Professional Documents
Culture Documents
1/3
Technical description
Commando 300 is a hydraulic, self-propelled drilling For easy operation, good visibility and operator safety,
unit on a 4-wheel, oscillated drive carrier. It drills holes Commando 300 is supplied with an electronic remote
with a maximum recommended diameter of 64 mm (2 control unit. Thanks to the electronics, this unit has
1/2") and a maximum practical length of 15 metres fewer levers which make it easy to use. For operator
(50'), utilizing 25, 28 or 32 mm (1", 1 1/8" or 1 1/4") comfort Commando 300 is also equipped with a dust
extension rods. collection system, which gathers drilling dust from the
Commando 300 is a completely self contained drilling hole into a plastic bag.
unit. It is easily manoeuvrable with good rough terrain Typical applications for Commando 300 are foundation
capabilities. It is also easy to transport between job drilling, road cutting, trenching, occasional bolting and
sites on a truck or on a trailer, or it can even be lifted other special drilling applications. Therefore Com-
by a helicopter. mando 300 is most often used by construction con-
Commando 300 is equipped with HL 300, hydraulic top tractors, mines and quarries, and the municipal sector.
hammer rock drill. The rock drill is mounted on an alu- Due to its versatility Commando 300 is often included
minium chain feed, which is attached to an articulated in the equipment fleet of rental houses as well.
2
boom giving a drilling coverage of 10 m (108 sq-ft). A
48 kW (64 hp) diesel engine supplies power both for
hydraulic pumps and for an on-board compressor.
Several routine functions of Commando 300, e.g. col-
laring and antijamming, are automatically executed by
electronic controls.
SANDVIK TAMROCK reserves the right to change this specification without further notice. SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120
COMMANDO 300
2000-12-20
2/3
Drilling geometry
Transport dimensions
5560
5560
3770
1200 (max)
0 (min)
2580
260
2280
3770
2700 (max) 2970
1400 (min)
SANDVIK TAMROCK reserves the right to change this specification without further notice. SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120
COMMANDO 300
2000-12-20
3/3
SANDVIK TAMROCK reserves the right to change this specification without further notice. SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120