Professional Documents
Culture Documents
It is recommended that this online proof file is opened only in Adobe Reader or Adobe Acrobat with the following settings:
Use Overprint Preview: Always | Smooth Images: No | Enhance thin lines: No | Use Local Fonts: No
Please refer to the following checklist before submitting your artwork to make sure it is 100% correct:
Size of the artwork: Please ensure the dimensions (width and height) are 100% correct.
Resolution of the artwork: Please ensure that all elements of your artwork are sharp
and acceptable. In addition, please ensure the resolution of any image is at least 300 PPI,
which is the minimum value we recommend for raster elements.
NO content is lost, nor additional unwanted elements included: All fonts and images
should be embedded into your artwork and any unwanted elements removed.
NO important elements in the safety margin: To maintain design integrity and avoid
possible losses during the cutting process, no elements should be within 3 mm of the trim line.
Folding check (if applicable): We suggest you print out the artwork and test fold to
ensure it matches exactly the configuration you have selected .
Symbols
Bleed Area (3 mm.)
A safety area around the Trim Line which is created in
case there is the deviation during the cutting process.
Trim Line
This blue line indicates where the artwork will be cut.
Safety Line
A line 3 mm. within the Trim Line.
Safety Area
Important elements should be kept within the Safety Area
not exceeding the Safety Line, to avoid loss of information
YOUR during the cutting process.
COMPANY
Die-Cut Line
This line indicates where the artwork will be cut
(for stickers and presentation folders, etc.).