Professional Documents
Culture Documents
When the load is applied to the truss, the foce in each of members of a plan
truss will have a different reading of force.
DISCUSSION :
1) State the relationship between the applied load and the force in the
members.
Figure 5.3
Figure 5.4
Because members of the DE is in equilibrium, the point D itself is also in
equilibrium. Therefore, if the split between the point D to point E, as shown
in Figure 5.4 (b) force at every point has a magnitude P in the direction
opposite to the direction of external forces earlier. Thus, the force in the
member acting against the direction of DE external force is applied,
Figure 5.5
and must have the same magnitude as the external force, see Figure 5.4 (c).
For members who have this compression force, the internal force to the
point of connection.
At the same time, if we look at the members of the CD, an external force
which suffered a tensile force, as shown in Figure 5.5 (a), while the internal
forces are shown in Figure 5.5 (b). Thus, for members who experience a
tensile force, the internal forces from the point of connection.
2) State the possible factors that might have influenced your result and
means of overcoming it.