Professional Documents
Culture Documents
Experience In Motion
Pump Supplier to the World
Flowserve is the driving force in the global industrial Product Brands of Distinction
pump marketplace. No other pump company in the
world has the depth or breadth of expertise in the ACEC™ Centrifugal Pumps
successful application of pre-engineered, engineered, Aldrich™ Pumps
and special purpose pumps and systems.
Byron Jackson ® Pumps
Pacific ® Pumps
Broad Product Lines
Flowserve offers a wide range of complementary pump Pleuger ® Pumps
types, from pre-engineered process pumps to highly
Scienco™ Pumps
engineered and special purpose pumps and systems.
Pumps are built to recognized global standards and Sier-Bath ® Rotary Pumps
customer specifications.
Pump designs include: TKL™ Pumps
• Single-stage process
United Centrifugal ® Pumps
• Between bearings single-stage
• Between bearings multistage Western Land Roller™ Irrigation Pumps
• Vertical
• Submersible motor Wilson-Snyder ® Pumps
• Positive displacement
• Nuclear Worthington ® Pumps
• Specialty
Worthington Simpson™ Pumps
2
flowserve.com
LPN
Between Bearings,
Axially Split,
Single-Stage,
Double Suction Pumps
ISO 13709/API 610 (BB1)
The Flowserve LPN is an axially split, single-stage Suction and Discharge Nozzles are integrally cast
pump designed to ISO 13709/API 610 (BB1), latest in the lower half casing to permit pump disassembly
without disturbing the piping. Nozzles are designed
edition. With a double-suction impeller, the LPN
to handle external forces and moments equal to or in
is a natural solution for many low NPSH applications,
excess of ISO 13709/API 610 specifications.
such as those found in water and hydrocarbon
Confined Gasket Design allows metal-to-metal
transfer service.
contact for proper gasket compression and eliminates
corrosion of bolts and nuts.
Operating Parameters
Raised Face Flanges meet ASME B16.5 standards
• Flows to 15 000 m3/h (65 000 US gpm)
and are available in Class 150 (PN 20) and 300 (PN 40).
• Heads to 250 m (800 ft)
• Pressures to 25 bar (365 psi); 50 bar (725 psi) Renewable Casing and Impeller Wear Rings are
on the high pressure LPN-H model standard, permitting continued high operating
• Temperatures to 204°C (400°F) efficiency. Clearances are per ISO/API requirements.
Double-suction Impeller provides hydraulic axial
Features and Benefits balance and allows minimal NPSHR. The complete
Double Volute, Axially Split Casing Design minimizes rotor assembly is dynamically balanced to assure
hydraulic radial forces in any condition down to the minimum vibration-free operation as per ISO/API requirements.
flow, thus reducing shaft deflection and increasing the life of ISO 21049/API 682 Seal Chambers operate at
bearings, seals and wear rings. suction pressure and allow for installation of cartridge
Near Centerline Mounting provides superior pump alignment style single, dual unpressurized and dual pressurized
and performance at elevated temperatures. mechanical seals to meet safety and environmental
4
requirements.
flowserve.com
Flow Rate - 60 Hz
m3/h 400 600 800 1000 2000 4000 6000 10 000 20 000
600 200
400
100 400
80
TDH - 60 Hz
TDH - 50 Hz
100
200 60 80
200 60
40
100 40
80 100
20 80
60
20
60
40
10 40
m3/h 200 400 600 800 1000 2000 4000 6000 10 000 20 000
Flow Rate - 50 Hz
flowserve.com
Global Service
and Technical
Support
Energy
Latin America
Flowserve Corporation
Martín Rodriguez 4460
B1644CGN-Victoria-San Fernando
Buenos Aires, Argentina
Telephone: +54 11 4006 8700
Telefax: +54 11 4714 1610
Asia Pacific
Flowserve Pte. Ltd.
10 Tuas Loop
Singapore 637345
Telephone: +65 6771 0600
Telefax: +65 6862 2329
flowserve.com