Professional Documents
Culture Documents
Abstract: In a previous paper [Opt. Express 10, 663 (2002)], the current
author presented a principle and a technique allowing the transformation of
a random relationship between the complex amplitudes at two wave fronts
into a selective one. As the current paper shows, the same principle can be
readily implemented to transmit one-dimensional images through a single
multimode optical fiber.
©2003 Optical Society of America
OCIS codes: (090.0090) holography; (110.2350) fiber optics imaging.
1. Introduction
The transmission of images by purely optical means (mainly in the field of endoscopy) is
currently carried out by coherent bundles of optical fibers. The attractive idea of replacing the
bundle by a single fiber, either monomode or multimode, has been actively investigated, and
several principles and techniques have been proposed. Wavelength encoding [1,2,3], spatial
coherence encoding [4], optical phase conjugation [5], and space-time conversion [6] are
among the principles successfully tested in the laboratory.
This paper presents another technique, based on a principle already published by the
author [7], which can be stated on general grounds as follows. Let two wave fronts of an
optical system be randomly correlated (such as at the entrance and exit surfaces of a diffusive
medium or at the entrance and exit cross sections of a multimode fiber). Let phase changes be
introduced on both surfaces,varying linearly with time and (with opposite signs) according to
one coordinate x.
If a time-integrated hologram is made of the complex amplitude at the exit surface, in the
reconstructed image the intensity varies according to x proportionally to the corresponding
variations at the entrance surface.
The following section shows how this principle can be implemented to transmit one-
dimensional (1D) images through a fiber of 1 mm diameter.
#2794 - $15.00 US Received July 29, 2003; Revised August 07, 2003
(C) 2003 OSA 25 August 2003 / Vol. 11, No. 17 / OPTICS EXPRESS 1949
2. Experimental demonstration
Figure 1 presents the basic features of the experimental arrangement. A collimated laser beam
of sufficient cross section is focused by a lens L on the entrance section of an optical fiber
after illuminating a transparency with real and 1D transmission function M(x) placed at the
plane xy. A device producing a linear phase change according to x is placed at the same plane.
In our case the device (Fig. 2) was composed of two glass plates separated by a deformable
rubber gasket, one of them fixed, the other rotating around a fixed pivot with constant rotation
speed ω1. The space between the plates was filled with a liquid of refractive index n.
A similar device is placed on plane x’y’at a suitable distance from the exit section of the
fiber, the angular speed of the rotating plate being ω2 .A hologram of the complex amplitude
at plane x’y’ is made by means of the holographic plate H with reference beam R and
exposure time T. Let the complex amplitude of the light wave impinging on plane xy be a(x,y).
The complex amplitude at plane x’y’, just after the second device, can be expressed as
∗
∫ a( x' , y ' , t ) R dt + ∫ a( x' , y ' , t ) ∗ Rdt , (2)
where the asterisk means conjugate complex. Since R is assumed constant with time and since
in multiple integrals the order of integration is arbitrary, the complex amplitude of the virtual
image reconstructed by R is obtained by integrating a(x’,y’,t) as expressed by Eq. (1),
according to time and for the time interval 0-T.
The result is
#2794 - $15.00 US Received July 29, 2003; Revised August 07, 2003
(C) 2003 OSA 25 August 2003 / Vol. 11, No. 17 / OPTICS EXPRESS 1950
T
sin k (ω 1x + ω 2 x')(n − 1)
2 T
ϕ ( x' , y') =
exp ik (ω 1x + ω 2 x')(n − 1)
(4)
T 2
k (ω 1 x + ω 2 x ')(n − 1)
2
ω2 ω2 ω2
a ( x' , y ' ) = M x = − x ' ∫ a x = − x ' , y exp iϑ x = − x' , y; x ' , y ' dy .
ω1 ω 1. ω1
(6)
The virtual image reconstructed by R contains a random structure [the integral function in
(6)], modulated by the real function M(x). The latter is transmitted from the object xy plane to
the image x’y’ plane with a magnification (or reduction) factor that includes the sign. The
images are identical if the rotation speeds of the transmitting and receiving devices have the
same values but opposite signs. For equal signs the image is inverted, as in the case of a lens.
Figure 3 shows an object consisting of straight lines of different thicknesses varying from
0.3 to 1.2 mm as transmitted by an optical fiber of 1 mm diameter and 1 m length. The
transmitted image can be recorded by photographing either the virtual or the real holographic
displays, visualized by a diffusive screen. Recording the real display is preferable if a digital
camera is used, in order to avoid conflicts with the focusing automatisms.
#2794 - $15.00 US Received July 29, 2003; Revised August 07, 2003
(C) 2003 OSA 25 August 2003 / Vol. 11, No. 17 / OPTICS EXPRESS 1951
Other operating features were as follows: ω1= -ω2 ; ω1T = 0.03 rad ; He-Ne laser of 30
mw; reference/object exposure ratio 8; Slavich PFG-01 holoplates ; SM-6 developer
recommended by Slavich, no bleaching; transmitted image recorded by a digital camera on
the real hologram.
No special image-processing step was used, save the “image automatic balancing” of the
Kodak Photo Editor software.
A small lens (not drawn in Fig. 1) was placed at the entrance section of the fiber, with the
task of reducing the lateral displacement of the focal point of L caused by the first linear phase
variation.
It is worthwhile to point out that such a lens has no imaging purposes, since the object and
the image stay in the xy and x’y’ planes, respectively, and the image is not modified by any
change in the optical system between them.
3. Advantages and drawbacks of the technique
Since the aim of this paper is limited to contributing (supposedly) new concepts in the field,
the discussion on these points will be very concise.
The main advantages of the technique seem to be its simplicity and the good resolution
obtainable.
As for the main drawbacks, namely, the delayed time and the 1D limit, here are a few
comments:
Delayed time: This disadvantage could in principle be overcome by the use of a
photorefractive crystal in place of a conventional holographic plate.
Two-dimensional capability seems in practice unattainable (see Ref. [7] for a discussion
on this point) unless an hybrid and delayed-time technique is used. A two-dimensional subject
can be studied for instance by making a series of holograms for a series of directions of the
rotation axes y and y’ and by combining them by means of a tomographic algorithm.
#2794 - $15.00 US Received July 29, 2003; Revised August 07, 2003
(C) 2003 OSA 25 August 2003 / Vol. 11, No. 17 / OPTICS EXPRESS 1952