Professional Documents
Culture Documents
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and Cree, Inc.
XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLAMP ® XP-E2 LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Flux Characteristics - White.................................................................................................................................................................................... 4
Flux Characteristics - Color.................................................................................................................................................................................. 10
Relative Spectral Power Distribution................................................................................................................................................................... 16
Relative Flux vs. Junction Temperature............................................................................................................................................................... 17
Electrical Characteristics - White......................................................................................................................................................................... 18
Electrical Characteristics - Color.......................................................................................................................................................................... 18
Relative Flux vs. Current - White........................................................................................................................................................................... 19
Relative Flux vs. Current - Color........................................................................................................................................................................... 19
Relative Chromaticity vs. Current and Temperature........................................................................................................................................... 20
Typical Spatial Distribution................................................................................................................................................................................... 21
Thermal Design..................................................................................................................................................................................................... 22
Performance Groups - Luminous Flux................................................................................................................................................................. 24
Performance Groups - Radiant Flux..................................................................................................................................................................... 25
Performance Groups - Chromaticity.................................................................................................................................................................... 26
Performance Groups - Dominant Wavelength.................................................................................................................................................... 29
Performance Groups - Peak Wavelength............................................................................................................................................................ 30
Performance Groups - Forward Voltage.............................................................................................................................................................. 30
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve............................................................................................................. 31
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 32
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 33
Cree’s PC Amber Kit Plotted on the 1931 CIE Curve........................................................................................................................................... 34
Cree’s 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................................. 35
Cree’s Standard Chromaticity Kits....................................................................................................................................................................... 36
Bin and Order Code Formats................................................................................................................................................................................ 37
Reflow Soldering Characteristics......................................................................................................................................................................... 38
Notes..................................................................................................................................................................................................................... 39
Mechanical Dimensions....................................................................................................................................................................................... 41
Tape and Reel........................................................................................................................................................................................................ 42
Packaging.............................................................................................................................................................................................................. 43
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
2
XLAMP ® XP-E2 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point - white, royal blue, blue °C/W 9
Thermal resistance, junction to solder point - photo red, far red °C/W 8
Viewing angle (FWHM) - amber, red-orange, red, photo red degrees 130
ESD withstand voltage (HBM per Mil-Std-883D)- white, royal blue, blue, green V 8000
ESD classification (HBM per Mil-Std-883D) - PC amber, amber, red-orange, red, photo red, far red Class 2
Reverse voltage V 5
Forward voltage (@ 350 mA, 25 °C) - royal blue, blue V 3.1 3.5
Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red, V 2.2 2.6
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
3
XLAMP ® XP-E2 LED
The following tables provide order codes for XLamp XP-E2 white LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 37). For definitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 36).
Calculated Minimum
Minimum Luminous Flux @
Chromaticity Luminous Flux (lm)** Order Codes
350 mA
@ 85 °C
Flux (lm) Flux (lm)
Kit CCT Code 700 mA 1.0 A 70 CRI Typical
@ 85 °C @ 25 °C*
R4 130 151 223 284 XPEBWT-L1-0000-00G51
R3 122 142 209 266 XPEBWT-L1-0000-00F51
51 6200 K R2 114 132 195 249 XPEBWT-L1-0000-00E51
Q5 107 124 183 233 XPEBWT-L1-0000-00D51
Q4 100 116 171 218 XPEBWT-L1-0000-00C51
R4 130 151 223 284 XPEBWT-L1-0000-00G53
R3 122 142 209 266 XPEBWT-L1-0000-00F53
53 6000 K R2 114 132 195 249 XPEBWT-L1-0000-00E53
Q5 107 124 183 233 XPEBWT-L1-0000-00D53
Q4 100 116 171 218 XPEBWT-L1-0000-00C53
R4 130 151 223 284 XPEBWT-L1-0000-00G50
R3 122 142 209 266 XPEBWT-L1-0000-00F50
50 6200 K R2 114 132 195 249 XPEBWT-L1-0000-00E50
Q5 107 124 183 233 XPEBWT-L1-0000-00D50
Q4 100 116 171 218 XPEBWT-L1-0000-00C50
R4 130 151 223 284 XPEBWT-L1-0000-00GE1
R3 122 142 209 266 XPEBWT-L1-0000-00FE1
E1 6500 K R2 114 132 195 249 XPEBWT-L1-0000-00EE1
Q5 107 124 183 233 XPEBWT-L1-0000-00DE1
Q4 100 116 171 218 XPEBWT-L1-0000-00CE1
R4 130 151 223 284 XPEBWT-L1-0000-00GE2
R3 122 142 209 266 XPEBWT-L1-0000-00FE2
E2 5700 K R2 114 132 195 249 XPEBWT-L1-0000-00EE2
Q5 107 124 183 233 XPEBWT-L1-0000-00DE2
Q4 100 116 171 218 XPEBWT-L1-0000-00CE2
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
4
XLAMP ® XP-E2 LED
Calculated Minimum
Chromaticity Minimum Luminous Flux @ 350 mA Luminous Flux (lm)** Order Codes
@ 85 °C
Flux (lm) Flux (lm)
Kit CCT Code 700 mA 1.0 A 70 CRI Typical 75 CRI Typical 80 CRI Minimum
@ 85 °C @ 25 °C*
R4 130 151 223 284 XPEBWT-01-0000-00GE3
R3 122 142 209 266 XPEBWT-01-0000-00FE3 XPEBWT-L1-0000-00FE3
E3 5000 K R2 114 132 195 249 XPEBWT-01-0000-00EE3 XPEBWT-L1-0000-00EE3
Q5 107 124 183 233 XPEBWT-L1-0000-00DE3
Q4 100 116 171 218 XPEBWT-L1-0000-00CE3
R4 130 151 223 284 XPEBWT-01-0000-00GF4
R3 122 142 209 266 XPEBWT-01-0000-00FF4 XPEBWT-L1-0000-00FF4
F4 4750 K R2 114 132 195 249 XPEBWT-01-0000-00EF4 XPEBWT-L1-0000-00EF4
Q5 107 124 183 233 XPEBWT-L1-0000-00DF4
Q4 100 116 171 218 XPEBWT-L1-0000-00CF4
R4 130 151 223 284 XPEBWT-01-0000-00GE4
R3 122 142 209 266 XPEBWT-01-0000-00FE4 XPEBWT-L1-0000-00FE4
E4 4500 K R2 114 132 195 249 XPEBWT-01-0000-00EE4 XPEBWT-L1-0000-00EE4
Q5 107 124 183 233 XPEBWT-L1-0000-00DE4
Q4 100 116 171 218 XPEBWT-L1-0000-00CE4
R3 122 142 209 266 XPEBWT-01-0000-00FF5
R2 114 132 195 249 XPEBWT-01-0000-00EF5 XPEBWT-L1-0000-00EF5
F5 4250 K Q5 107 124 183 233 XPEBWT-01-0000-00DF5 XPEBWT-L1-0000-00DF5
Q4 100 116 171 218 XPEBWT-L1-0000-00CF5
Q3 93.9 109 161 205 XPEBWT-L1-0000-00BF5
R3 122 142 209 266 XPEBWT-01-0000-00FE5
R2 114 132 195 249 XPEBWT-01-0000-00EE5 XPEBWT-L1-0000-00EE5 XPEBWT-H1-0000-00EE5
E5 4000 K Q5 107 124 183 233 XPEBWT-01-0000-00DE5 XPEBWT-L1-0000-00DE5 XPEBWT-H1-0000-00DE5
Q4 100 116 171 218 XPEBWT-L1-0000-00CE5 XPEBWT-H1-0000-00CE5
Q3 93.9 109 161 205 XPEBWT-L1-0000-00BE5 XPEBWT-H1-0000-00BE5
Q5 107 124 183 233 XPEBWT-L1-0000-00DZ5 XPEBWT-H1-0000-00DZ5
Z5 4000 K Q4 100 116 171 218 XPEBWT-L1-0000-00CZ5 XPEBWT-H1-0000-00CZ5
Q3 93.9 109 161 205 XPEBWT-L1-0000-00BZ5 XPEBWT-H1-0000-00BZ5
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
5
XLAMP ® XP-E2 LED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C**
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-01-
R3 122 142 209 266
0000-00FF6
XPEBWT-01- XPEBWT-L1-
R2 114 132 195 249
0000-00EF6 0000-00EF6
XPEBWT-01- XPEBWT-L1- XPEBWT-H1-
Q5 107 124 183 233
0000-00DF6 0000-00DF6 0000-00DF6
F6 3750 K
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CF6 0000-00CF6
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BF6 0000-00BF6
XPEBWT-L1- XPEBWT-H1-
Q2 87.4 102 150 191
0000-00AF6 0000-00AF6
XPEBWT-01-
R3 122 142 209 266
0000-00FE6
XPEBWT-01- XPEBWT-L1-
R2 114 132 195 249
0000-00EE6 0000-00EE6
XPEBWT-01- XPEBWT-L1- XPEBWT-H1-
Q5 107 124 183 233
0000-00DE6 0000-00DE6 0000-00DE6
E6 3500 K
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CE6 0000-00CE6
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BE6 0000-00BE6
XPEBWT-L1- XPEBWT-H1-
Q2 87.4 102 150 191
0000-00AE6 0000-00AE6
XPEBWT-L1-
Q5 107 124 183 233
0000-00DZ6
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CZ6 0000-00CZ6
Z6 3500 K
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BZ6 0000-00BZ6
XPEBWT-L1- XPEBWT-H1-
Q2 87.4 102 150 191
0000-00AZ6 0000-00AZ6
XPEBWT-01- XPEBWT-L1-
R2 114 132 195 249
0000-00EF7 0000-00EF7
XPEBWT-01- XPEBWT-L1- XPEBWT-H1-
Q5 107 124 183 233
0000-00DF7 0000-00DF7 0000-00DF7
XPEBWT-L1- XPEBWT-H1-
F7 3250 K Q4 100 116 171 218
0000-00CF7 0000-00CF7
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BF7 0000-00BF7
XPEBWT-L1- XPEBWT-H1-
Q2 87.4 102 150 191
0000-00AF7 0000-00AF7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
6
XLAMP ® XP-E2 LED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C**
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-01- XPEBWT-L1-
R2 114 132 195 249
0000-00EE7 0000-00EE7
XPEBWT-01- XPEBWT-L1- XPEBWT-H1-
Q5 107 124 183 233
0000-00DE7 0000-00DE7 0000-00DE7
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CE7 0000-00CE7
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BE7 0000-00BE7
E7 3000 K
XPEBWT-L1- XPEBWT-H1- XPEBWT-P1- XPEBWT-U1-0000-
Q2 87.4 102 150 191
0000-00AE7 0000-00AE7 0000-00AE7 00AE7
XPEBWT-P1- XPEBWT-U1-
P4 80.6 93.6 138 176
0000-009E7 0000-009E7
XPEBWT-P1- XPEBWT-U1-
P3 73.9 85.8 127 161
0000-008E7 0000-008E7
XPEBWT-P1- XPEBWT-U1-
P2 67.2 78.0 115 147
0000-007E7 0000-007E7
XPEBWT-L1-
Q5 107 124 183 233
0000-00DZ7
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CZ7 0000-00CZ7
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BZ7 0000-00BZ7
XPEBWT-L1- XPEBWT-H1- XPEBWT-P1-
Z7 3000 K Q2 87.4 102 150 191
0000-00AZ7 0000-00AZ7 0000-00AZ7
XPEBWT-P1- XPEBWT-U1-
P4 80.6 93.6 138 176
0000-009Z7 0000-009Z7
XPEBWT-P1- XPEBWT-U1-
P3 73.9 85.8 127 161
0000-008Z7 0000-008Z7
XPEBWT-P1- XPEBWT-U1-
P2 67.2 78.0 115 147
0000-007Z7 0000-007Z7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
7
XLAMP ® XP-E2 LED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C**
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-L1-
Q5 107 124 183 233
0000-00DF8
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CF8 0000-00CF8
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BF8 0000-00BF8
XPEBWT-L1- XPEBWT-H1- XPEBWT-P1-
Q2 87.4 102 150 191
0000-00AF8 0000-00AF8 0000-00AF8
F8 2850 K
XPEBWT-L1- XPEBWT-H1- XPEBWT-P1- XPEBWT-U1-
P4 80.6 93.6 138 176
0000-009F8 0000-009F8 0000-009F8 0000-009F8
XPEBWT-P1- XPEBWT-U1-
P3 73.9 85.8 127 161
0000-008F8 0000-008F8
XPEBWT-P1- XPEBWT-U1-
P2 67.2 78 115 147
0000-007F8 0000-007F8
XPEBWT-P1- XPEBWT-U1-
N4 62 72 106 135
0000-006F8 0000-006F8
XPEBWT-L1-
Q5 107 124 183 233
0000-00DE8
XPEBWT-L1- XPEBWT-H1-
Q4 100 116 171 218
0000-00CE8 0000-00CE8
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BE8 0000-00BE8
XPEBWT-L1- XPEBWT-H1-
Q2 87.4 102 150 191
0000-00AE8 0000-00AE8
E8 2700 K
XPEBWT-L1- XPEBWT-H1- XPEBWT-P1- XPEBWT-U1-
P4 80.6 93.6 138 176
0000-009E8 0000-009E8 0000-009E8 0000-009E8
XPEBWT-P1- XPEBWT-U1-
P3 73.9 85.8 127 161
0000-008E8 0000-008E8
XPEBWT-P1- XPEBWT-U1-
P2 67.2 78 115 147
0000-007E8 0000-007E8
XPEBWT-P1- XPEBWT-U1-
N4 62 72 106 135
0000-006E8 0000-006E8
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
8
XLAMP ® XP-E2 LED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C**
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-L1-
Q4 100 116 171 218
0000-00CZ8
XPEBWT-L1- XPEBWT-H1-
Q3 93.9 109 161 205
0000-00BZ8 0000-00BZ8
XPEBWT-L1- XPEBWT-H1-
Q2 87.4 102 150 191
0000-00AZ8 0000-00AZ8
XPEBWT-L1- XPEBWT-H1- XPEBWT-P1-
Z8 2700 K P4 80.6 93.6 138 176
0000-009Z8 0000-009Z8 0000-009Z8
XPEBWT-P1- XPEBWT-U1-
P3 73.9 85.8 127 161
0000-008Z8 0000-008Z8
XPEBWT-P1- XPEBWT-U1-
P2 67.2 78 115 147
0000-007Z8 0000-007Z8
XPEBWT-P1- XPEBWT-U1-
N4 62 72 106 135
0000-006Z8 0000-006Z8
XPEBWT-L1- XPEBWT-H1-
P3 73.9 85.8 127 161
0000-008EA 0000-008EA
XPEBWT-L1- XPEBWT-H1-
EA 2200 K P2 67.2 78 115 147
0000-007EA 0000-007EA
XPEBWT-L1- XPEBWT-H1-
N4 62 72 106 135
0000-006EA 0000-006EA
XPEBWT-L1- XPEBWT-H1-
P3 73.9 85.8 127 161
0000-008ZA 0000-008ZA
XPEBWT-L1- XPEBWT-H1-
ZA 2200 K P2 67.2 78 115 147
0000-007ZA 0000-007ZA
XPEBWT-L1- XPEBWT-H1-
N4 62 72 106 135
0000-006ZA 0000-006ZA
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
9
XLAMP ® XP-E2 LED
The following tables provide order codes for XLamp XP-E2 color LEDs. For a complete description of the order-code nomenclature, please
see the Bin and Order Code Formats section (page 37).
Note:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
10
XLAMP ® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
11
XLAMP ® XP-E2 LED
Q2 87.4 XPEBPA-L1-0000-00A01
Q3 93.9 XPEBPA-L1-0000-00B01
PC Amber Y2
Q4 100 XPEBPA-L1-0000-00C01
Q5 107 XPEBPA-L1-0000-00D01
Note:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
12
XLAMP ® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
13
XLAMP ® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
14
XLAMP ® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
15
XLAMP ® XP-E2 LED
100
90
Relative Radiant Power (%)
80
70
60
Cool White
50
Warm White
40
30
20
10
0
380 430 480 530 580 630 680 730 780
100
Royal Blue
80
Blue
Relative Radiant Power (%)
Green
60 PC Amber
Amber
Red-Orange
40
Red
Photo Red
20 Far Red
0
380 430 480 530 580 630 680 730 780
Wavelength (nm)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
16
XLAMP ® XP-E2 LED
120
100
Relative Luminous Flux (%)
80
60 White
40
20
Relative 25
Flux Output
50
vs. Junction
75
Temperature
100
Junction Temperature (ºC)
125 150
100
90
80
Relative Radient Flux (%)
70
60 Royal Blue
50 Photo Red
40
Far Red
30
20
10
0
25 50 75 100 125 150
Relative Flux Output vs. Junction Temperature
Junction Temperature (ºC)
100
90
80
Relative Luminous Flux (%)
70
Blue
60
Green
50 PC Amber
40 Amber
Red-Orange, Red
30
20
10
0
25 50 75 100 125 150
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
17
XLAMP ® XP-E2 LED
ELECTRICAL CHARACTERISTICS
Electrical Characteristics (Tj = 25ºC) - WHITE (TJ = 85 °C)
1000
900
800
700
Forward Current (mA)
600
500 White
400
300
200
100
0
2.7 2.8 2.9 3.0 3.1 3.2
Forward Voltage (V)
Electrical Characteristics (Tj = 85ºC)
no far red point at 300 mA, per RE XPEB EPR FAR Timeline.msg
ELECTRICAL CHARACTERISTICS - COLOR (TJ = 25 °C)
1000
900
800
Royal Blue, Blue
Forward Current (mA)
700
Green
600
PC Amber
500
Amber, Red-Orange, Red
400
Photo Red
300 Far Red
200
100
0
1.65 1.90 2.15 2.40 2.65 2.90 3.15 3.40 3.65
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
18
XLAMP ® XP-E2 LED
200
Relative Luminous Flux (%)
150
White
100
50
0
0 100 200 300 400 500 600 700 800 900 1000
Forward Current (mA)
Relative Intensity vs. Current (Tj = 25ºC)
RELATIVE FLUX VS. CURRENT - COLOR (TJ = 25 °C)
300
250
Relative Radiant Flux (%)
200
Royal Blue
150 Photo Red
Far Red
100
50
250
Relative Luminous Flux (%)
200
Blue
Green
150 PC Amber
Amber
Red-Orange, Red
100
50
0
0 100 200 300 400 500 600 700 800 900 1000
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
19
XLAMP ® XP-E2 LED
0.020
T = 85 °C
0.015
J
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
Relative0Chromaticity
100
Vs.200 300
Temperature WW400 500 600 700 800 900 1000
Current (mA)
0.020
I = 350 mA
0.015
F
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 25 50 75 100 125 150
Tsp (°C)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
20
Typical Spatial Radiation Pattern XLAMP ® XP-E2 LED
100
Relative Luminous Intensity (%)
80
60
White
40
20
Angle (°)
100
Relative Luminous Intensity (%)
80
20
0
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
21
XLAMP ® XP-E2 LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Thermal Design - royal blue - same as blue
White Royal Blue, Blue
1200 1200
1000 1000
Maximum Current (mA)
600 600
400 400
Rj-a = 10°C/W Rj-a = 10°C/W
Rj-a = 15°C/W Rj-a = 15°C/W
200 200
Rj-a = 20°C/W Rj-a = 20°C/W
Rj-a = 25°C/W Rj-a = 25°C/W
0 0
Thermal Design - green 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
Ambient Temperature (ºC)
Ambient Temperature (ºC)
Thermal Design - PC amber
Green PC Amber
1200 1200
1000 1000
Maximum Current (mA)
Maximum Current (mA)
800 800
600 600
400 400
Rj-a = 20°C/W Rj-a = 10°C/W
Rj-a = 25°C/W Rj-a = 15°C/W
200 200
Rj-a = 30°C/W Rj-a = 20°C/W
Rj-a = 35°C/W Rj-a = 25°C/W
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
1000 1000
Maximum Current (mA)
800 800
600 600
400 400
Rj-a = 10°C/W Rj-a = 10°C/W
Rj-a = 15°C/W Rj-a = 15°C/W
200 200
Rj-a = 20°C/W Rj-a = 20°C/W
Rj-a = 25°C/W Rj-a = 25°C/W
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
Ambient Temperature (ºC) Ambient Temperature (ºC)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
22
XLAMP ® XP-E2 LED
1200 1200
1000 1000
Maximum Current (mA)
600 600
400 400
Rj-a = 10°C/W Rj-a = 10°C/W
Rj-a = 15°C/W Rj-a = 15°C/W
200 200
Rj-a = 20°C/W Rj-a = 20°C/W
Rj-a = 25°C/W Rj-a = 25°C/W
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
Ambient Temperature (ºC) Ambient Temperature (ºC)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
23
XLAMP ® XP-E2 LED
XLamp XP-E2 LEDs (except royal blue, photo red and far red) are tested for luminous flux and placed into one of the following luminous‑flux
groups:
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
24
XLAMP ® XP-E2 LED
XLamp XP-E2 royal blue and photo red LEDs are tested for radiant flux and placed into one the following bins:
XLamp XP-E2 far red LEDs are tested for radiant flux and sorted into one of the following radiant‑flux bins:
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
25
XLAMP ® XP-E2 LED
White XLamp XP-E2 LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the
following pages.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
26
XLAMP ® XP-E2 LED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
27
XLAMP ® XP-E2 LED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
28
XLAMP ® XP-E2 LED
XLamp XP-E2 PC amber LEDs are placed into the region defined by the following bounding coordinates.
Region x y
0.5469 0.4249
0.5700 0.4100
Y2
0.5900 0.4100
0.5610 0.4390
Color XLamp XP-E2 LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
29
XLAMP ® XP-E2 LED
Photo red and far red XLamp XP-E2 LEDs are tested for peak wavelength (PWL) and sorted into one of the PWL bins defined below.
P3 655 660
Photo Red
P4 660 665
P5 665 670
F2 720 725
F3 725 730
Far Red
F4 730 735
F5 735 740
Amber, red-orange, red, photo red and far red XLamp XP-E2 LEDs are tested for forward voltage and sorted into one of the forward voltage
bins defined below.
D 2.25 2.5
E 2.5 2.75
F 2.75 3.0
G 3.0 3.25
H 3.25 3.5
J 3.5 3.75
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
30
XLAMP ® XP-E2 LED
0.40
5000 K
0.39
0.38 5700 K
3S
0.37
6500 K 2T
0.36 3B
2S
2C
0.35 1T
8000 K 3A
2B
CCy
0.34 1S 2D
1C
2A 3R
0.33 0T 1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
0.45
2700 K
3000 K
0.44
0.43 3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2 8D4
CCy
3C
5A4 ANSI
5A1
4D C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.47
0.49
0.43
0.45
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.33
0.35
0.37
0.39
0.41
CCx
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
31
XLAMP ® XP-E2 LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.40 0.40
5000 K
5000 K
0.39 0.39
0.38 5700 K
0.38 5700 K
53
3S 3S
51
0.37 0.37
6500 K 6500 K 2T
2T
0.36 0.36 3B
2S 3B 2S
2C 0.35 2C
0.35 1T 1T
3A 8000 K 3A
8000 K 2B 2B
CCy
0.34 0.34 1S
CCy
1S 2D 1C 2D
1C
3R 2A 3R
2A 0T
0.33 0T 0.33 1B
1B
1D 2U 1D 2U
0S 0C ANSI 0S 0C 2R ANSI
0.32 1A
2R 0.32 1A
1U C78.377A 1U C78.377A
0B 0B
0D 0D
0.31 1R
0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
3S
0.37
6500 K 50 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
0.34 1S 2D
1C
CCy
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
0.40
0.40
5000 K 5000 K
0.39 0.39
0.37
3S
0.37 E2 3S
6500 K 2T 6500 K 2T
0.36 0.36
E1 2S 3B 3B
2S
0.35 2C 2C
1T 0.35 1T
8000 K 3A 3A
2B 8000 K 2B
CCy
CCy
0.34 1S 2D 0.34 1S
1C 1C 2D
2A 3R
0T 2A 3R
0.33 1B 0T
1D 2U 0.33 1B
1D 2U
0S 0C 2R ANSI
0.32 1A 0S 0C 2R ANSI
C78.377A 0.32 1A
1U C78.377A
0B 0D 1U
0.31 0B
1R 0.31 0D
0A 1R
0U 0A
0.30 0U
0R 0.30
0R
0.29
0.29
0.28
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
CCx
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
32
XLAMP ® XP-E2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
E8
E7
0.43
3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2
E6
7B3 8C4
8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
8A3
E5
6B3 7B1 8A2
6C4 7D3
0.40 6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
E4
6D2 7A4
5B2 5C1 6A3 7A1
6D4
5B4 5D3 6A2
0.38 6D1
5B1 5D2 6A4
E3
4C
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43 3500 K
F8
F7
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
F6
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40
F5
6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
CCy
6D3 7D4
0.39 5B3 5C4 6B1
6D2 7A4
7D1
7A1
F4
5B2 5C1 6A3
6D4
5B4 5D3 6A2
0.38 5B1 5D2
6D1
4C 6A4
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
33
XLAMP ® XP-E2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
0.46
0.45
2700 K
3000 K
0.44
Z8
0.43 3500 K
Z7 8C2
8C3
Z6
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
Z5
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2 8D4
6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
0.44
Y2
CCy
0.43
0.42
0.41
0.40
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
CCx
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
34
XLAMP ® XP-E2 LED
CREE’S 2200 K CCT WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.45
0.44
2700 K
2450 K EA 2200 K
8D2
8A3
8A2
7D3 AA1 AA4 AD1 AD4
0.40
8D4
8D1
8A4
8A1
0.39
0.38
0.37
0.36
0.44
0.45
0.46
0.53
0.54
0.47
0.48
0.49
0.50
0.51
0.52
0.55
CCx
0.45
0.44
2700 K
2450 K ZA 2200 K
8D2
8A3
8A2
7D3 AA1 AA4 AD1 AD4
0.40
8D4
8D1
8A4
8A1
0.39
0.38
0.37
0.36
0.44
0.45
0.46
0.53
0.54
0.47
0.48
0.49
0.50
0.51
0.52
0.55
CCx
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
35
XLAMP ® XP-E2 LED
The following table provides the chromaticity bins associated with chromaticity kits.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
36
XLAMP ® XP-E2 LED
XP-E2 bin codes and order codes are configured in the following manner:
Series Series
XPE = XP-E XPE = XP-E
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
37
XLAMP ® XP-E2 LED
In testing, Cree has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tS
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time IPC/JEDEC J-STD-020C
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
38
XLAMP ® XP-E2 LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-E2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
39
XLAMP ® XP-E2 LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
40
XLAMP ® XP-E2 LED
66 55 44 33
NOTICE
NOTICE
CREE
CREE CONFIDENTIAL.
CONFIDENTIAL. THIS
THIS PLOT
PLOT AND
AND THE
THE INFORMATION
INFORMATION
CONTAINED
CONTAINED WITHIN
WITHIN ARE
ARE THE
THE PROPRIETARY
PROPRIETARY AND
AND
CONFIDENTIAL
CONFIDENTIAL INFORMATION
INFORMATION OFOF CREE,
CREE, INC.
INC. THIS
THIS PLOT
PLOT
MECHANICAL
MAYDIMENSIONS
MAY NOT
NOT BEBE
UNAUTHORIZED
UNAUTHORIZED
COPIED,
COPIED, REPRODUCED
REPRODUCED
PERSON
PERSON THE
THEWITHOUT
OR
WRITTEN
WITHOUT
WRITTEN
OR DISCLOSED
DISCLOSED
CONSENT
CONSENT
TOTO ANY
ANY
OF
OF CREE
CREE INC.
INC.
Thermal vias, if present, are not shown on these drawings. 3.30
3.30
All measurements are ±.13 mm unless otherwise indicated.
.50.50
DD 2.30
2.30
3.45
3.45 2.26
2.26 .50.50
Anode .73.73
6 5 4 3
6 5 4 3
NOTICE
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OPTICAL
OPTICAL
CREE CONFIDENTIAL.
CONTAINED THIS PLOT
WITHIN AREAND
THETHE INFORMATION
PROPRIETARY ANDREFERENCE REV
CONTAINED WITHIN ARE INFORMATION
CONFIDENTIAL THE PROPRIETARY REFERENCE
AND INC. THIS
OF CREE, PLOT
CONFIDENTIAL INFORMATION
MAY NOT BE COPIED,OF CREE, INC. THIS
REPRODUCED PLOT
OR DISCLOSED TO ANY
MAY NOTUNAUTHORIZED
BE COPIED, REPRODUCED OR DISCLOSED
PERSON THE
WITHOUT TO ANY
WRITTEN CONSENT
UNAUTHORIZED PERSON
OF CREE INC. THE
WITHOUT
WRITTEN CONSENT
OF CREE INC. 3.45
3.45
3.30
3.30
.50
.50
D 4 3 2 12.30 2.30
D
4 3
3.45 2 2.26 REVISONS 1
3.45 2.26
R1.53
R1.53 .50
REVISONS .50
REV DESCRIPTION
.73 BY DATE APP'D
OPTICAL
OPTICAL REV .73DESCRIPTION .58.58 BY DATE APP'D
Y CC REFERENCE
REFERENCE 1.30
1.30
Top View Side View
OPTICAL
OPTICAL
3.30 REFERENCE
REFERENCE PRIMARY
PRIMARY
3.30
.50 3.30 REF.
3.45 .50 3.30 REF.
3.45 2.30 3.30
2.30 D
2.26 .50
2.26 .50 Cathode Cathode D
.73
.73
R1.53
R1.53
OPTICAL .50.50 .58 .64.64
OPTICAL .58
C REFERENCE .50.50 1.30
C REFERENCE .50.50
Electrically neutral 3.30 1.30
REF.
3.30 3.30 REF.
thermal pad 3.30
PRIMARY
PRIMARY
BB Electrically neutral
Anode Anode thermal pad
3 C
3.30
3.30 C .25.25
3.30
3.30
.58
.58
1.30
1.30
Bottom View Alternate Bottom View .75.75
ALTERNATIVE .64
.50 ALTERNATIVE
.50 PRIMARY .64
PRIMARY .50 .50
.50 .50
1.30
1.30 1.01
1.01
ALL
ALL DIM
DIME
2.30
2.30
3.30
3.30 3.30
3.30
B
B
UNLES
UNLESS
AA RECOMMENDED STENCIL PATTERN DIM
DIME
RECOMMENDED STENCIL PATTERN MILLIM
MILLIMET
3.30 .25
3.30 3.30 (HATCHED
(HATCHED AREA
AREA IS IS OPENING)
OPENING) .25 TOLER
TOLERAN
3.30 .64 .X
.64 RECOMMENDED
RECOMMENDED PCB
PCB SOLDER
SOLDER PAD
PAD .X
.50 X°
.50 THIRD
THIRD ANGLE
ANGLE PROJECTION
PROJECTION
.75 FOR
FOR S
SHE
.75 .X
.X
B .X
B X°
SURF
SURFAC
66 1.30 5 5 1.01 44 33
1.30 1.01 ALL DIME
2.30 ALL DIMENSIONS ARE
3.30 .25 2.30
3.30
3.30 3.30 .25 3.30
3.30
A
Recommended PCB Solder Pad Recommended Stencil Pattern UNLESS
UNLESS OTHERWISE
A RECOMMENDED STENCIL PATTERN DIMEN
.75 (Hatched
RECOMMENDED Area is PATTERN
STENCIL Open) DIMENSIONS ARE
MILLIMET
.75 (HATCHED AREA IS OPENING) MILLIMETERS AND AF
TOLERAN
(HATCHED AREA IS OPENING) TOLERANCE UNLESS .X
Copyright © 2012-2019 Cree, Inc. All
RECOMMENDED
rights reserved. The information
PCB SOLDER PAD .XX ± .25 .X
RECOMMENDED PCB SOLDERinPAD
this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
.XXX± .125X°
the UR logo are registered trademarks of UL LLC. THIRD ANGLE PROJECTION X° ± FOR
.5°SHE
THIRD ANGLE PROJECTION
1.01 FOR SHEET METAL.X P
1.01
2.30
ALL DIMENSIONS ARE ± .13MM
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
UNLESS OTHERWISE NOTED 41
.X ± 1.5 .X
.XX ± .75 .X
2.30 .XXX± .25 X°
3.30 X° ± .5°
Do ±0
.0
5
5 Y
1.7
E1
DETAIL B
SCALE 2 : 1
REF F(III)
XLAMP4.375
® Bo
XP-E2 LED
W
REF
4.375 Bo
R 0.2
TYPICAL
RE
X X Ko Y
F
D1
TAPE AND REEL SECTION Y-Y 1.5 MIN.
R 0.2
TYPICAL
RE
All Cree carrier tapesKo
conform to EIA-481D, Automated
Y Component Handling Systems Standard.
FR
D1 P1 Ao
All dimensions in mm.
2.2
SECTION Y-Y 1.5 MIN. REF 0.59
4
P2 Po
1.75 ±0.1
T 0.30 ±0.05 1.5 2.0 ±0.05 (I) 4.0 ±0.1 (II)
5
Do ±0
.05 Y CATHODE SIDE
E1
Ao 3.70 +/- 0.1
Bo 3.70 +/- 0.1
Ko 2.40 +0.0/-0.1
SECTION X-X F(III)
F 5.50 +/- 0.05
4.0±.1 1.5±.1 P1 8.00 +/- 0.1
W
REF W 12.00 +0.3/-0.1
4.375 Bo
1.75±.10 8.0±.1 2.5±.1
X X (I) Measured from centerline of sprocket hole
Ko Y
FR
SECTION Y-Y F
12.0 1.5 MIN. 5.50 +/- 0.05 REF 0.59 (IV) Other material available.
4
.0
P1 8.00 +/- 0.1
W 12.00 +0.3/-0.1
Anode Side
SECTION X-X(denoted by + and circle)
Loaded Pockets
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
Trailer
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
Leader
OF CREE, INC.
(1,000 Lamps)
160mm (min) of 400mm (min) of
empty pockets empty pockets with
sealed with tape at least 100mm
D
D
D
Cover Tape C D
16.40
Ø190
Ø61 ± 0.5
Pocket Tape
OD C
7.5
'' 12.40 +2.00
0
C MEASURED AT HUB
Ø13 13mm
Ø61 ± 0.5
7"
12.40
OD MEASURED AT INSIDE EDGE
7.5
'' 12.40 +2.00
0
MEASURED AT HUB
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
B
the UR logo are registered trademarks of UL LLC.
B DRAWN BY DATE
UNLESS OTHERWISE SPECIFIED
42
2012/5/25 4600 Silicon Drive
A DIMENSIONS ARE IN LIUDEZHI
Ø13
Durham, N.C 27703
MILLIMETERS & BEFORE FINISH. CHECK DATE
Phone (919) 361-4770
TOLERANCE UNLESS SPECIFIED:
.X ± 0.3 APPROVED DATE
A
.XX ± .13 TITLE
PACKAGING
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture Barrier Bag
Moisture Barrier Bag
Label
CREE Binwith
Code Cree Bin
Code,
& Qty,
Barcode LabelLot #
Label with Cree Bin Code,
Label with
Label with Cree Bin
Customer
Quantity, Reel ID Code,
P/N, Qty,Qty,
Lot #, Lot
PO # #
Packaged Reel
Patent Label
Boxed Reel
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
43