Professional Documents
Culture Documents
2
4 3
1
11 10
6 8
5 7 12 14
9
15
13
1 Display Default view can be selected from e.g. single line diagram (SLD), measurement, events
2 Self-supervision and Ready-LED steady: OK, Ready-LED flashing: Internal Relay Fault (IRF), Start-LED steady: protection started,
protection indicator LEDs Start-LED flashing: protection function blocked, Trip-LED: protection operated
3 Programmable LEDs Can be programmed for alarming and indication with latching and/or flashing features in 3 colors
4 Function buttons Can be configured either as menu shortcuts or control buttons
5 Object control buttons Press open/close and confirm by pressing enter. If there is more than one controllable object select the object
first with navigation buttons. Note: R/L button has to be in Local mode
6 Escape / Cancel Used for canceling actions and leaving setting mode without saving the values. Returns back to menu.
7 Navigation buttons Left = go back, Right = go further, Up = scroll up, Down = scroll down. Up/down can also be used when
selecting controllable objects like breakers and switches in single line diagram.
8 Enter Entering to parameter setting mode and confirming new values or selection in dialogs
9 Authorization If authorization is used you can log in or log out using this button
10 Clear Clearing events and indications, see next page for further details
11 LED text view Multipage programmable LED text view. Press to see the 3 sets of 15 LED texts
12 Menu Switch views in between the main menu and default view
13 Remote / Lemote Changes the control between Local/Remote
14 Help View help menu
15 Front communication port RJ-45 connection
Using the local HMI
The most common function blocks are listed below, please refer to the 630 series Technical Reference manual for the full list.
The available function blocks varies depending on the selected IED and configuration used.
www.abb.com/substationautomation
1MRS757577 A