You are on page 1of 17

PARTS LIST NO.

50000120

LIST OF PARTS

FOR
SFC Outlet Module

Pitch 700

Version : 1.0 Name: Fritz Miller 10-JUL-03

Version : 10.0 Name: Jesper Barfoed 06-APR-09


No. 50000120

Parts List
Explanation

This Parts List consists of pages in the following sequence:

A) General Information Section:


Cover - identifies the specific parts list number for a complete machine or modification to an existing one.
Explanation - provides explanation of parts list structure.
Information - identifies serial number, nameplates, manufacturing and shipping information.

B) Index Section:
General Assembly - identified general assembly drawing(s) associated with parts list.
00.00, Revision List - identifies parts list pages revised after initial release.
00.01, Section List - identifies all sections of the parts list, including index sections that are applicable.
00.02, Drawing List - identifies drawings necessary for the erection of equipment.
00.03, SPL List - identifies all Separate Parts Lists used within parts list.
00.04, Motor List - identifies motors applicable to this equipment.
00.05, Air and Water Requirements - identifies air and water requirements for this equipment.
00.06, Lubricants - identifies lubricants required for this equipment.
00.07, Supplied Spares - identifies spare components that are supplied with this equipment as part of the order.
00.08, Recommended Spare Parts - identifies spare parts recommended to be on hand for future use.
00.09, Instruments - identifies instruments applicable to this equipment.
00.10, Instructions - identifies instructions applicable to installation, operation and maintenance.

Not all index sections are used on all parts lists. Index sections that do not apply will be identified
as "NOT USED".

The following pages are the main element sheets with the actual contents of the parts list.

C) Elements Listing Section:


This part of the parts list specifies the position number, description, quantity, drawing numbers or Separate part
lists numbers, supply code, designation code, manufacture data, pattern number, material and weight. The element
sections may be assigned any identification number between 01.00 and 99.99.

Element List - specifies information in the following sequence.

Line Numbers - located in the left and right margins. These numbers are the "main key" to the parts list. Each
number identifies a line of the parts list and corresponds to the last two digits of the eight digit position number
shown on assembly drawings. The first two digits identify the section, the next two digits identify the sub-section,
the next two digits identify the sheet, and the last two digits identify the line number of the parts list.
Column 1: Description - provides a brief description of a component of the equipment.
Column 2: No. Req. - provides the quantity of a component needed for the equipment.
Column 3: Drawing - provides the drawing number or separate parts list number associated to the component
described.
Column 4: Code Dim. Manuf. (Pat) - provides the code for purchased parts, bolts, screws, fittings, etc. (see
7.000001) or designation of elements. The Dim provides numerical values which must be used corresponding
to dimensions on a tabulated standard part drawing. The Manuf. specifies commercially available elements
according to a specific trade name and model. The (Pat) identifies the pattern number for an element.
Column 5: Mat. Code - states a material code of the material to be used for the element. The code refers to a
material data sheet in the F.L.Smidth material list. Alternatively a specific material specification may be included
on the drawing. If the two codes or specifications are different, this parts list specification shall be used.
Column 6: Total - indicates total weight for the quantity of components listed. The weight is rounded up to a whole
number.

All units of measure are in millimeters (mm) unless specified otherwise.


No. 50000120

Information Concerning
MANUFACTURE and SHIPMENT

"Number Required" applies to one machine only Weight of complete machine 4727 kg

INSTRUCTION MANUALS
"Mat." Code refers to F.L.Smidth Standard for manufacture and shipment designations
material specifications unless noted otherwise.
No.
SPECIAL TOOLS for manufacture 520530 GENERAL WORKSHOP INSTRUCTION

Drawing No. Used for drawing No. 19691 SHIPMENT

50.100.000 EQUIPMENT IDENTIFICATION MARKING

12951 PACKING

Nameplates, to be attached to machine

To be stamped
Serial Number Quantity Machine Type and Size To be placed on

The explanatory text for the purchase part code number (consisting of four digits + dimension) is included in the document:
"Code for Purchase Parts" No. 7.000001.

x) in a column on parts list sheets indicates that there is a pertinent remark at the foot of the sheet.

Open dimensions are specified on a drawing as a variable letter dimension. Specific order dimensions are contained in the parts list
dimension column.

DO NOT USE ANY PREVIOUSLY RECEIVED DOCUMENT, USE ONLY THE DOCUMENT RECEIVED WITH THE ORDER.
SFC Outlet Module 50000120
No. Section: 00.00
Pitch 700
Product code 000 Sheet no: 01
Revision list
Section number
Description and sheet number Revision number & revision date
01 DRAWING LIST 00.02 1 2 01
15-JUL-03 06-APR-09

02 Movable frame 01.01.01 2 3 4 5 6 7 02


20-JUL-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09 06-APR-09

03 Movable frame 01.01.02 1 2 3 4 5 6 03


29-APR-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09 06-APR-09

04 Rail guide 02.01.01 1 2 3 4 5 6 04


15-JUL-03 29-APR-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09

05 Rail guide 02.01.02 1 2 3 4 5 6


05
15-JUL-03 29-APR-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09

06 Supporting frame 03.01.02 1 2


06
29-APR-04 01-FEB-05

07 Supporting frame 03.01.03 2 3 4 5 6 7


07
20-JUL-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09 06-APR-09

08 Grate line 04.01.01 1 2 3 4 5 6


08
29-APR-04 20-JUL-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09

09 Grate line 04.01.02 1 2 3 4 5 6


09
29-APR-04 20-JUL-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09

10 Outlet 07.01.01 2 3 4 5 6 7
10
20-JUL-04 01-FEB-05 01-NOV-05 24-APR-07 19-MAR-09 06-APR-09

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23

24 24

25 25

26 26

27 27
Sign JJB Date 06-APR-09
SFC Outlet Module No. 50000120 Section: 00.01
Pitch 700
Product code Sheet no: 01
Section list 000
Section Number of Section
Description number sheets Weight kg Release date

01 REVISION LIST 00.00 1 10-JUL-03 01

02 SECTION LIST 00.01 1 10-JUL-03 02

03 DRAWING LIST 00.02 1 06-APR-09 03

04 SPL LIST 00.03 NOT USED 10-JUL-03


04

05 MOTOR LIST 00.04 NOT USED 10-JUL-03


05

06 AIR AND WATER REQUIREMENTS 00.05 NOT USED 10-JUL-03


06

07 LUBRICANTS 00.06 NOT USED 10-JUL-03


07

08 SUPPLIED SPARES 00.07 NOT USED 10-JUL-03


08

09 RECOMMENDED SPARE PARTS 00.08 NOT USED 10-JUL-03


09
10 INSTRUMENTS 00.09 NOT USED 10-JUL-03
10
11 INSTRUCTIONS 00.10 NOT USED 10-JUL-03
11
Movable frame 01.01 1 - 2 912 06-APR-09
12 12
Rail guide 02.01 1 - 2 146 19-MAR-09
13 13
Supporting frame 03.01 1 - 3 1951 06-APR-09
14 14
Grate line 04.01 1 - 2 1533 19-MAR-09
15 15
Lifting and Handling 05.01 1 84 15-JUL-03
16 16
Outlet 07.01 1 101 06-APR-09
17 17
18 18
19 19
20 20
21 21
22 22
23 23
10-JUL-03 JARG
X) in SUPPLY denotes split supply Original
15-JUL-03 FMM
1 General Revision
19-MAR-09 JJB
2 General Revision
06-APR-09 JJB
3 General Revision

Rev. Line Date Sign


SFC Outlet Module No. 50000120 Section: 00.02
Pitch 700
Drawing list Product code 000 Sheet no: 01

Description Drawing Remarks


Supporting frame assembly 10001450 03.01.01.01
01 01
Grate line movable assembly 10001813 04.01.01.01
02 02
Rail guide, assembly drawing 10004289 02.01.01.01
03 03
Lifting and handling diagram 10004702 05.01.01.01
04 04
Module assembly 10013634
05 05
Outlet assembly drawing 10013891 07.01.01.01
06 06
Movable frame assembly 10186198 01.01.01.01
07 07

08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
Original 10-JUL-03 JARG
15-JUL-03 FMM
1 General Revision
06-APR-09 JJB
2 General Revision

Rev. Line Date Sign


SFC Outlet Module No. 50000120 Section: 01.01
Pitch 700
Product code 000 Sheet no. 01
Movable frame
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Movable frame assembly 10186198


01 01
Pair of drive profiles 2 10002370 1100 264
02 PN 641175
02
Drive plate outlet 2 20000956 3110 424
03 PN 650745
03
Bolt 60 0213. M16×70 8.8 8
04 PN 548
04
Lock nut 60 4.209902 . M16×2 ISO 8 2
05 PN 32981
05
Washer 120 0704. M16 2
06 PN 12292
06

07 07

08 08

09 09
Drive cross profile 3 20000963 1100 36
10 PN 641625
10
Bolt 24 0213. M16×80 8.8 4
11 PN 9212
11
Lock nut 24 4.209902 . M16×2 ISO 8 1
12 PN 32981
12
Washer 48 0704. M16 1
13 PN 12292
13

14 14

15 15
Drive bracket 1 10013592 1100 126
16 PN 641640
16
Screw 24 0223. M16×60 8.8 3
17 PN 1401
17
Lock nut 24 4.209902 . M16×2 ISO 8 1
18 PN 32981
18
Washer 48 0704. M16 1
19 PN 12292
19

20 20
Shim 1 40006295 . T=1 mm 1100 0
21 PN 1815458
21
Shim 1 40006295 . T=2 mm 1100 1
22 PN 1815570
22
Shim 1 40006295 . T=3 mm 1100 1
23 PN 1815575
23
X) Line Sign JARG Date 10-JUL-03 Total 875
01-NOV-05 JMD
4 06 13 19
24-APR-07 MSB
5 05 06 12 13 17 18 19 21
24-APR-07 MSB
5 22 23
19-MAR-09 JJB
6 03 04 05 06 10 11 12 13
19-MAR-09 JJB
6 16 17 18 19 21
06-APR-09 JJB
7 01 03 06 13 19
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 01.01
Pitch 700
Product code 000 Sheet no. 02
Movable frame
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

01 01
Cylinder bracket - rod end 1 20002155 1100 14
02 PN 641655
02
Cylinder bracket - fixed end 1 20002152 1120 13
03 PN 641660
03
Bolt 4 0213. M24×80 8.8 1
04 PN 270851
04
Nut 4 0113. M24 8 0
05 PN 610
05
Striking plate 2 4.206943 5620 0
06 PN 32968
06
Bolt 4 7.000012 . M24×175 8.8 3
07 PN 97058
07
Striking plate 4 4.206942 5620 0
08 PN 32967
08
Locking plate 2 4.209899 1100 0
09 PN 32969
09
Screw 4 0303. M8×20 8.8 0
10 PN 12525
10
Clevis pin 2 30002054 2105 6
11 PN 641661
11
Washer 4 0702. M8 Steel 0
12 PN 190661
12

13 13

14 14

15 15

16 16

17 17

18 18

19 19
Grounding cable 1 4.702004 . L=1000 mm,120mm² 0
20 PN 641704
20
Screw 2 0223. M8×30 8.8 0
21 PN 13206
21
Nut 2 0113. M8 8 0
22 PN 251159
22
Washer 4 0702. M8 Steel 0
23 PN 190661
23
X) Line Sign JARG Date 10-JUL-03 Total 37
01-FEB-05 JMD
2 05 12 21 23
01-NOV-05 JMD
3 05 09 10 12 23
24-APR-07 MSB
4 05 09
19-MAR-09 JJB
5 02 03 04 05 06 07 08 09
19-MAR-09 JJB
5 10 11 12 20
06-APR-09 JJB
6 15 16 17 18
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 02.01
Pitch 700
Product code 000 Sheet no. 01
Rail guide
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Rail guide, assembly drawing 10004289


01 01

02 02
Slide system - INA 4 30007913 X) 36
03 PN 785070
03
Screw 20 0343. M12×30 8.8 1
04 PN 2517
04

05 05

06 06

07 07
Plate for guideway 4 30003521 1100 28
08 PN 641685
08
Screw 16 0223. M16×30 8.8 1
09 PN 1113
09

10 10
Bearing support plate 4 20000623 1100 16
11 PN 641703
11
Screw 8 0303. M12×20 8.8 0
12 PN 2444
12
Upper rubber plate 4 40000079 . 140 120 12 X) 0
13 PN 641719
13
Insolation bushing 16 40000092 . 20 17.8 27 X) 0
14 PN 641748
14
Lower rubber plate 8 40000080 . 130 42 12 X) 1
15 PN 641769
15
Retainer iron 8 40000090 2001 6
16 PN 641775
16

17 17
Bolt 16 40000078 2223 2
18 PN 641779
18
Striking plate for bolt 8 30000352 5620 1
19 PN 643620
19
Nut 16 7.000304 . M16×1.5 ISO 8 1
20 PN 253850
20

21 21
Set screw 8 0515. M5×8 45 H 0
22 PN 50277
22
Lubricating nipple 8 7.000110 . 1/4 . ISO 228/1-G 1/4 B Steel 0
23 PN 8782
23
X) Line Sign JARG Date 10-JUL-03 Total 93
03 : SEE DRAWING 01-FEB-05 JMD
3 12 23
13 14 15 : See drawing
01-NOV-05 JMD
4 03 12 23
24-APR-07 MSB
5 03 04 08 09 11 12 13 14
24-APR-07 MSB
5 15 16 18 19 20 22 23
19-MAR-09 JJB
6 03 04 08 09 11 12 13 14
19-MAR-09 JJB
6 15 16 18 19 20 22 23
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 02.01
Pitch 700
Product code 000 Sheet no. 02
Rail guide
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Protection box, bottom plate 8 30003520 1100 40


01 PN 643648
01
Protection box, side plate 8 30003519 5620 6
02 PN 643652
02
Protection box, end plate 8 40001021 5620 2
03 PN 643696
03

04 04
Scraper plate internal 8 40001018 5620 2
05 PN 643661
05
Scraper plate external 8 40001017 5620 2
06 PN 643664
06
Distance disc 32 40001022 5620 1
07 PN 643682
07
Screw 72 0303. M6×10 8.8 0
08 PN 1104
08
Screw 16 0303. M6×25 8.8 0
09 PN 33178
09
Lock Nut 16 . M6 . DIN 982 8 0
10 PN 273633
10

11 11

12 12

13 13

14 14

15 15
Screw 16 0303. M10×16 8.8 0
16 PN 55476
16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign JARG Date 10-JUL-03 Total 53
01-FEB-05 JMD
3 08 16
01-NOV-05 JMD
4 05 08 09 16
24-APR-07 MSB
5 01 02 03 05 06 07 08 09
24-APR-07 MSB
5 10 16
19-MAR-09 JJB
6 01 02 03 05 06 07 08 09
19-MAR-09 JJB
6 10 16
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 03.01
Pitch 700
Product code 000 Sheet no. 01
Supporting frame
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Supporting frame assembly 10001450


01 01

02 02
Bottom plate 1 10001428 1100 673
03 PN 641629
03

04 04

05 05
Side column 6 30000337 1100 432
06 PN 641632
06

07 07

08 08
Partition plate outlet 1 10012747 1100 184
09 PN 650742
09

10 10

11 11
End plate 1 30000338 1100 37
12 PN 641644
12

13 13

14 14
End column 1 30000339 1100 16
15 PN 641646
15

16 16

17 17
End column, wide 1 30000340 1100 17
18 PN 641651
18

19 19

20 20
Top angle 1 30000341 1100 11
21 PN 641652
21
Stiffening angle 2 2 30000348 1100 12
22 PN 641662
22
Stiffening angle 1 2 30003027 1100 12
23 PN 641679
23
X) Line Sign JARG Date 10-JUL-03 Total 1394

Rev. Line Date Sign


SFC Outlet Module No. 50000120 Section: 03.01
Pitch 700
Product code 000 Sheet no. 02
Supporting frame
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Cross 2 20000658 1100 54


01 PN 641683
01

02 02

03 03
Main cross support-traverse 1 20000670 1100 117
04 PN 641694
04

05 05

06 06
Main cross support-drive 1 20000669 1100 118
07 PN 641697
07

08 08

09 09
Main cross support 1 20000668 1100 103
10 PN 641705
10

11 11

12 12
Flat bar 6 5530. 90×15,L=265 1100 18
13 PN 641723
13

14 14

15 15
Flat bar 1 5530. 90×10,L=1118 1100 8
16 PN 641734
16

17 17

18 18
Gusse plate 12 40000097 1100 29
19 PN 641706
19

20 20

21 21
Supporting pad 6 40000098 1100 36
22 PN 641746
22

23 23
X) Line Sign JARG Date 10-JUL-03 Total 483
29-APR-04 JMD
1 04 07 10
01-FEB-05 JMD
2 13 16

Rev. Line Date Sign


SFC Outlet Module No. 50000120 Section: 03.01
Pitch 700
Product code 000 Sheet no. 03
Supporting frame
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Traverse plate 2 30000345 1100 64


01 PN 641750
01

02 02

03 03
Distance plate 1 40000063 1100 4
04 PN 641757
04

05 05

06 06
Screw 34 0223. M16×60 8.8 4
07 PN 1401
07
Lock nut 34 4.209902 . M16×2 ISO 8 1
08 PN 32981
08
Washer 68 0704. M16 1
09 PN 12292
09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign JARG Date 10-JUL-03 Total 74
20-JUL-04 JMD
2 07
01-FEB-05 JMD
3 07 09
01-NOV-05 JMD
4 09
24-APR-07 MSB
5 07 08 09
19-MAR-09 JJB
6 08 09
06-APR-09 JJB
7 09
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 04.01
Pitch 700
Product code 000 Sheet no. 01
Grate line
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Grate line movable assembly 10001813


01 01

02 02
Side tray 2 10001536 1100 222
03 PN 641619
03
Center tray 1 10001563 1100 211
04 PN 641624
04

05 05
C-profile 1200 12 30000356 X) 84
06 PN 641643
06

07 07

08 08
Low energy grate 56 1.208532 5620 504
09 PN 33211
09
Gasket 56 4.209907 X) 3
10 PN 33212
10

11 11
Screw 192 0223. M16×35 8.8 16
12 PN 1043
12
Screw 32 0223. M16×45 8.8 3
13 PN 639
13
Washer 224 0700. M16 Steel 2
14 PN 988
14

15 15

16 16
U-profile 10 20000691 . . . (KJ-0039) 5830 150
17 PN 641686
17
U-profile outlet 2 20000690 . . . (KJ-0041) 5830 38
18 PN 650777
18
Grate Protection Plate 56 30000260 X) 45
19 PN 480822
19

20 20

21 21

22 22

23 23
X) Line Sign JARG Date 10-JUL-03 Total 1278
06 19 : See drawing 01-FEB-05 JMD
3 12 13 14 19
10 : Ceramic paper 6mm
01-NOV-05 JMD
4 09 14 17 18
24-APR-07 MSB
5 03 04 06 09 10 12 13 14
24-APR-07 MSB
5 17 18 19
19-MAR-09 JJB
6 03 04 06 09 10 12 13 14
19-MAR-09 JJB
6 17 18 19
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 04.01
Pitch 700
Product code 000 Sheet no. 02
Grate line
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Movable cross bar 5 30000350 . . . (KJ-0037) 5830 175


01 PN 641702
01

02 02

03 03

04 04
Retainer bracket - movable 12 30000349 . . . (KJ-0036) 5830 72
05 PN 641732
05

06 06

07 07

08 08

09 09
Locking wedge 24 40000565 1100 7
10 PN 640305
10

11 11
Spring pin 24 0830. 8×70 0
12 PN 33377
12

13 13

14 14
Sealing paste (Silicone) 1 . . 0.25 liter X) 1
15 PN 270878
15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign JARG Date 10-JUL-03 Total 255
15 : Silicone, heat resistant up to 200°C continuously 29-APR-04 JMD
1 10 12 15
20-JUL-04 JMD
2 05 10 12
01-FEB-05 JMD
3 12
01-NOV-05 JMD
4 01 05 10
24-APR-07 MSB
5 01 05 10 12 15
19-MAR-09 JJB
6 01 05 10 12 15
Rev. Line Date Sign
SFC Outlet Module No. 50000120 Section: 05.01
Pitch 700
Product code 000 Sheet no. 01
Lifting and Handling
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Lifting and handling diagram 10004702


01 01

02 02
Inner Casing Lifting Lug 4 2.711444 1100 84
03 PN 218628
03

04 04

05 05

06 06

07 07

08 08

09 09

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign FMM Date 15-JUL-03 Total 84

Rev. Line Date Sign


SFC Outlet Module No. 50000120 Section: 07.01
Pitch 700
Product code 000 Sheet no. 01
Outlet
No. Drawing Mat Total
Description Req. Product No. Code Dim. Manuf. (Pat) code wgt kg

Outlet assembly drawing 10013891


01 01

02 02
U-profile sealing plate 2 30001701 . . . (KJ-0042) 5830 16
03 PN 650529
03
Bolt 8 0250. M16×40 4.6 1
04 PN 571
04
Nut 8 0100. M16 5 0
05 PN 1286
05
Washer 8 0704. M16 0
06 PN 12292
06

07 07

08 08
Shelfe for outlet 2 30001873 3100 30
09 PN 650539
09
Screw 8 0223. M16×60 8.8 1
10 PN 1401
10
Washer 8 0704. M16 0
11 PN 12292
11

12 12

13 13
Discharge plate 1 20002910 3100 53
14 PN 650568
14
Screw 4 0223. M12×55 8.8 0
15 PN 4493
15
Nut 4 0113. M12 8 0
16 PN 518
16
Washer 8 0704. M12 0
17 PN 33266
17

18 18

19 19

20 20

21 21

22 22

23 23
X) Line Sign JARG Date 10-JUL-03 Total 101
01-NOV-05 JMD
4 05 06 11 16 17
24-APR-07 MSB
5 03 04 05 06 09 10 11 14
24-APR-07 MSB
5 15 16 17
19-MAR-09 JJB
6 03 04 05 06 09 10 11 14
19-MAR-09 JJB
6 15 16 17
06-APR-09 JJB
7 05 06 11
Rev. Line Date Sign

You might also like