Professional Documents
Culture Documents
DO NOT USE THIS METHOD FOR DETAIL DESIGN – ALWAYS CONSULT A REPUTABLE SUPPLIER FOR DETAIL DESIG
Pipe characteristics
Pipe diameter d m 0.05
Pipe roughness e mm 0.05
Pipe horizontal length Lh m 100
Pipe vertical length Lv m 20
Bends 4
Pipe equivalent length L m 170
Type of conveying Pressure
Infos
Required volumetric throughput at pick-up m3/h 97.7
Volumetric mass of air at beginning of line kg/m3 1.9
Mass troughput ma kg/h 181.9
Volumetric mass of air at end of line kg/m3 1.2
Volumetric throughput end of line m3/h 150.9
Normalized air throughput Nm3/h 141.0
End of line air velocity m/s 21.3
Copyright www.PowderProcess.net
The content of PowderProcess.net is copyrighted but no warranty nor liability is ensured. The content of this site is to be seen as a help and important information and calculation m
always respect all applicable regulation. The use of the information is at the user an
Page 1
Rhodes methodology
PPLIER FOR DETAIL DESIGN
p and important information and calculation must always be double checked by the user through the quality procedure of his organization or by checking another source. The user must
on. The use of the information is at the user and its organization own risk and own cost.
Page 2
Rhodes methodology
Page 3