You are on page 1of 7

Produktübersicht

Gigabit Ethernet Micro Switch Twisted Pair Uplink PoE

Beschreibung Eigenschaften
The new generation now supports complete gigabit Full Gigabit performance on all ports
performance on all connections. The central switch is Power supply to end devices with PoE (Power Source
connected via an integrated 10/100/1000Base-T port, Equipment)
whereby this is hidden after installation. Optional there Alternative power supply via uplink port using Power
are versions with additional TP downlink port available. over Ethernet (Powered Device)
Easy installation due to snap-in mounting (wide
The complete Power-over-Ethernet (PoE) functionality range of accessories)
has been designed in accordance with IEEE Std. Integrated management agent, SNMP/Web-
802.3af and is supported of all four RJ-45 ports based/Telnet/Device Manager
(10/100/1000Base-T). Intelligent power management VLANs and CoS according to IEEE 802.1q,
monitors the current power consumption of the end Authentication according to BSI, IEEE 802.1x, etc.
devices connected.

The switch is generally equipped with integrated


network management and supports all management
standards from Telnet to SNMP and web browser.
Furthermore, the switch has at its disposal features for
data prioritisation, VLANs and authentication in
accordance with IEEE Std. 802.1x.

1/7
Abmessungen

2/7
Technische Daten

Allgemein Lokale Anschlüsse (Twisted-Pair)


Typ Gigabit Ethernet Switch Layer Portanzahl 4
2+, IEEE 802.3 compliant
Typ Gigabit Ethernet, Triple Speed
Performance Store-and-forward, Full wire- 10/100/1000Base-T
speed, non-blocking auf allen
Ports Anschluss RJ-45 Buchse, geschirmt

MAC-Adressen 8.192 Adressen, automatisches Kabeltyp Twisted-Pair Kabel, Kategorie


Learning und Aging 5e, Impedanz 100 Ohm, Länge
max. 100 m
Jumbo Frames max. 10.240 Bytes
Flow Control Pause Frames (IEEE 802.3x),
VLANs Tagging IEEE 802.3ac konfigurierbar
Priorisierung IEEE 802.1p
VLAN IDs 0..4095 Pinbelegung Auto MDI/MDI-X, Auto Polarity
Statische und dynamische
Power-over- Power Sourcing Equipment
VLAN Tabelle
Ethernet (PSE) IEEE 802.3af
Quality of 4 Hardware-Queues pro Port Class 0, max. 15,4 W
Service Priorisierung nach: Forced-Mode (Legacy-Devices)
* IPv4/IPv6 Pinbel. Adern 1/2 (+), 3/6 (-)
* VLAN priority IEEE 802.1p
* Port
Gewichtung Strict/Weighted,
konfigurierbar

Management CLI: telnet


Web: http
SNMPv1, SNMPv2c
Microsens NMP-Software

Uplink (Twisted-Pair) Downlink (Twisted-Pair)


Portanzahl 1 Portanzahl 1 (MS450186M und
MS450187M)
Typ Gigabit Ethernet, Triple Speed
10/100/1000Base-T Typ 1

Anschluss RJ-45 Buchse, geschirmt Anschluss RJ-45 Buchse, geschirmt

Kabeltyp Twisted-Pair Kabel, Kategorie Kabeltyp Twisted-Pair Kabel, Kategorie


5e, Impedanz 100 Ohm, Länge 5e, Impedanz 100 Ohm, Länge
max. 100 m max. 100 m

Flow Control Pause Frames (IEEE 802.3x), Flow Control Pause Frames (IEEE 802.3x),
konfigurierbar konfigurierbar

Pinbelegung Auto MDI/MDI-X, Auto Polarity Pinbelegung Auto MDI/MDI-X, auto polarity

Power-over- Powered Device (PD)


Ethernet IEEE 802.3af Class 0, max.
15,4 W
Forced-Mode (Legacy-Devices)
Pinbel. Adern 1/2 (+), 3/6 (-)

Anzeigen Bedienfeld
Power Lokale Ports 1..4: Reset Taste Rücksetzen des Switches,
grün: PoE speisend Neuladen der letzten
orange: PoE Standby gespeicherten Konfiguration
rot: PoE Fehler
Config Taste Einzeln: Anfordern der IP-
Link Lokale Ports 1..4: Konfiguration für Management
blinkend: Datenübertragung Zusammen mit Reset-Taste:
grün: freigeschaltet Rücksetzen der Konfig auf
orange: blockiert Werkseinstellungen,
rot: nicht autorisiert abschaltbar

3/7
Status Switch Status (S)
grün: Gerät betriebsbereit
Link Status Uplink (5)
blinkend: Datenübertragung
grün: freigeschaltet
orange: blockiert
rot: nicht autorisiert
Link status Downlink (6)
blinking: activity
green: freigeschaltet
orange: blockiert
rot: nicht autorisiert

Stromversorgung (Gleichspannung - DC) Umgebungsbedingungen


Eingang 44..57 VDC (48 VDC typ.) Arbeits- 0..40 °C
temperatur
Leistungs- Typ. 6,5 W (ohne PoE-
aufnahme Speisung), max. 65 W (inkl. Lagerungs- -20..85 °C
PoE-Speisung) temperatur

Anschluss 3 pol. Schraubklemme, Rel. 10..90%, nicht kondensierend


PE/V+/V- Luftfeuchtigkeit

Erdung (PE) 6.3 mm Flachstecker

Mechanik Normen
Abmessungen 90 mm x 45 mm x 58 mm (L x CE 2004/108/EC (EMC)
B x H, ohne Anschlüsse) 2006/95/EG (Low Voltage)

Einbautiefe 32,6 mm Sicherheit EN 60950-1:2006

Gewicht 310 g Störaussendung EN 55022:2006

Gehäusefarbe Standardfarbe: reinweiß, Störfestigkeit EN 55024:1998


optional graphitgrau oder
silber (weitere Sonderfarben IEEE (Ethernet) 802.3i 10Base-T
auf Anfrage möglich) 802.3u 100Base-T
802.3z 1000Base-X
802.3ab 1000Base-T
Zuverlässigkeit 802.3x Flow Control
802.3ac VLAN Tagging
MTBF 100.000 h 802.3af PoE
802.1D Spanning Tree
Methode kalkuliert, MIL-HDBK-217F 802.1Q Tagged VLANs
802.1p Packet Prioritisation
802.1w Rapid Spanning Tree
802.1X Network Access Control

RFC IPv4:
- RFC 791 (IPv4)
- RFC 826 (ARP)
- RFC 792 (ICMP)
- RFC 2131 (DHCP)
- RFC 2474/3260 (IPv4
DiffServ/IPv6 Traffic Class)
- RFC 4541 (IGMP)

- RFC 1769 (SNTP)


- RFC 1155/1156/1157
(SNMPv1)
- RFC 1901/1905/1906
(SNMPv2)
- RFC 3411/3412/3584
(SNMPv3)
- RFC 2574/3414 (USM)
- RFC 2575/3415 (VACM)
- RFC 2865 (RADIUS)
- RFC 2866 (Accounting)
- RFC 2868 (Tunnel Attributes)
- RFC 5424 (Syslog)

4/7
Zusätzliche Features
Software - Port Monitor
- CDP v1, v2

5/7
Bestell-Bezeichnung

Beschreibung Art.-Nr.

Gigabit Ethernet Installations-Switch, 5x10/100/1000T,waagerechter Einbau, MS45018 4PM-48


48 V DC Stromversorgung, managebar, VLANs, QoS, 4x PoE-Ports

Gigabit Ethernet Installations-Switch, 5x10/100/1000T, vertikaler Einbau, MS45018 5PM-48


48 V DC Stromversorgung, managebar, VLANs, QoS, 4x PoE-Ports

Gigabit Ethernet Installations-Switch, 6x10/100/1000T, waagerechter Einb., MS45018 6PM-48


48 V DC Stromversorgung, managebar, VLANs, QoS, 4x PoE-Ports

Gigabit Ethernet Installations-Switch, 6x10/100/1000T, vertikaler Einbau, MS45018 7PM-48


48 V DC Stromversorgung, managebar, VLANs, QoS, 4x PoE-Ports

6/7
Zubehör

Beschreibung Art.-Nr.

Universeller Einbausatz für E2-Gerätebecher bestehend aus Adapterblech und MS140029


Abdeckrahmen, Farbe: reinweiß

Netzteil 110-230 VAC, 48 VDC, 1,35 A, 65 W MS700675

SFP Fast Ethernet Transceiver 100Base-FX, Monomode 1310nm, digital Diagnostics, - MS100191DX
40..85 °C

SFP Gigabit Ethernet Transceiver 1000Base-LX, Monomode 1310nm, digital Diagnostics, - MS100210DX
40..85 °C

nmp Professional, Management Software samt 1 Jahr Updatelizenz MS200160-1

nmp Standard, Management Software samt 1 Jahr Updatelizenz MS200162-1

NMP Server - Management Software samt 1 Jahr Updatelizenz, inkl. 5 Clients MS200164-1

This docume nt in whole or in pa rt ma y not be duplica te d, re produce d, store d or re tra nsmitte d without prior writte n
pe rmission of MICRO S ENS GmbH & Co. KG. All informa tion in this docume nt is provide d ‘a s is’ a nd subje ct to cha nge
without notice . MICRO S ENS GmbH & Co. KG discla ims a ny lia bility for the corre ctne ss, comple te ne ss or qua lity of the
informa tion provide d, fitne ss for a pa rticula r purpose or conse cutive da ma ge . MICRO S ENS is a tra de ma rk of MICRO S ENS
GmbH & Co. KG. Any product na me s me ntione d he re in ma y be tra de ma rks a nd/or re giste re d tra de ma rks of the ir
re spe ctive compa nie s.

© 2018.11.13 MICROSENS GmbH & Co. KG - 59067 Hamm/Germany - Tel. +49 2381 9452-0 - www.microsens.com

7/7

You might also like