Professional Documents
Culture Documents
Note) The table shows the valve without sub-plate. With sub-plate: Add 0.24 kg
Specifications
Max. operating pressure 1.0 MPa
Pilot air pressure 0.1 to 1.0 MPa
Ambient temperature and operating fluid temperature
Lubrication Not required (2)
Impact/Vibration resistance (m/s2) (3) 150/50
Enclosure Dustproof (Enclosure class 0) (4)
Note 1) Use dry air to prevent condensation when operating at low temperature.
Note 2) Use turbine oil Class 1 (ISO VG32), if lubricated.
Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and
right angle directions of main valve, each one time when pilot
signal is ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis
and right angle direction of main valve, each one time when pilot
signal ON and OFF. (Value in the initial stage)
Note 4) As per JIS C0920
• Manifold possible.
JIS Symbol • When requiring bottom piping, please specify it.
2 position single 01
Sub-plate Assembly Part No.: VS4020-S- 0203
∗ Mounting bolt and gasket are not included.
VSA 4 1 2 0 02
Air operated valve Thread type
3 position closed center Nil Rc
4/5 port valve N∗ NPT
Function T∗ NPTF
1 2 position single F∗ PF
Body size
2 2 position double 14
∗ Option
2 standard
3 3 position closed center
Pilot
3 position exhaust center 4 3 position exhaust center
Nil Body side
Piping 1∗ Base side (Without sub-plate)
0 Sub-plate side ported Port size ∗ Option
1∗ Sub-plate bottom ported 00 Without sub-plate
4 Without sub-plate (For manifold) 01 Rc 1 8 Option
∗ Option 02 Rc 1 4 Nil None
03 Rc 3 8 PA Non-locking manual override
∗ Bottom ported: Rc 1/8
Caution and 1/4 only
Be sure to read this before handling. Refer to front matters 58 and 59 for
Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve
Precautions.
1784
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
P1728-P1824-E0905.qxd 08.9.5 4:35 PM Page 1785
Construction
2 position single: VSA4120 2 position double: VSA4220 3 position closed center: VSA4320
Dimensions
2 position single: VSA4120 2 position double: VSA4220 3 position closed center: VSA4320
3 position exhaust center: VSA4420
2 x Rc 1 8
Rc 1 8
2 x Rc 1 8
SYA
SYJA
3 x ø7 3 x ø7
33 xx ø7
ø7
VZA
Mounting hole Mounting hole
Mounting hole
VFA
VFRA
VA
55 x Rc 1 8 , 1/4,
Rc 1/8, 1 4, 33/8
8 5 x Rc 1 8 , 1/4,
Rc 1/8, 1 4, 33/8
55xxRc 1 8 ,1/4,
Rc1/8, 1 4,3/8
38 8
1785
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
P1728-P1824-E0905.qxd 08.9.5 4:35 PM Page 1786
Note) The table shows the value without sub-plate. With sub-plate: Add 0.41 kg
Specifications
Max. operating pressure 1.0 MPa
Pilot air pressure 0.1 to 1.0 MPa
Ambient temperature and operating fluid temperature
Lubrication Not required (2)
Impact/Vibration resistance (m/s2) (3) 150/50
Enclosure Dustproof (Enclosure class 0) (4)
Note 1) Use dry air to prevent condensation when operating at low temperature.
Note 2) Use turbine oil Class 1 (ISO VG32) if lubricated.
Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is
ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and
right angle direction of main valve, each one time when pilot signal
ON and OFF. (Value in the initial stage)
Note 4) As per JIS C0920
JIS Symbol • Manifold possible.
2 position single • When requiring bottom piping, please specify it.
02
Sub-plate Assembly Part No.: VS4030-S- 03
04
∗ Mounting bolt and gasket are not included.
Mounting Bolts, Gasket Part No.: BG-VS4030
2 position double How to Order
VSA 4 1 3 0 02
Thread type
Air operated valve
3 position closed center Nil Rc
4/5 port valve N∗ NPT
Function T∗ NPTF
1 2 position single F∗ PF
Body size
2 2 position double 38 ∗ Option
3 standard
3 3 position closed center
Pilot
3 position exhaust center 4 3 position exhaust center
Nil Body side
Piping 1∗ Base side (Without sub-plate)
0 Sub-plate side ported Port size ∗ Option
1∗ Sub-plate bottom ported 00 Without sub-plate Option
4 Without sub-plate (For manifold) 02 Rc 1 4 Nil None
∗ Option 03 Rc 3 8 PA Non-locking manual override
04 Rc 1 2
∗ Bottom ported: Rc 1/4
Caution and 3/8 only
Construction
2 position single: VSA4130 2 position double: VSA4230 3 position closed center: VSA4330
Dimensions
2 position single: VSA4130 2 position double: VSA4230 3 position closed center: VSA4330
3 position exhaust center: VSA4430
4 x ø7 Mounting hole
4 x ø7 Mounting hole 4 x ø7 Mounting hole
2 x Rc 1 8
SYA
2 x Rc 1 8
SYJA
VZA
VFA
VFRA
VA
5 x Rc 1 4, 3 8 ,1 2 5 x Rc 1 4, 3 8 ,1 2 5 x Rc 1 4, 3 8 ,1 2
1787
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
P1728-P1824-E0905.qxd 08.9.5 4:35 PM Page 1788
Note ) The table shows the value without sub-plate. With sub-plate: Add 0.6 kg for Rc 1/2, 1.4 kg for Rc 3/4.
Specifications
Max. operating pressure 1.0 MPa
Pilot air pressure 0.1 to 1.0 MPa
Ambient temperature and operating fluid temperature
Lubrication Not required (2)
Impact/Vibration resistance (m/s2) (3) 150/50
Enclosure Dustproof (Enclosure class 0) (4)
Note 1) Use dry air to prevent condensation when operating at low temperature.
Note 2) Use turbine oil Class 1 (ISO VG32), if lubricated.
Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is
ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and
right angle direction of main valve, each one time when pilot signal
ON and OFF. (Value in the initial stage)
Note 4) As per JIS C0920
• Manifold possible.
JIS Symbol • When requiring bottom piping, please specify it.
2 position single
Sub-plate Assembly Part No.: VS4040-S- 04
06
∗ Mounting bolt and gasket are not included.
Mounting Bolts, Gasket Part No.: BG-VS4040
VSA 4 1 4 0 04
Thread type
Air operated valve
Nil Rc
3 position closed center 4/5 port valve N∗ NPT
Function T∗ NPTF
2 position single F∗ PF
1 Body size ∗ Option
2 2 position double 12
4 standard
3 3 position closed center Pilot
3 position exhaust center 4 3 position exhaust center Nil Body side
1∗ Base side (Without sub-plate)
Piping ∗ Option
1788
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
P1728-P1824-E0905.qxd 08.9.5 4:35 PM Page 1789
Construction
2 position single: VSA4140 2 position double: VSA4240 3 position closed center: VSA4340
Dimensions
2 position single: VSA4140 2 position double: VSA4240 3 position closed center: VSA4340
3 position exhaust center: VSA4440
5 x Rc 3 8, 1 2 , (3 4) 5 x Rc 3 8, 1 2 , (3 4) 5 x Rc 3 8, 1 2 , (3 4)
1789
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
P1728-P1824-E0905.qxd 08.9.5 4:35 PM Page 1790
Specifications
Type E Valve manifold with the same body size ∗
Manifold type Type N Valve manifold with the same body size
Type V Valve manifold with the different body sizes
Stations 2 to 10 stations (Standard)
EXH port Common EXH, Individual EXH
Piping Side piping, Bottom piping
∗ Type E is available only for common EXH and side piping.
Manifold: Type N
VVSA420N Dimensions (mm)
L
n L2 L1
n x Rc 1 8
Pilot hole 2 stations 226 186
3 stations 288 248
4 stations 350 310
4n x Rc 1 4, 3 8
5 stations 412 372
4xø9 mounting n stations 62n + 102 62n + 62
hole 6 x Rc 3 8 Applicable VSA4120, VSA4220
valve VSA4320, VSA4420
Manifold weight general equation
M = 0.66n + 0.75 (kg) n: Station
1790
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
P1728-P1824-E0905.qxd 08.9.5 4:35 PM Page 1791
Manifold
Air operated valve
Series VSA
4 port valve Thread type
Body size
EXH port
Nil Rc SYA
Symbol Size Piping N∗ NPT
2 14 Symbol Type T∗ NPTF
Symbol P A, B EA, EB
3 38
0 Side Side Side
1 Common F∗ PF
SYJA
4 12 2 Individual ∗ Option
1 Side Bottom Side
9 Others VZA
Manifold type
Symbol Type
Stations E Type E
VFA
Symbol No. of stations N Type N ∗ A and B port sizes are same as port sizes in standard body size. When
02 2 stations V Type V requiring different port size, contact SMC. VFRA
10 10 stations VA
Manifold Optional Parts
Option Body size Assembly part no. Attached parts
14 XT015-4A
Blank plate 38 XT016-5A Gasket, Bolt
12 XT038N-4A
14 AXT394A
Interface speed 38 Gasket, Bolt
AXT393A
control 12 AXT396A
Indicate valve and option number with the manifold base number.
<Example>
(Manifold base) VVSA430-05N1 ····· 1
(2 position single) VSA4134-00 ·········· 3
(2 position double) VSA4234-00 ·········· 1
(Blank plate) XTO16-5A ·············· 1
1791
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com