You are on page 1of 2

Cooling Towers

CUSTOM-MADE SOLUTIONS
FROM STANDARD COMPONENTS

APPLICATION & BENEFITS ADVANTAGES


Kelvion designs, manufactures and maintains cooling towers for process
and climate cooling. Our energy efficient and environmentally friendly ⊲ LOWEST CARBON FOOTPRINT
cooling towers lead the industry because of our commitment to high ON COOLING WATER
quality standards.
The modular cooling tower system can be expanded and customized,
and there are standard solutions available for various capacity ⊲ SMART MODULAR CONSTRUCTION
requirements. This system is standardized to a great degree and has AND ASSEMBLY
been adapted to a great number of customer wishes. Around 80% is
available as standard solutions, with the remaining 20% implemented
as customized engineering. ⊲ RELIABLE, OVER 50 YEARS’
The factory-preassembled modules are employed primarily for smaller EXPERIENCE
projects, for which the customer enjoys significant cost advantages.
The larger the project, on the other hand, the more effective are
field-erected cooling towers. Our engineers make customized
modifications to meet your special requirements.
COOLING TOWER MODELS

POLACEL CMC SERIES POLACEL CMDR SERIES POLACEL CMDI SERIES POLACEL XE-XT-XL-XM
⊲ Counterflow principle ⊲ C
 ounterflow principle ⊲ Counterflow principle ⊲ Crossflow principle
⊲ Low energy consumption ⊲ Cells can be positioned B2B or ⊲ Air passes horizontal
and a substantial noise on concrete basin or in-line configration through the contact fill
reduction delivery with integrated ⊲ C
 an process large and water flows silently
⊲ M
 odules are supplied FRP basin quantities of water and in the basin below
ready to use and they ⊲ Direct fan drive with has a substantial cooling ⊲ The height of the
are easy to adjust to geared motor provide capacity, up to 300 m2 modules is relatively low
cooling requirements economic solution ⊲ T
 he motor drive line is compared to counter-
and space ⊲ Modules can be pre- classical mounted on a flow and most models
assembled on site and torque-tube. A walkable will be supplied
hoisted during short fandeck provides easy pre-assembled in 2 parts
maintenance stop access

COOLING TOWER AND CONSTRUCTION

© Kelvion • All rights reserved • Subject to changes • 05/18

EVAPORATIVE COOLING SMART ASSEMBLY & SUSTAINABILITY

⊲ Water flows down while the air is pulled upwards by a fan ⊲ Universal parts provide a quick only mechanical assembly
⊲ On the direct contact surface between water and air a small ⊲ Stainless steel frame and brackets grant a solid long
part of the water evaporates. The evaporation heat is lasting construction
distracted from the water phase and cools down the water ⊲ Different fills (film, net or grid) can adapt the cooling
⊲ Counter flow cooling approaches the wet bulb temperature process to any industrial (grey) make-up water.
⊲ Drift eliminators reduce the losses of water and minimize (Even for waste water applications)
droplet and aerosol emission ⊲ Low noise applications to meet local requirements

www.kelvion.com

You might also like