Professional Documents
Culture Documents
5 years experience in
Infrastructure projects such as Bridges, Metros,
Senior Design Engineer (Infrastructure)
Ports, etc.
Prebid Preliminary Design and Quantity Estimation for Liberty Flyover, Nagpur, M/S J NCC Limited.
(Software used: Staad Pro)
Prebid Preliminary Design and Quantity Estimation for Mumbai metro stations, M/S J Kumar
Infraprojects Ltd. (Software used: Staad Pro)
Analysis of Offshore Container Terminal at Mumbai Port at MbPT, for additional crane loads,
Gammon India Limited & Indira Container Treminal Pvt. Ltd. (Software used: Staad Pro)
Superstructure design for balanced Cantilever Bridge over Govind Sagar at Bagchhal, Himachal
Pradesh, PWD Himachal Pradesh. (Software used: Sofistik)
Analysis Design of Pile Foundation For Bridge over Govind Sagar river at Bagchhal, PWD Himachal
Pradesh.
Superstructure design for balanced Cantilever Bridge over Bramhaputra River (Tender work),
Guwahati, PWD Guwahati. (Software used: Sofistik)
Analysis & design of segmental Box girder spans of 25m to 35m for Pawana Bridge, PCMC.
Site Inspection and Repair and Rehabilitation Measures for Offshore Container Terminal at
Mumbai Port at MbPT, Gammon India Limited & Indira Container Treminal Pvt. Ltd.
Design of Hopper Supporting steel Structure For Rayalseema Thermal power project (1 X
600MW), Andhra Pradesh Power Generation Corporation Limited, Hydrabad. (Software used:
Staad Pro)
Analysis & Design of External Platform at all Elevations For Rayalseema Thermal power project
(1 X 600MW), Andhra Pradesh Powe Generation Corporation Limited, Hydrabad. (Software used:
Staad Pro)
Analysis and Design of Precast Staircase, For Nathani Heights, Mumbai. (Software used: Staad
Pro)
Analysis of Internal Grillage Structure for Rajasthan Atomic Power Project, NPCIL. (Software used:
Sofistik)
07-2013 - Intern,
08-2013 Vinit Consultants, Navi Mumbai
Role: Modeling, Analysis & Design of RCC buildings (E Tabs)
Qualification
09-2012 - M. Tech Structural Engineering, (GATE 2012, AIR 1056, 97.07 Percentile)
06-2014 VJTI, Matunga, 8.3 CGPA
Extension of Direct Strength Method for Slender Cold Formed Steel Column Sections with
Perforations ( M Tech Dissertation)
Research was focused on studying applicability of available DSM (Direct Strength Method)
equations for the cold formed steel compression members with perforations by comparing it with
finite element results carried out by ABAQUS. Need for more general design method which
considers the influence of holes across all cold-formed steel was identified and formulas were
proposed for the slender cold formed steel compression members with perforations.
“Extension of Direct Strength Method for Slender Cold Formed Steel Column Sections with Perforations”
International Journal of Engineering Research and Applications, Volume 5 - Issue 4 (Part - III) April 2015
( http://www.ijera.com/papers/Vol5_issue4/Part%20%204/K504044954.pdf )
Visiting faculty for the subject “Bridge Engineering” at Sardar Patel College of Engineering and Technology,
Andheri for M Tech Structures, Sem-II, 2016
Conducted Session on MATLAB, in the workshop on “Recent Trends in Finite Element Method” at VJTI, Mumbai.
Date :
Pravin R. Awalkonde