Professional Documents
Culture Documents
Order Information
Co
nt
ac
ts
Bell – Fort Worth, Texas, USA
&
U.S. CUSTOMERS
Or
Phone: 817.280.3471
de
rI
E-mail: dmartin@bellhelicopter.textron.com
nf
INTERNATIONAL CUSTOMERS
or
m
Phone: 817.280.4077
at
E-mail: jalatorre@bellhelicopter.textron.com
io
n
Bell – Tennessee, USA
Phone: 423.538.5114
E-mail: sales@bellhelicopter-tn.com
Bell – Canada
Phone: 403.275.3555
E-mail: calgarysupplycenter@bellhelicopter.textron.com
Bell – Asia
Phone: 65.6542.2422
E-mail: ftio@bht-asia.com.sg
Bell – Amsterdam
Phone: 31.20.449.6500
E-mail: info@bellhelicopter-ams.textron.com
Warranty
Phone: 817.280.3406
E-mail: warrantycpr@bellhelicopter.textron.com
Shipping Information
Bell Helicopter Tennessee
Attn: Mr. Bill Boatright
137 Industrial Park Road
Piney Flats, Tennessee 37686
USA
Bell accepts Visa and MasterCard credit cards for spare parts purchases in the U.S.
Complete information can be obtained by contacting your normal spare parts
administrator or Bell Spare Parts Order Administration at 817.280.2919.
Warranty –
W
1500 Hours/2 Years
ar
ra
nt
y
(1
Bell Helicopter (the Seller) warrants each overhauled or exchanged component to be free from
50
defect in material or workmanship under normal use and service. Seller’s sole obligation under
0
Ho
this warranty is limited to replacement or repair of parts which are determined to Seller’s
u
rs
reasonable satisfaction to have been defective within 1,500 hours of operation or two (2) calendar
/2
Ye
years after installation, whichever comes first and reimbursement of reasonable freight charges.
a
rs
Defective components and/or parts must be reported in writing to the Seller’s Warranty
)
Administration within 90 days of being found defective. Warranty adjustment is contingent
upon the Purchaser complying with the Seller’s Warranty Administration disposition
instructions for defective parts. Failure to comply with all of the terms of this paragraph may, at
Seller’s sole option, void this warranty.
This warranty is given and accepted in place of (I) all other warranties or conditions,
express or implied, including but not limited to the implied warranties or conditions of
merchantability and fitness for a particular purpose and (II) any obligation, liability, right,
claim or remedy in contract or in tort (delict), including product liabilities based upon strict
liability, negligence, or implied warranty in law.
This warranty is the only warranty made by Seller. The Purchaser’s sole remedy for a breach of
this warranty or any defect in a part is the repair or replacement of component parts and
reimbursement of reasonable freight charges as provided herein. Seller excludes liability, whether
as a result of a breach of contract or warranty, negligence or strict product liability, for incidental
or consequential damages, including without limitation, damage to the helicopter or other
property, costs and expenses resulting from required changes or modifications to the helicopter
components and assemblies, changes in retirement lives and overhaul periods, local customs fees
and taxes, and costs or expenses for commercial losses or lost profits due to loss of use or
grounding of helicopters or otherwise.
Seller makes no warranty and disclaims all liability in contract or in tort (delictual) liability with
respect to work performed by third parties at Purchaser’s request. This warranty shall not apply to
any component or part thereof which has been repaired or altered outside Seller’s factory in any
way so as, in Seller’s sole judgment, to affect its stability, safety or reliability, or which has been
subject to misuse, negligence or accident. Repairs and alterations which use or incorporate parts
and components other than genuine Bell parts or parts approved by Bell for direct acquisition
from sources other than Bell itself are not warranted by Bell, and this warranty shall be void to the
extent that such repairs and alterations, in Seller’s sole judgment, affect the stability, safety or
reliability of the helicopter or any part thereof, or damage genuine Bell or Bell-approved parts. No
person, corporation or organization, including Bell Customer Service Facilities, is authorized by
Seller to assume for it any other liability in connection with the sale of its components and parts.
Exchange & Rental Program
Ex
ch
an
Exchange Program
g
e
Bell Helicopter offers a wide range of airframe drivetrain components, electrical items,
&
Re
hydraulic components, elastomeric components, and instruments for exchange. Parts are
nt
visible through the Bell VISTA system assigned to the “AXR” warehouse, or contact your
al
normal spares administrator for assistance. We continually evaluate our exchange program
to meet customer demand. If you would like us to consider adding components to our list,
contact us and let us know what you need – we will give it serious consideration.
2. STANDARD EXCHANGE
The price for these parts is based on your unit being repairable. Bell will accept your
unit for exchange and your final billing will be for the exchange price.
NOTE: Billings will be at Reconditioned price and credit will be issued after your unit is
received and evaluated. If your unit is sent in before exchange unit is sent out, you will be
billed only the exchange price.
Rental Program
Bell Helicopter offers a rental program for Main Rotor blades while your blades are being
repaired. Rental Period is for 90 Days.
M
ed
iu
m
Bell Helicopter offers repair and overhaul of the Medium Helicopter components listed here:
s
Bell 204 and 205A1
Bell 212
Bell 412 Series
UH-1 Series
These prices are for the most basic overhaul services. Many overhauls will require additional
components not included in the published price. Actual overhaul cost of any component will be
determined upon a complete teardown and inspection. Rough Order of Magnitude (ROM) or
Not-To-Exceed pricing will be provided upon request.
Customers will be notified of costs associated with replacement of life limited parts and other
replacement parts necessary to meet Bell CR&O Manual requirements. Bell Helicopter will not
complete any additional repair/overhaul work without having documented customer authorization.
Replaced parts can be returned to the customer upon receiving a written request. However, all
returned parts will be permanently altered or dismembered to comply with un-airworthy part
policies. These replaced parts will be returned at the customers expense.
Through our dedicated Repair and Overhaul facility, Bell pledges to provide competitive prices plus
responsive turn-times to get you flying again quickly. Our staff will work with you to minimize your
down-time.
Estimated turn times published in the component price list are working days that the
COMPONENTS ARE ACTUALLY IN-WORK AT BELL TENNESSEE. The working days
published DO NOT include time in transit or time in customs.
BELL EXPERIENCE AND QUALITY PLUS COMPETITIVE PRICING MAKE US A FIRST CHOICE FOR COMPONENT
OVERHAUL!
(over)
INSP. INSP. EST. O/H OVERHAUL EST.
COMPONENT PART NUMBER (HRS) PRICE TURN TIME (HRS) PRICE TURN TIME
(Working Days) (Working Days)
Model 204
Main Rotor Hub 204-012-101-series 2400 $ 7,257 7
Mast Assembly 204-040-366-series 2500 $1,701 2 5000 $ 1,379 4
Stabilizer Bar Assembly 204-011-326-series 1000 $ 3,471 4
Swashplate Assembly 204-011-400-series 1000 $ 2,322 5
42/Gear Box 204-040-003-series 1500 $ 2,282 5
Transmission 204-040-009-series 1500/2000 $ 15,986 11
Tail Rotor Gear Box 204-040-012-series 1500 $ 1,669 5
Model 205
Main Rotor Hub 204-012-101-series 2400 $ 7,257 7
Tail Rotor Hub 212-010-701-series 1000 $ 2,250 3
Tail Rotor Hub Assy 212-011-701-series 2500 $ 2,250 3
42/Gear Box 204-040-003-series 1000 $ 2,282 5
Mast Assembly 204-040-366-series 2500 $1,701 2 5000 $ 1,379 4
Transmission 205-040-001-series 1000 $ 14,958 11
Transmission 212-040-001-series 6000 $ 14,958 11
Rotor Brake Quill 205-040-300-series 2400 $ 1,236 4
Tail Rotor Gear Box 209-040-400-series 1000 $ 1,667 5
42/Gear Box 212-040-003-series 3000/5000 $ 2,282 5
Tail Rotor Gear Box 212-040-004-series 3000/5000 $ 2,143 5
Model 212
Main Rotor Hub 204-012-101-151 1,200 $2,750 3 2400 $ 7,257 7
Mast Assy (1) 204-040-366-021 3,100 $1,701 2 5000 $ 1,379 4
Transmission (1) 212-040-001-179 3,100 $4,356 5 6000 $ 14,958 11
Driveshaft Hangar Assy 212-040-600-009 3000 $ 1,609 3
42/Gearbox 212-040-003-023 5000 $ 1,516 5
Tail Rotor Gearbox 212-040-004-103 5000 $ 2,143 5
Tail Rotor Hub 212-011-701-125 2500 $ 2,250 3
Rotor Brake Quill 412-040-123-101 2400 $ 1,236 3
Main Drive Shaft 212-040-005-103 3100 $ 2,590 3
Scissors & Sleeve Assy 204-011-401-series O/C $ 3,155 4
Model 412
Main Rotor Mast Assy 412-040-366-series 2500 $1,701 2 5000 $ 3,010 4
Transmission Assembly (412/412SP) 412-040-002-series 3100 $4,356 5 6000 $ 16,485 11
Transmission Assembly (412HP/412EP) 412-040-004-series 2500 $4,356 5 5000 $ 16,816
Hub & Sleeve Assy 412-010-401-series 2500 $ 5,903 6
Main Driveshaft Assy 212-040-005-series 2500 $ 2,590 3
Swashplate & Support 412-010-402-series 2500 $ 3,421 5
Oil Cooler Blower Assy 209-062-502-series O/C $ 1,278 3
T/R Gearbox 212-040-004-series 2500 $1,331 2 5000 $ 2,143 5
42 /Gearbox 212-040-003-series 2500 $822 2 5000 $ 1,516 5
Tail Rotor Hub Assy 212-011-701-series 2500 $ 3,155 3
Driveshaft Hangar Assy 412-040-600-series 3000 $ 1,609 2
UH-1H (See Note)
Main Rotor Hub 204-011-101--3/-5/-9 1100 $ 7,257 7
Main Rotor Hub 204-012-101-series 1200 $ 7,257 7
Transmission 204-040-016-005 2000 $ 15,986 11
Main Input Quill Assy 205-040-263-3/-111 1000 $ 1,269 3
Mast Assembly 204-040-366-9/-15 1500 $ 1,379 4
42/Gearbox 204-040-003-series 1500 $ 2,282 5
Tail Rotor Gearbox 204-040-012-001 600 $ 1,669 5
Tail Rotor Gearbox 204-040-012-007/-13 1200 $ 1,669 5
Swashplate and Support 204-011-400-1/-7/-9 1100 $ 2,322 5
Swashplate and Support 204-011-400-11 1200 $ 2,322 5
Scissors & Sleeve Assy 204-011-401-1/-7/-9 1100 $ 3,155 4
Scissors & Sleeve Assy 204-011-401-011 1200 $ 3,155 4
Note: Source for overhaul intervals is Interagency Committee for Aviation Policy (ICAP) inspection planning guide (March 2002).
Price List Effective December 1, 2003
In
t er
Intermediate and Heavy Helicopter
m
ed
ia
R&O Prices
te
s
Bell Helicopter offers repair and overhaul of the Intermediate and Heavy Helicopter
components listed here:
Bell 222 Series
Bell 230
Bell 430
Bell 214B
Bell 214ST
These prices are for the most basic overhaul services. Many overhauls will require additional
components not included in the published price. Actual overhaul cost of any component will be
determined upon a complete teardown and inspection. Rough Order of Magnitude (ROM) or
Not-To-Exceed pricing will be provided upon request..
Customers will be notified of costs associated with replacement of life limited parts and other
replacement parts necessary to meet Bell CR&O Manual requirements. Bell Helicopter will not
complete any additional repair/overhaul work without having documented customer authorization.
Replaced parts can be returned to the customer upon receiving a written request. However, all
returned parts will be permanently altered or dismembered to comply with un-airworthy part
policies. These replaced parts will be returned at the customers expense.
Through our dedicated Repair and Overhaul facility, Bell pledges to provide competitive prices and
responsive turn-times to get you flying again quickly. Our staff will work with you to minimize your
down-time.
Estimated turn times published in the component price list are working days that the
COMPONENTS ARE ACTUALLY IN-WORK AT BELL TENNESSEE. The working days
published DO NOT include time in transit or time in customs.
BELL EXPERIENCE AND QUALITY PLUS COMPETITIVE PRICING MAKE US A FIRST CHOICE FOR COMPONENT
OVERHAUL!
(over)
INSP. INSP. EST. O/H OVERHAUL EST.
COMPONENT PART NUMBER (HRS) PRICE TURN TIME (HRS) PRICE TURN TIME
(Working Days) (Working Days)
These prices are for the most basic overhaul services. Many overhauls will require additional
components not included in the published price. Actual overhaul cost of any component will be
determined upon a complete teardown and inspection. Rough Order of Magnitude (ROM) or
Not-To-Exceed pricing will be provided upon request..
Customers will be notified of additional costs associated with replacement of life limited parts and
other replacement parts necessary to meet Bell CR&O Manual requirements. Bell Helicopter will not
complete any additional repair/overhaul work without having documented customer authorization.
Replaced parts can be returned to the customer upon receiving written request. However, all returned
parts will be permanently altered or dismembered to comply with un-airworthy part policies. These
replaced parts will be returned at the customers expense.
Through our dedicated Repair and Overhaul facility, Bell pledges to provide competitive prices and
responsive turn-times to get you flying again quickly. Our staff will work with you to minimize your
down-time.
Estimated turn times published in the component price list are working days that the
COMPONENTS ARE ACTUALLY IN-WORK AT BELL TENNESSEE. The working days
published DO NOT include time in transit or time in customs.
BELL EXPERIENCE AND QUALITY PLUS COMPETITIVE PRICING MAKE US A FIRST CHOICE FOR COMPONENT
OVERHAUL!
(over)
INSP. INSP. EST. O/H OVERHAUL EST.
COMPONENT PART NUMBER (HRS) PRICE TURN TIME (HRS) PRICE TURN TIME
(Working Days) (Working Days)
Model 206A/B
M/R Hub Assembly (BIG HUB) 206-011-100-series 1200 $1,630 2 2400 $4,066 6
M/R Hub Assembly (Small Hub) 206-010-100-series 1200 $3,943 6
Swashplate & Support 206-010-450-series 4800 $3,531 4
Mast Assembly 206-040-002-series 1500 $567 1 3000 $1,030 3
Transmission 206-040-002-series 1500 $1,035 2 4500 $4,692 5
Freewheeling Assembly 206-040-230-series 1500 $917 1 3000 $3,633 4
Freewheeling Assembly 206-040-270-series 1500 $917 1 3000 $3,633 4
Tail Rotor Hub 206-011-801-series 2500 $921 3
Tail Rotor Hub 206-011-810-series 2500 $921 3
Tail Rotor Gearbox 206-040-400-series 3000 $814 2 6000 $2,000 3
Tail Rotor Gearbox 206-961-401-series 3000 $814 2 6000 $2,000 3
Tail Rotor Gearbox 206-040-402-series 3000 $814 2 6000 $2,236 3
Model 206L Series
Swashplate & Support 206-010-450-series 4800 $3,531 4
Main Rotor Hub 206-011-100-series 1200 $1,630 2 2400 $4,066 6
Tail Rotor Hub 206-011-810-series 2500 $921 3
Transmission 206-040-004-series 1500 $1,200 2 4500 $5,051 6
Main Rotor Mast 206-040-014-101 1500 $567 1 3000 $1,030 3
Main Rotor Mast L-3 L-4 206-040-014-107 $1,169 3
Freewheeling Assembly 206-040-270-series 1500 $917 1 3000 $3,633 4
Tail Rotor Gear Box 406-040-402-series 3000 $814 2 6000 $2,236 3
F/W Assy Pre TB 206L-02-208 406-040-500-series 3000 $3,495 4
F/W Assy Post TB 206L-02-208 406-040-500-series 3000 $3,424 4
Model 407
Hub Assembly 407-010-100-103 2500 $7,613 10
Swashplate & Support 406-010-401-115 2500 $4,358 5
Mast Assembly 407-040-011-101 2500 $1,667 4
Transmission 407-040-006-103 2500 $5,269 7
Freewheeling Assy 406-040-500-123 2500 $3,424 4
Rotor Brake Caliper 206-340-301-103 2500 $2,507 3
Tail Rotor Hub 407-012-101-103 2500 $2,960 3
Tail Rotor Gearbox 406-040-400-115 2500 $3,967 4
Model 427
Hub Assembly 427-010-100-103 2500 $8,640 10
Swashplate & Support 427-010-401-101 2500 $6,122 5
Mast Assembly 427-040-011-101 3000 $2,675 4
Transmission 427-040-006-series 3000 $18,940 10
Rotor Brake Disk 427-340-350-101 5000 $371 2
Rotor Brake Caliper (With Limit Switches) 407-340-352-series 5000 $1,071 3
Shaft & Bearing Hanger Assembly 407-040-302-series 3000 $1,478 2
Tail Rotor Hub 407-012-101-107 2500 $2,960 3
Tail Rotor Gearbox 427-042-400-105 1800 $3,967 4
Model OH-58 (See Note)
Hub Assembly 206-010-100-series 1200 $3,943 6
Swashplate & Support 206-010-450-series O/C $3,531 4
Mast Assembly 206-040-003-series 3000 $1,030 3
Transmission 206-040-002-series O/C $4,692 5
Freewheeling Assembly 206-040-230-series 3000 $3,633 4
Tail Rotor Hub 206-010-701-series O/C $921 3
Tail Rotor Gearbox 206-040-40X-series 2400 $2,000 3
Note: Source for overhaul intervals is Interagency Committee for Aviation Policy (ICAP) inspection planning guide (March 2002).
Price List Effective December 1, 2003