)
similar to series SE-200 but with two set points
0 to +1200OC, Thermocouple type 0 to +1200OC, Thermocouple type 0 to +1200OC, Thermocouple type
SE221K ` 700/- SE200K ` 850/- SE202K ` 1200/-
-100 to +200OC, RTD type 0 to +200OC, RTD type 0 to +200OC, RTD type
SE221RTD200 ` 700/- SE200RTD200 ` 850/- SE202RTD200 ` 1200/-
-100 to +400OC, RTD type 0 to +400OC, RTD type 0 to +400OC, RTD type
SE221RTD400 ` 700/- SE200RTD400 ` 850/- SE202RTD400 ` 1200/-
ACCURACY : 1) ± 0.5% of range ± 1°C upto ACCURACY : 1) ± 0.5% of range ± 1 °C upto Straight type K (Cr-Al) thermocouple sensor in 6 inch
1000 °C. 1000 °C. long stainless steel sheathing of 6mm diameter and 2
2) ±1% of range ± 2°C above 1000°C. 2) ±1% of range ± 2°C above 1000°C. meter long fibre stainless steel braided thermocouple
All indicators have automatic room temp. All controllers have automatic room cable. Suitable from 0 to 600°C. Suitable for SE-221-K
compensation. temperature compensation. and SE-200-K and SE-202-K.
RTD types of indicators have 3 wire systems for RTD type controllers have 3 wire systems for
automatic compensation of sensor cable automatic compensation of sensor cable IMMERSION PROBE TYPE: TC23K1 ` 1200/-
effects. effects.
DISPLAY : 3 ½ digit, 7 segment bright LED type CONTROL ACTION : ON/OFF with accuracy Immersion type K (Cr-Al) thermocouple sensor with
of 12.5mm height. Decimal point, over-range of ± 1°C. 1 N.O. and 1 N.C. relay contacts of aluminum head. Having 12 inch long inconnel sheathing
and negative polarity indications are provided. contact rating 5Amps, 230VAC for resistance of 6mm diameter and 1 meter long PVC compensating
Open sensors indicates 1 in most significant load. cable suitable from 0 to 1200°C. Suitable for SE-221-K
digit and blanks for the remaining 3 digits. and SE-200-K and SE-202-K.
DISPLAY : 3% digit, 7 segment bright LED type
POWER REQUIREMENTS : 230 ± 10% volts of 12.5mm height. Decimal point, over-range IMMERSION PROBE TYPE: TC21K1 ` 400/-
AC, 50Hz. and negative polarity indications are provided.
Open sensors indications 1 in most significant
SIZE, PANEL CUTOUT AND WEIGHT : 48mm digit and blanks for the remaining 3 digits. Immersion type K (Cr-Al) thermocouple sensor with
(H) x 96mm (W) x 110mm(D) with panel cutout of aluminum head. Having 12 inch long stainless steel
46mm (H) x 92mm (W), 400gms (approx) POWER REQUIREMENTS : 230 ± 10% volts sheathing of 6mm diameter and 1 meter long PVC
AC, 50Hz. compensating cable suitable from 0 to 600°C. Suitable
STANDARD ACCESSORIES : for SE-221-K and SE-200-K and SE-202-K.
Instruction manual and panel mounting SIZE AND WEIGHT :
brackets. 96mm (H) x 96mm (W) x 110nnnn(D) with panel IMMERSION PROBE TYPE: RTD54 ` 500/-
cutout of 92mm (H) x 92mm (W), 600gms.
SENSORS : Available at extra charge. Details (approx)
are given in column on right hand side. Immersion type RTD (PT100) sensor with head.
STANDARD ACCESSORIES : Instruction Having 12 inch long stainless steel sheathing of 6mm
manual and panel mounting brackets. diameter and 1 meter long cable. Suitable from - 100
to +400 °C. Suitable for SE-221-RTD 200 /400.
SENSORS : Available at extra charge. Details
are given in column on right hand STRAIGHT PROBE TYPE: RTD53 ` 400/-
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 15 -
AC MULTIFUNCTION (mC BASED) DIGITAL PANEL METER
1 ph True rms 1 ph True rms 3 ph True rms 3 ph True rms
AC Volt (V) meter AC Current (I) meter AC Volt (V) meter AC Current (I) meter
ACCESS 101 ` 625/- ACCESS 111 ` 680/- ACCESS 103 ` 950/- ACCESS 113 ` 1100/-
Model 131 (1f – 2 wire) 301 (1f – 2 wire) 201 (1f – 2 wire)
Features:
133 (3 f - 3 f / 4Wire) 303 (3 f - 3 f / 4Wire) 203 (3 f - 3 f / 4Wire) ABS plastic moulded.
Parameters V, I, F, pF, Power (Ac,R V, I, pF, P (Ac,R) (Ind. / Active Energy, V, I, F, pF CTs are ultrasonically welded & unbreakable.
(Scrol / &Ap), THDV, THDI, Avg.), F, Load hour, RPM (ph wise), Power (Ac,R & Easy bus bar mounting.
Selectable) Energy, Load Hours Ap),THDV,THDI,Load Hour Apertures accepts wide range of buss bar sizes as primary.
Finger touch proof terminals for safety.
Measurement 500 V / 5A / 45-65 Hz 500 V / 5A / 45-65 Hz 500 V / 5A / 45-65 Hz Highly cost effective.
(Auto Ranging) Compact in size.
Resolution Energy 0.1 kwh 0.1 Hz for frequency Energy 0.1 kwh
Power factor: 0.001 (Auto Ranging for other Power factor: 0.001 Ordering Code Ratio Class Burden Unit Rate
Frequency: 0.01 Hz parameters) Frequency: 0.01 Hz ACCESS (VA) (`)
V, I & Power: Autoranging V, I & Power: Autoranging CTM 30/5 30/5 3 1 290/-
Accuracy Voltage ±0.5% of F.S. Voltage ±1% of F.S. Voltage ±0.5% of F.S.
CTM 50/5 50/5 3 1 290/-
Current ±0.5% of F.S. Current ±1% of F.S. Power factor ±0.5%
P.F. ±0.5% of F.S. Power (Active & Frequency ±0.1% CTM 60/5 60/5 3 1 290/-
Frequency ±0.1% of F.S. Apparent) ±1% of F.S. Power(Active, Reactive &
Power(Active,Reactive & Frequency 0.1% of F.S. Apparent): 1% CTM 75/5 75/5 3 1 290/-
Apparent):1% for deflection Energy (Active, reactive
Energy Active Class 1 Power Factor ±2 for and Apparent): Class 1 CTM 80/5 80/5 3 1 290/-
electrical degrees CTM 100/5 100/5 1 1 290/-
PT or CT Ratio PT : upto 132 KV CT : P:1/5 to 1000/5000A CT : S : 1/5A
Programmable (Burden 0.2VA max per input) CTM 120/5 120/5 1 1 290/-
Display 1row, 4 digit, 7-segment 3rows, 3 digit, 7-segment 2rows, 7-segment Ultra CTM 150/5 150/5 1 1 290/-
Ultra Bright LED, Ultra Bright LED, Bright LED, H=9.9mm CTM 200/5 200/5 1 2.5 290/-
H=14.3mm H=14.3mm 1st row of 8digit for Energy
2nd row of 4 digit for other CTM 250/5 250/5 1 2.5 290/-
parameters
CTM 300/5 300/5 1 2.5 290/-
Aux Supply 90V to 270V AC/DC ; 50/60 Hz
Size 96mm x 96mm (Cutout : 92mm x 92mm) CTM 400/5 400/5 1 5 290/-
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 16 -
DIGITAL METERS
DIGITAL PANEL METERS DIGITAL PORTABLE METER
(V, A and Line frequency) ACCESS 34P ` 900/-
3 ½ Digit 7 segment LED DPM
ACCESS 34A DC ` 600/-
ACCESS 34A AC ` 650/-
FOR MEASUREMENTS OF : 34P portable are available for DC voltage, AC voltage DC current and AC
DC milli-Volts/ DC Volts current measurements.
DC micro-amps / milli-amps /amps /kilo amps.
AC milli-Volts /Volts /Line (mains) voltages /Voltages of H.T. transformers. 34P portable meters are highly accurate with high resolution and provide
AC micro-amps /milli-amps /amps /Kilo amps. parallax free readings and do not get damaged in dusty environments.
Process parameters measurements using transducers of 0 to10 VDC outputs.
34P have longer life as they do not have moving and fragile parts and are
MECHANICAL DATA: housed in power coated-steel cabinet providing convenient viewing angle.
Panel cutout size of 46 mm (H) x 92 mm(W) with cabinet size of 48 mm (H) x96mm
(W) x 110mm(D). Panel mounting hardware is supplied with the panel meters. Useful for colleges, laboratories, R&D organizations, industries, railways,
WEIGHT : 0.4kgs defense establishments etc.
DISPLAY: 31/2 digit in model 34A_except 4 digit in Line Frequency Meter. 7
segment, LED type of 13 mm height. Decimal point, negative polarity and over- DISPLAY: 3 ½ digit, LED type of 13 mm height. Over-range and negative
range indications are provided. polarity indications and auto-zero facilities are provided.
RESOLUTION: 1in ± 1999 except, 1 in 9999 in 34A81 (High resolutions of
digital meters make them up to 100 time more accurate than analog meter.) NMRR: 40 db for DC and AC at 50 Hertz.
NMRR: 40 db for DC measurements or AC measurements at 50 Hz.
SAMPLING RATE: 2.5 sample /second POWER REQUIREMENTS: 230±10% v AC, 50Hz
AUX SUPPLY: 230± 10% volts AC, 50Hz, 1 Phase AC Mains
SIZE AND WEIGHT :
DC mV /DC V MEASUREMENTS 100mm (H) x 200mm (W) x 100mm (D). 0.6 kgs (approx)
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 17 -
LCR DECADE BOXES RHEOSTATS
ACCESS RA series
ACCESS LCR Decade Boxes are light weight table ACCESS 20R10 20 ohms, 10 Amps 560 x 90 4.5 ` 4,300/-
top instruments for obtaining precision values of
resistors, capacitors and inductors. High quality ACCESS 10R10A 10 ohms, 10 Amps 467 x 76 3.2 ` 2,500/-
ceramic encased wire wound and sputtered metal ACCESS 4R10A 4 ohms, 10 Amps 305 x 50 1.2 ` 1,250/-
film resistors, metalized polyester and polystyrene ACCESS 1.25R10A 1.25 ohms, 10 Amps 152 x 35 0.6 ` 800/-
capacitors and high stability pot cores inductors,
provide high performance. Special quality switches ACCESS 100R5A 100 ohms, 5 Amps 560 x 100 5 ` 4,050/-
ensure low contact resistance and smooth
operations. ACCESS 60R5A 60 ohms, 5 Amps 455 x 90 4 ` 2,700/-
ACCESS 25R5A 25 ohms, 5 Amps 360 x 50 1.5 ` 1,450/-
RESISTANCE DECADE BOXES ACCESS 12R5A 12 ohms, 5 Amps 305 x 35 1 ` 900/-
RANGE: 1 ohm to 1.111111 mega ohms in 6
decades in ACCESS RDB6 ACCESS 5R5A 5 ohms, 5 Amps 152 x 35 0.5 ` 750/-
ACCURACY: ± 1% ± 0.5 ohms
WATTAGE: 3 Watts for values below 10 ohms, ½ ACCESS 500R2A 500 ohms, 2 Amps 560 x 90 5 ` 2,900/-
watt from 10 ohms to 1 kilo ohms and ¼ watts for ACCESS 200R2A 200 ohms, 2 Amps 380 x 76 2.2 ` 1,900/-
values more than 1 kilo ohms. ACCESS 100R2A 100 ohms, 2 Amps 305 x 50 1.2 ` 1,150/-
PROTECTION: Fuse protection of 100 mA.
ACCESS 45R2A 45 ohms, 2 Amps 228 x 35 0.6 ` 850/-
CAPACITANCE DECADE BOX
RANGE : 10 Pico Farads to 11.11111 micro farads in ACCESS 2.5KR1A 2.5 Kohms, 1 Amps 560 x 100 4.5 ` 3,250/-
6 decades in ACCESS CDB6 ACCESS 1KR1A 1 Kohms, 1 Amps 407 x 78 2.2 ` 1,850/-
ACCURACY: ± 1%± 50 Pico farads . ACCESS 600R1A 600 ohms, 1 Amps 360 x 50 1.2 ` 1,300/-
MAXIMUM WORKING VOLTAGE: 100 Volts DC or
63 Volts AC ACCESS 300R1A 300 ohms, 1 Amps 305 x 35 0.8 ` 800/-
ACCESS 125R1A 125 ohms, 1 Amps 152 x 35 0.5 ` 750/-
INDUCTANCE DECADE BOX
RANGE : 10 micro Henry to 11.11111 Henry in 6 ACCESS 25KR.3A 25 Kohms, 0.3 Amps 560 x 100 4.5 ` 4,950/-
decades in ACCESS LDB6 ACCESS 10KR.3A 10 Kohms, 0.3 Amps 407 x 76 2.2 ` 2,400/-
ACCURACY: ± 2 % 5 micro Henry
PROTECTION : fuse protection of 500 mA. ACCESS 4.5KR.3A 4.5 Kohms, 0.3 Amps 305 x 50 1.2 ` 1,150/-
CABINET SIZE ACCESSORIES: 290mm (H) x 110 ACCESS 2KR.3A 2 Kohms, 0.3 Amps 228 x 35 0.6 ` 750/-
mm 9 (W) X 80 mm (D), 1.2 KG (approx) ACCESS 1.3KR.3A 1.3 Kohms, 0.3 Amps 152 x 35 0.5 ` 700/-
STANDARD ACCESSORIES : Banana to crocodile
1 meter long test lead pair. As per ITI new syllabus of Electrical Trade
ACCESS 1R5A 0-1 ohms, 5 Amp 152 x 35 0.5 ` 750/-
ACCESS 10R5A 0-10 ohms, 5 Amp 305 x 35 1 ` 900/-
ACCESS 25R1A 0-25 ohms, 1 Amp 152 x 35 0.5 ` 750/-
ACCESS 300R1A 0-300 ohms, 1 Amp 152 x 35 0.5 ` 800/-
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 18 -
VARIACS
(DIMMERSTATS) (AUTO TRANSFORMERS)
Single Phase, Input 240V AC, Output 0 to 270V AC Three Phase, Input 415V AC,
Output 0 to 1470V AC
Current Portable (close) type Portable (close) type
Flush (Open) type
Rating (desk top models) (desk top model)
(panel mounting)
(amps)
Model No. Weight Rate (`) Model No. Weight Rate (`) Model No. Weight Rate (`)
1 amp V1F1 2.5Kgs 950/- V1P1 3.8Kgs 1350/- V1P3 14Kgs 4000/-
2 amp V2F1 2.9Kgs 1050/- V2P1 4.2Kgs 1450/- V2P3 14Kgs 4500/-
3 amp V3F1 3.3Kgs 1250/- V3P1 4.6Kgs 1750/- V3P3 16Kgs 5000/-
4 amp V4F1 5.9Kgs 2000/- V4P1 6.9Kgs 2500/- V4P3 26Kgs 7700/-
5 amp V5F1 6.5Kgs 2100/- V5P1 7.5Kgs 2600/- V5P3 28Kgs 8000/-
8 amp V8F1 8 Kgs 2700/- V8P1 9 Kgs 3200/- V8P3 32Kgs 9600/-
10 amp V10F1 9 Kgs 3000/- V10P1 10 Kgs 3400/- V10P3 35Kgs 10250/-
15 amp V15F1 13 Kgs 4600/- V15P1 18 Kgs 5300/- ---- ---- ----
20 amp V20F1 15 Kgs 5000/- V20P1 16 Kgs 5700/- ---- ---- ----
Variacs provide output voltage continuously adjustable from 0 to It also ensures smooth operation, long life and increased resistance to
270 volts AC for input voltage of 240 volts AC for single phase. For corrosion.
three phase variacs, output voltage is continuously adjustable Low Operating Torque: Glass smooth commutator, special sintered bushings
form 0 to 470 volts AC for input voltage of 415 volts AC. for the shaft and perfect assembly of coils, results in low operating torque.
Rugged Construction: All components are designed to give Smooth Voltage Variations: As voltage between turns is small and as the
maximum life to the variacs. Except for carbon tips, no other part brush-arm is in constant contact with more than one turning, harmful sparking is
needs any specific maintenance. This practically makes the avoided and output voltage can be set very easily to a fraction of a volt.
VARIACS maintenance free. Low Magnetizing Current:- High quality grain oriented silicon steel ensures
Excellent Regulation: The drop in voltage from no load to full minimum iron losses. No load current is less than 5% of the full load current.
load is minimal.
High Efficiency: Careful copper and core selection and design Negligible Maintenance and Trouble- Free Long Life:-
ensure low watt losses. Components needing inspection and maintenance are carbon tips and
No Wave Form Distortion: Variac provides an output voltage, commutator. Timely replacement of carbon tips and cleaning of the commutator
distortion less replica of the input voltage. surface of foreign particles and accumulated dust, ensures a considerably long,
Silver Plated Commutator: Special silver plating technique used maintenance-free and uninterrupted life to the variacs.
on the commutator enables it to withstand high overloads and
maintain constant contract drop.
Type A C E H f
V4P1 175 146 35 160 10
V6P1 175 146 35 160 10
V8P1 175 146 35 180 10
V10P1 175 146 35 180 10
V1P1 has rectangular box of 120mm(H) x 130mm(W) x 100mm(D) V15P1 225 176 40 190 11
V2P2 and V3P3 have rectangular boxes of 160mm(H) x 140mm(W) x 140mm(D) V20P1 225 176 40 190 11
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 19 -
TRAINERS
LINEAR IC TRAINER DIGITAL IC TRAINER DISCRETE COMPONENT
TRAINER
ACCESS LICT01 ` 4500/- ACCESS DICT01 ` 4500/- ACCESS DCT01 ` 4500/-
The Linear IC Trainer is intended for study, The Digital IC Trainer is intended for study, The Discrete Component Trainer is intended for
understanding & demonstrate various experiments understanding & demonstrate various experiments study, understanding & demonstrate various
covering different Linear ICs such as Op-amps & Timer covering different digital circuits by solder less experiments covering characteristics & applications
by solderless interconnections through use of 2 mm interconnections through use of 2 mm brass of different discrete components by solder less 2
brass terminations and patch cords terminations and patch cords mm brass terminations and patch cords
The trainer is housed in an elegant & sturdy plastic The trainer is housed in an elegant & sturdy plastic The trainer is housed in an elegant & sturdy plastic
cabinet and consists of mimicked different active/ cabinet and consists of mimicked various digital ICs & cabinet and consists of mimicked different active /
passive components / blocks such as 2xOp-Amp IC blocks passive components & blocks such as Diodes
741, Timer IC 555 with trigger, Diodes 1x1N4007, DC Regulated Power Supply : 5V / 500 mA 4x1N4007 Rectifier, 1xOA79 Germanium,
2x1N4148, 2xZeners, 1xLED, assorted values of Low frequency variable clock generator: One 3xZeners, 2xLEDs, one each of Diac, Triac, UJT,
resistors & capacitors Pulser : One independent bounceless manual pulser SCR, JFET, MOSFET, SL100 / SK100 Transistors,
Variable Resistors (pot) : 1 Logic Level Inputs : 8 independent logic level inputs LDR, Thermistor, 2xinductors, assorted values of
DC Regulated Power Supplies : to select High/Low TTL levels, each with LED resistors, capacitors & Buzzer
a. Fixed :+/-15V/150mA indications Variable Resistors (pots) : 3 (assorted)
b. Variable : 0 to 5V/ 150mA and 0 to 12V/150mA Logic Level Indicators: 8 independent logic level DC Regulated Power Supplies :
Breadboard : 840 tie points indicators for High / Low status of digital outputs a. Fixed :5V/150mA and +/-12V/150mA
Power On : Power ON switch with indicator for mains BCD to 7 Segment Decoder/ Driver with Display:1 b. Variable : 0 to 5V/ 250mA and 0 to 12V/250mA
on indication and fuse for protection. Logic Probe : 1 AC Supply : 15 – 0 – 15 V / 150 mA
Power Requirement : 230V +/- 10% 1phase AC ZIF socket : for use of any extra IC's up to 20 pin Connecting Strips : 3
Accessories : Set of 12 stackable patch cords, Mains Power On : Switch with indicator and fuse Power On : Switch with indicator and fuse
cord & Detailed Instruction manual Power Requirement : 230V +/- 10% 1phase AC Power Requirement : 230V+/- 10% 1phase AC
Accessories: Set of 12 stackable patch cords, Mains Accessories : Set of 12 stackable patch cords,
cord & Detailed Instruction manual Mains cord & Detailed Instruction manual
The Analog Component Trainer is intended for study, & The Op-Amp Trainer is intended for study, The Digital and Analog Bread Board Trainer is
demonstrate various experiments covering understanding & demonstrate various experiments useful for all types of experiments without soldering
characteristics & applications of analog components covering Op-amps & Timer by solderless The trainer is housed in an elegant & sturdy plastic
by solder less 2 mm brass terminations & patch cords interconnections through use of 2 mm brass cabinet and consists of a large breadboard and
The trainer is housed in an elegant & sturdy plastic terminations and patch cords mimicked necessary associated blocks to perform
cabinet and consists of mimicked different analog The trainer is housed in an elegant & sturdy plastic various experiments
active / passive components & blocks such as Diodes cabinet and consists of mimicked different active / Breadboards : 1680 tie-points
4x1N4007 Rectifier, 1xOA79 Germanium, 3xZeners, passive components & blocks such as 2xOp Amp IC Clock Pulse Generator : 10 Hz
2xLEDs, one each of Diac, Triac, UJT, SCR, JFET, 741, Timer IC 555 with trigger, Diodes 1x1N4007, Single Pulse Generator : 1
MOSFET, SL100 / SK100 Transistors, LDR, 2x1N4148, 2xZeners, 1xLED, assorted values of Logic probe : 1
Thermistor, 2xinductors, assorted values of resistors, resistors & capacitors Digital input logic Hi/Lo switches : 4
capacitors & Buzzer Variable Resistors (pot) : 1 Digital output indicators: 4
DC Regulated Power Supplies : DC Regulated Power Supplies : Variable Resistance (Pot) : 1
a. Fixed :5V/150mA and +/-12V/150mA a. Fixed :+/-15V/150mA DC Regulated Power Supplies :
b. Variable : 0 to 5V/ 250mA and 0 to 12V/250mA b. Variable : 0 to 5V/ 150mA and 0 to 12V/150mA a. Fixed : 5V/100mA & +/-12V/100mA
AC Supply : 15 – 0 – 15 V / 150 mA Controls Switches : Two (1xSPDT & 1xDPDT) b. Variable : 0 to 15V / 100mA
Connecting Strips: 3 Power On : Power ON switch with indicator for mains AC Power Supplies: 15 – 0 – 15 V AC / 100mA
Breadboard: 640 tie points on indication and fuse for protection Power On : Switch with indicator and fuse
Power On : Switch with indicator and fuse Power Requirement : 230V +/- 10% 1phase AC Power Requirement : 230V +/- 10% 1phase AC
Power Requirement : 230V +/- 10% 1phase AC Accessories : Set of 12 stackable patch cords, Mains Accessories : Set of 4 stackable patch cords, 6
Accessories : Set of 12 stackable patch cords, Mains cord & Detailed Instruction manual stackable to hookup & 20 Hookup wires, Mains cord
cord & Detailed Instruction manual & Detailed Instruction manual
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 20 -
TRAINERS
FREQUENCY MODULATOR PAM / PWM / PPM
& DEMODULATOR MODULATION / UPS TRAINER
TRAINER KIT DEMODULATION TRAINER
ACCESS FMDT01 ` 5000/- ACCESS PPPT01 ` 11500/- ACCESS UPST01 ` 7500/-
The Frequency Modulator & Demodulator Training Kit The PAM / PWM / PPM Modulation & Demodulation The UPS (Uninterrupted Power Supply) Trainer is
is useful in study, understanding & performing the Trainer is multi-experiment trainer for different Digital useful in the study and demonstration of PWM,
experiments by solder less 4 mm brass terminations Communication experiments by solder less 4 mm AVR, overall functioning of UPS with and without
and patch cords brass terminations and patch cords load
The trainer is housed in an elegant & sturdy plastic The trainer is housed in an elegant & sturdy cabinet The trainer is housed in an elegant & sturdy plastic
cabinet and consists of mimicked dedicated circuits / and consists of mimicked dedicated circuits / blocks for cabinet
blocks for performing experiments such as : performing experiments such as : and consists of mimicked dedicated circuits / blocks
- Study of Modulating Signal - PAM - Pulse Amplitude Modulation & Demodulation with test points to observe the waveforms and
- Study of Carrier Signal - PWM - Pulse Width Modulation & Demodulation voltages
- Study of Frequency Modulation - PPM - Pulse Position Modulation & Demodulation Input : 190 to 260 V 10%, 50 Hz
- Study of Frequency Demodulation AF Signal generator : 1 / 2 KHz selectable with Output : 230 V
AF (Modulating) Signal Generator : 1 / 2 Khz variable amplitude Type : Offline
(selectable) with variable amplitude Carrier (Sampling) Frequency : 8KHz, 16KHz, Transformer : Multi tapped AVR type
Carrier Signal Generator : 100 KHz with variable 32KHz & 64 KHz Battery : 12 V (provided)
amplitude DC Regulated Power Supplies : Indicators : Audio & Visual provided
Frequency Modulator & Demodulator : Inbuilt Fixed :+/-12V & +5V / 250mA Load : Bulb Holder & Socket Provided
DC Regulated Power Supplies : +/- 12 VDC Power On : Switch with indicator and fuse Power On : Switch with indicator and fuse
Power On : Switch with indicator and fuse Power Requirement : 230V +/- 10% 1phase AC Power Requirement : 230V +/- 10% 1phase AC
Power Requirement : 230V +/- 10% 1phase AC Accessories : Set of 12 stackable patch cords, Mains Accessories : Mains Cord, Detailed Instruction
Accessories : Set of 4 stackable patch cords, Mains cord & Detailed Instruction manual manual
cord & Detailed Instruction manual
CPU : 8085 CPU operating at 6.144 Mhz CPU : 8051/89C51 CPU operating @10/12MHz The Application Kit for Microcontroller (6 Different
ROM : 8K bytes of ROM using 27512 EPROM ROM : 16K bytes using 27512 EPROM Applications) is a self contained kit for study,
RAM : 8K bytes of RAM using 6264 with Battery RAM : 8K bytes of RAM using 6264 with Battery understanding & performing experiments on 8051
Backup : NICD Battery & expandable Backup: NICD Battery Microcontroller with over 6 different applications
Timer/Counter : 3 Channel 16 bit Timer / Counter Memory Expansion : up to 64KB The trainer is housed in an elegant & sturdy plastic
using 8253 at 10 Pins FRC Connector Timer/Counter : Three Channel Timer/Counter using cabinet and consists of mimicked dedicated blocks
I/O Lines : 24 I/O lines provided through 8255 brought 8253 brought out at 10 Pins FRC Connector Microcontroller : 8051 with 4 Input ports
out at 26 Pins FRC Connector I/O Lines : 48 I/O lines provided through 8255 brought Programming : Serial through ISP Interface (PC
RS232C Interface : Serial Interface through SID/SOD out at 26 Pins FRC Connector Interface) & External via ACCESS M51-01
lines RS232C Interface : Using 8251 brought out at 9 Pins Applications :
Modes of commands : Hex Keypad & Serial D-Type Connector - 16X2 LCD Display
Display : Six Digit Seven Segment Display Modes of commands : Keyboard & Serial Mode - 8 bit LED Display LED with latching output
Keyboard : 28Key’s Hex Keypad using 8279 Display : 6 Digit 7 Segment Display using 8279 - 4 multiplexed Seven Segment Display
Keyboard Display Controller Keyboard : 25Keys Hex Keypad using 8279 Keyboard - 4 Bit Input push button switches
Downloading / Uploading : Facility for downloading / Display Controller - 2 channel (opto isolated) Relay application
uploading files from / to PC Downloading/Uploading : Facility for Downloading / - Buzzer application
Bus : All address, data & control signals / lines are Uploading files from / to PC - Serial Communication
available on KXT Bus 50 pin FRC Connector Bus : All address, data & control lines are available on Power On : Switch with indicator and fuse
Power Requirement : 230V +/- 10% 1phase AC KXT Bus 40 pins & 20 pins FRC Connector Power Requirement : 230V +/- 10% 1phase AC
Accessories : Mains cord & Instruction manual Power Requirement : 230V +/- 10% 1phase AC Accessories : PC interfacing Cable, FRC Cables,
Accessories : Mains cord & Instruction manual Mains Cord, Detailed Instruction manual,
Evaluation Software CD with programmes for PC
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 21 -
TRAINERS
POWER ELECTRONICS TRAINER SENSOR TRAINER KIT FIBRE OPTIC
WITH 6 ONBOARD APPLICATIONS COMMUNICATION TRAINER
The Power Electronics Trainer with 6 Onboard The Sensor Trainer Kit is a modularly designed The Fibre Optic Communication Trainer is a
applications is useful to perform various characteristics & complete training kit with all the necessary useful, low-cost Optical Fibre based Voice
applications experiments of different power components sensors, sources, electronic instrumentation, Communication Training System. 2mm brass
by solder less 2 mm brass terminations and patch cords necessary jigs & displays. Experimentation is terminations provided
The trainer is housed in an elegant & sturdy plastic down by 2mm brass terminations & patch cords The trainer is housed in an elegant & sturdy
cabinet and consists of mimicked different active & The trainer is housed in an elegant & sturdy plastic cabinet and consists of mimicked
passive components commonly used in Power plastic cabinets and consists of mimicked dedicated circuits / blocks with necessary test
Electronics such as Diode, SCR, FET, MOSFET, UJT, dedicated circuits / blocks with necessary test points for performing experiments such as :
Triac, Diac, IGBT - all 1 each points. The various sensors covered are : - Setting up of Simplex Analog Voice Link via FO
Bank: Resistors & Capacitors Thermal / Temperature Sensors with heater - Study Tx & Rx circuit & observe signal on LED
Loads : Resistive, Lamp & Motor Thermocouple, Thermistor & RTD The Tx side : Microphone, Input Amplifier & FO
10K Variable Resistance (Pot) : 1 Strain / Load Sensors Tx with variable sensitivity & FO LED (660nm)
DC Regulated Power Supplies : a. Fixed : +12V/250mA Strain Gauges & Load Cell The Rx side : FO Photo detector (660nm),
b. Variable : 0 to 15V/250mA and 0 to 30V/250mA Mounted on cantilever beam with weights Optical Receiver with variable sensitivity, Low
AC Supply/Source : 15 – 0 – 15 V Displacement (Linear / Angular) Pass Filter, AC Amplifier, Power Amplifier with
Firing Circuit 1 : R & RC with variable R & C Linear - LVDT Volume Control, Speaker & LED
Firing Circuit 2: UJT with variable Time Constant Angular - Speed sensor and a motor with variable Fibre Optic (FO) cable:1meter with termination
Firing Circuit 3: PWM with variable width & frequency speed control DC Regulated Power Supplies:+/-12V /150mA
Digital Volt/ Amp meter: 1 (200V/200mA DC selectable) Special Purpose Sensor : Smoke sensor Sine Generator : 1KHz (variable amplitude)
Power On : Power ON switch with indicator for mains on Power On : Power ON switch with indicator for Power On : Power ON switch with indicator for
indication and fuse for protection mains on indication and fuse for protection mains on indication and fuse for protection
Power Requirement : 230V +/- 10% 1phase AC Power Requirement : 230V +/- 10% 1phase AC Power Requirement : 230V +/- 10% 1phase AC
Accessories : Set of 12 stackable patch cords, Mains Accessories : Set of 20 stackable patch cords, Accessories : Microphone, Speaker, Set of
cord & Detailed Instruction manual Mains cord & Detailed Instruction manual stackable patch cords, Mains cord & Detailed
Instruction manual
STEPPER MOTOR WITH WHEATSTONE'S BRIDGE
DIGITAL CONTROLLER WITH GALVANOMETER PLC TRAINER
& BATTERY
ACCESS STDC01 ` 7500/- ACCESS WBT01 ` 5000/- ACCESS PLC01 ` 45000/-
Stepper Motor with Digital Controller is useful in the study The Wheatstone's Bridge with Galvanometer & The PLC Trainer is intended for study,
and working of a stepper motor with digital control Battery is a useful, low-cost self contained understanding & demonstrate various
The trainer is housed in an elegant & sturdy plastic dedicated trainer kit to find the value of unknown experiments covering PLC (Programmable
cabinet & consists of mimicked dedicated components resistance, by solderless interconnections Logic Control) by solderless interconnections
/blocks. 2mm terminations are provided through use of 4mm brass terminations & patch The trainer is housed in an elegant & sturdy
Stepper Motor : Bi - directional, PM rotor & bifilar stator cords plastic cabinet and consists of mimicked
Motor Characteristics : Self starting, low moment of The trainer is housed in an elegant & sturdy different blocks such as :
inertia, instantaneous start, stop and reversal of rotation plastic cabinet & consists of mimicked dedicated Inputs : 4 Digital (DI) & 2 Analog(AI) or 6 DI
Rotation : 200 Steps / revolution components etc as follows : Outputs : 4 Digital (DO) (relay based)
Stepping Angle : 1.8 deg Various fixed & variable resistor arms Display : LCD 16x4 lines backlit
Controller : Versatile solid state electronic digital control Analog Galvanometer for null detection DC Supply : 24V/1A
Output : Pulse pattern for driving the stepper motor +5V DC / 100mA Hi / Lo Inputs : 6 with individual LED Indications
Type of Control : 1.Steps, 2.Speed & 3. Direction Facility to select DC input to bridge, i.e., Battery Output Indicators : 4(LED) & 1(audio)
Pulser : Bounceless manual pulser or Low Voltage DC (from mains) Power On : Power ON switch with indicator for
Clock Generator: Variable clock frequency generator Power On: Power ON switch with indicator for mains on indication and fuse for protection
Power On: Power ON switch with indicator for mains on mains on indication & fuse for protection Power Requirement : 230V +/- 10% 1phase AC
indication & fuse for protection Power Requirement : 230V +/- 10% 1phase AC Accessories : Ladder diagram software CD,
Power Requirement : 230V +/- 10% 1phase AC Accessories : Set of 10 stackable patch cords, basic sample ladder programmes, PLC to PC
Accessories : Mains cord & Detailed Instruction manual Mains cord & Detailed Instruction manual interfacing cable, set of 12 stackable patch
cords, Mains cord & Detailed Instruction manual
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 22 -
RELAYS
CUT OUT RELAY REVERSE CURRENT OVER CURRENT UNDER VOLTAGE
RELAY RELAY RELAY
ACCESS RCO01 ` 3900/- ACCESS RRC01 ` 4800/- ACCESS ROC01 ` 3900/- ACCESS RUV01 ` 3600/-
Relays Cut out relay Reverse current relay Over current relay Under voltage relay
Model RCO01 RRC01 ROC01 RUV-01
System 1 phase / 2 wire
Parameter Cutout current Reverse Current Over Current Under voltage
controlled
Nominal (V/I) 230V AC 230V AC 230V AC / 5A 230V AC
Set Point 5A 30 to 90mA 75 to 105% 75 to 105%
Indicator - Visual 2 LEDs - ON & Cutout fault 2 LEDs - ON & Reverse Current fault 2 LEDs - ON & Over Current fault 2 LEDs - ON & Under voltage fault
Indicator - Audio Buzzer
O/P relay contact 1 potential free contact (NO - C - NC) of 5A /230V AC
Aux Supply 230V +10%, 50Hz, 1 Phase AC
Size 96mm x 96mm (Cutout : 92mm x 92mm)
TRANSFORMER
POWER FACTOR KILO WATT METER
METER (0-1-3KW/3000W) SINGLE PHASE
ACCESS 34A26 ` 2000/- ACCESS 34A23 ` 2000/-
ACCESS TX01 ` 7500/-
Type Power Factor Meter (Digital) Kilo Watt Meter (0-1-3KW) Digital
Model 34A26 34A23
Parameters pF P (Watt)
Measurement 500 V / 5A / 45-65 Hz 500 V / 5A / 45-65 Hz
(Auto Ranging) Copper wound, Core type, Air Cooled
Capacity : 1 KVA
Display 1row, 4 digit, 7-segment Ultra Bright LED Primary Voltage: 240V AC
Aux Supply 90V to 270V AC/DC ; 50Hz Secondary Voltage : 0-12-24-50-115V AC
Size 48mm x 96mm (Cutout : 44mm x 92mm) with backllite sheet Top & BIT-15 Education
type terminals.
KNIFE SWITCH
ACCESS KS 01 ` 2700/- ACCESS KS 02 ` 3300/- ACCESS KS 03 ` 3900/- BATTERY CHARGER
Knife switch SPDT/ DPDT & TPDT fitted with fuse terminals all mounted on an open backlite sheet
C) Star Delta Starter (for 3f AC Motors) B) DC 3 Point Starter ACCESS CT150/5 ` 300/-
Manual: ACCESS SSDM01 ` 9000/- ACCESS SDC03 ` 2400/-
(for DC Shunt Motors)
ii) Semi-automatic: ACCESS SSDS01 ` 9000/-
iii) Automatic: ACCESS SSDA01 ` 9000/- C) DC 4 Point Starter Bar Primary low tension type tape wound CT.
ACCESS SDC04 ` 2400/- CT Ratio: 150/5Amp.
D) Auto Transformer type starter (for DC Compound Motors) Burden: 5VA.
ACCESS SAT01 (for 3f AC Induction Motor) ` 13500/- Class: 1
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 23 -
Excise Duty Guarantee Validity Jurisdiction Place of Origin
NIL 1 YEAR upto 30.06.2016 MUMBAI only MUMBAI
FREIGHT: Extra ` 60/- Per Kg through courier. Minimum couriers freight charges are ` 200/-. Freight to pay
basis for dispatches through lorry
VALUE ADDED TAX (VAT) : Extra at 12.5% on all products; (except 5% on sine + square generators, current
transformers and variacs. for Maharashtra invoicing).
PAYMENT TERMS: 100% against Performa invoice by way of demand draft favouring ACCESS
TECHNOLOGIES payable at Mumbai or, deposit in any branch of Union Bank of India in our Current Account
number 546401010050487 (at Union Bank of India, Powai, Mumbai-400076) or demand draft or cash payment
against collection of material from our above address. IFS code of our bank is UBIN0554642.
Looking forward for your valued purchase orders and thanking your, we remain.
a h
Paarth Sh
Authorised Signatory
The material will be dispatched to you directly through courier/lorry. We do not despatch
material by our person, railways, air, post office or angadias.
P.S. 1. We reserve our right to revise above data without prior intimation. Taxes and levies
may vary as per government rules.
2. We are manufacturers of ACCESS products and stockiest of remaining products.
3. Our rates and terms and conditions are not negotiable and we do not offer
discounts. Kindly treat this quotation as Final for placing orders.
Manufactured / Marketed by
ACCESS TECHNOLOGIES
C-107, Kailas Industrial Complex, Hiranandani Link Road, Park Site, Vikhroli (W), Mumbai - 400 079. INDIA
Phone : +91-22-25170633 / 25173338, E-mail : info@accesstech.co.in Website : www.accesstech.co.in
We reserve our right to revise the above data without prior information. The rates above are for supplies within India.
VAT & Freight extra. The rated are valid until 30.06.2016
- 24 -