Professional Documents
Culture Documents
Hazards27
RDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
DS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS H
AZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZA
ARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARD
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZ
DS HAZARDS
In associationHAZARDS
with HAZARDS HAZARDS
the Mary Kay HAZARDS
O’Connor ProcessHAZARDS HAZARDS H
Safety Center
ARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARD
AZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZA
10–HAZARDS
HAZARDS 12 MayHAZARDS
2017, Birmingham,
HAZARDS HAZARDS UKHAZARDS HAZARDS HAZ
AZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZA
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
Conference programme
DS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS H
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
and registration
DS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS H
ARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARD
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZ
DS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS H
ARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARD
HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZ
AZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZA
ARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARD
RDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
DS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS H
AZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZA
ARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARD
ZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZAR
HAZARDS
ConferenceHAZARDS
partner HAZARDS HAZARDS HAZARDS HAZARDS HAZARDS HAZ
IChe
m
n
Ce
Why
27 ?
attend Hazards
Network with
international
process Learn from others’
safety experiences
practitioners
Review best
practice
Discover products
and latest
and services to
developments
help reduce the
in process
risk of hazardous
safety
events
#hazards27
www.icheme.org/hazards27
Hazards 27
10–12 May 2017 Birmingham, UK
3
27 Event features
Hazards
■■ approximately 100 oral and poster presentations from leading industry practitioners, researchers
and regulators
■■ invited keynote speakers providing their own strategic views on the process safety challenge
■■ pre-conference workshops
■■ networking opportunities
Anyone who is active in process safety and risk management for chemical process facilities or other facilities dealing
with hazardous materials including:
■■ process safety practitioners in industry
■■ senior industry leaders accountable for process safety without day-to-day responsibility
■■ academic researchers
The conference is designed to appeal to practitioners working at all levels and in all industry sectors.
27 Why attend?
Hazards
■■ discover products and safety to help reduce the risk of hazardous events
27 Exhibition
Hazards
A trade exhibition will run alongside the conference, showcasing products and services to help improve your
process safety performance.
Visit www.icheme.org/hazards27-sponsorship to download a copy of the sponsorship and exhibition brochure,
which outlines the packages available and the benefits of getting your company involved. Alternatively contact us
on +44 (0)1788 534455 or hazards27@icheme.org to discuss your requirements.
#hazards27 www.icheme.org/hazards27
27 Networking opportunities
Hazards
Sponsored by
Evening event
Thursday 11 May 2017, 19:30–23:00*
5
27 Keynote speakers
Hazards
#hazards27 www.icheme.org/hazards27
Sally Martin, Vice President, HSSE downstream, Shell
"Process Safety Fundamentals – Making Process Safety ‘Real’ in the Field"
Sally studied electrical engineering at University College in Cork, Ireland. She has worked for
Shell for 30 years, joining as an Instrument Engineer before training as a Process Control engineer,
and working in a number of engineering and project management roles, including two years
as Contracting and Procurement Manager of Stanlow refinery. In 2001, she became Shell’s
Distribution Manager for the UK and Ireland, before becoming General Manager of Petit-Couronne
Refinery near Rouen, France in 2005. She returned to London in 2007 to join Shell’s downstream
strategy and portfolio team and became Vice President of the commercial arm of Shell Global
Solutions (Shell’s worldwide technical consultancy) in 2010. She moved into her current role
as Vice President of Health, Safety, Security and Environment for Shell’s global downstream
operations in 2013.
3
7
27 Conference programme 27 Technical committee
Hazards Hazards
10:00–13:00 Pre-conference workshops (prior registration required) - see page 14 ■■ Andy Crerand – Shell ■■ Rob Magraw – BakerRisk
14:00–17:00 Pre-conference workshops (prior registration required) - see page 14 ■■ Laurence Cusco – Health and Safety Laboratory ■■ Arvinder Saimbi – Samtech Process Safety
(committee chair)
17:30–18:10 Opening session ■■ Christopher Tighe – Imperial College
■■ Kevin Dixon-Jackson ■■ Peter Webb – Lloydell Bassell
Trevor Kletz Hazards lecture
18:10–18:50 Mark Gallagher, Performance Insights ■■ Rhian Drath Morgan – BP ■■ Craig Williams – Syngenta
27 Poster presentations
Hazards
Thursday 11 May 2017
07:15–08:30 Registration
Keynote presentation
08:30–09:10 The Importance and Practical Application of Good Process Safety Management In a Poster presentations will be available to view throughout the conference. Presentation titles will be published on the
Fast Moving Consumer Goods Company conference website as they are confirmed.
Malcolm Sarstedt, Unilever
Keynote presentation
09:10–09:50 Jasper Clark, Marsh Energy
10:20–10:50 How Do We Demonstrate That a Consequence Model is Practical Implementation of System Safety Approaches Process Safety Not Guaranteed: the Need for New Learning Domino Effects Between Pipelines in Pipeline Corridors
Fit-For-Purpose? and STAMP in the Oil and Gas Sector Approaches GMH Laheij & MB Spoelstra, RIVM, Netherlands; B Chiaradia,
Simon Coldrick, Health and Safety Executive, UK Conor J Crowley, Atkins, UK Steve Lewis, Risktec Solutions, UK Petrochemical Pipeline Services, Netherlands; F Driessen,
Vereniging van Leidingeigenaren in Nederland, Netherlands;
MT Dröge, NV Nederlandse Gasunie, Netherlands; S Rozendal,
Nederlandse Aardolie Maatschappij, Netherlands; CJ Theune,
Ministry of Infrastructure and the Environment, Netherlands
10:55–11:25 Relevance of the Current Modelling Methods for the Lessons Learnt From the Introduction of Human Bridging the Divide – OHS and Process Safety Risk Assessment of Natural Gas Transmission Pipelines at Major
Prediction of LNG Vapour Dispersion and Development to Performance Concepts & Tools on Oil & Gas Platforms Trish Kerin, IChemE Safety Centre, Australia River Crossings
Be Carried On Johnny Mitchell, The Keil Centre, UK MR Acton, K Dimitriadis & K Warhurst, DNV GL, UK;
Pierre Quillatre, ENGIE Lab CRIGEN, France S Potts, National Grid Gas, UK
11:30–12:00 Gravity-Driven Flammable Vapour Clouds The CIEHF White Paper on Human Factors in Barrier Process Safety Behaviours: What Are They and How Do They Using Quantified Risk Assessment (QRA) in Feasibility Design
Graham Atkinson, HSE Science Division, UK Management: Recommendations for Good Practice Link to Occupational (Personal) Safety Behaviours? Adrian Jones, Steven Joyce, Hui Yan & Eva Fernandes Vilas,
Ronald McLeod, Consultant; Ian Randle, Hu-Tech Human Roderick Prior, SHExcellence, South Africa Costain, UK; Steve Potts, National Grid, UK
Factors, UK
12:05–12:35 Jack Rabbit II 2015 Trials: Preliminary Comparison of the Human Factors Issues in Control of Work Systems Making Process Safety Personal Storage Tank Explosion Frequencies on FPSOs
Experimental Results Against Drift and Phast Dispersion Jamie Henderson, Neil Hunter & David Embrey, Human David Royle, Basell Polyolefins UK (LyondellBasell), UK & John Spouge, DNV GL, UK
Model Predictions Reliability Associates, UK Peter Webb, LyondellBasell, UK
Bryan McKenna, Maria Mallafrè Garcia, Simon Gant, Alison
McGillivray, Rachel Batt & Mike Wardman, Harvey Tucker,
Health and Safety Executive, UK; Graham Tickle, GT Science
& Software, UK; Henk Witlox, DNV GL Software, UK
13:30–14:00 Environmental Risk Gap Analysis: Major Accident to the Fire and Explosion Risk in Biodiesel Production Plants: Integrating ALARP and Inherent Safety into Fast-Track Design Measuring Human Performance: the Next Big Challenge
Environment Case Studies a Case Study David Stephens, Oxford Hazard Management, UK; Ian Travers, Leidos Innovations, UK
Mike Nicholas, Environment Agency, UK Luca Marmo & Enrico Danzi, Politecnico di Torino, Italy; Simon Round, Amec Foster Wheeler Energy, UK
Leonardo Tognotti, Università di Pisa, Italy;
Valerio Cozzani, Ernesto Salzano & Valeria Casson
˘ ˘ Università di Bologna, Italy; Daniela Riccio,
Moreno,
Alchim sas, Italy
14:05–14:35 Inspection of Secondary and Tertiary Containment Effectiveness of Oil Mist Detectors in Relation to Oil Interlocking Isolation Valves – Less is More Organisational Change Management – Making a Change,
Systems Mist Droplet Size and Concentration Dr Andy Brazier, AB Risk, UK Managing Hazards, Protecting People
Chris Dickinson, Environment Agency, UK Andrew Thorpe & Sumeet Pabby, Health and Safety Catherine Tait & Sophie Whitehead, Atkins, UK
Executive, UK
14:40–15:10 Practical Application of the Chemical and Downstream Oil Is There a Bomb in Your Basement? Boiler Explosion Studying the Relationship Between Inherently Safer Design Worker Fatigue Risk Management: Benefits and Challenges?
Industry Forum (CDOIF) Guideline “Environmental Risk Hazards That Are Often Forgotten in Risk Assessments and Equipment Reliability Colleen Butler & Julie Bell, Health and Safety Executive, UK
Tolerability for COMAH Establishments” Gaynor Woodford-Phillips & Miriam Lander, ABB Nilesh Ade, Guanlan Liu & M. Sam Mannan, Texas A&M
Ron Graham, Sellafield Ltd, UK Consulting, UK University, USA
15:45–16:15 PSM is Not Decreasing the Number of Loss Events. Seven Years on from Deep Water Horizon – How the The “Duktus” for the Assessment of Explosion Hazards – a A Hierarchical Guide to Evaluating Your Asset Integrity
What Does a CEO Need to Know to Stop Engineers and Global Industry Has Applied the Learning from the Methodical Toolbox for Application Management System Against International Practice
Operators Blowing Up His Plant? Response Katharina Maiwald, Bastian Liske & Uli Barth, University of Mark Wright & Jerry Mullins, ROSEN, UK
Derek Lawler, Consultant, UK Dr Steven A Flynn, IPIECA, UK Wuppertal, Germany
16:20–16:50 Addressing the Dissonance between Corporate and Our Disabling Road Accident – Lessons Relevant to the A Closer Look at Some Aspects of the Methodology of Safety, Human Factors, Culture and Lessons Learnt from
Individual Process Safety Drivers Process Industries Hazardous Area Classification Using CFD Decommissioning
Angus Keddie, Process Safety Matters, UK Chris Arthey, Consultant, UK Lorenzo Mauri & Kees van Wingerden, Gexcon AS, Norway Dr Azzam Younes, ABB, UK
16:50–17:20 The Silo Factor – Why Tackling Silos Can Improve Process An Analysis of Common Causes of Major Losses in the Area Zoning: Its Role in a Risk-Based Process Safety Offshore Critical Barrier Identification: Management of Their
Safety Performance Onshore Oil, Gas & Petrochemical Industries Programme Continuing Suitability and Their Verification
Conrad Ellison, ABB Consulting, UK Ron Jarvis, Swiss Re, UK; Andy Goddard, Talbot Stephen Garner, Brenton Cox, Justin Bishop & Mark Fecke, Richard Potter & Justin Holroyd, Health and Safety Executive, UK
Underwriting, UK Exponent, USA
3
#hazards27 www.icheme.org/hazards27 11
Friday 12 May 2017
08:30–09:10 Process Safety Fundamentals – Making Process Safety ‘Real’ in the Field Keynote presentation
Sally Martin, Shell
Keynote presentation
09:10–09:50 Managing Weak Signals – Driving Continuous Improvement in Process Safety in a
Complex Organisation
Chris Beale, BASF
Characterisation of a Vehicle Fire on a 7 Tonne LPG Road Novel Application of the Bow Tie Technique for the Safety System Fire Analysis – How Can Fire Challenge the Existing Challenges in Incorporating Process Safety
10:20–10:50 Tanker Analysis of the NFPA 59A Standard Safe Operation of a Facility? And How Can It Be Established Management in Developing Countries and Ways to Overcome
Lorraine Jenney, DNV GL, UK Maria Mallafrè Garcia, Mike Wardman & Jill Wilday, Health Whether a Fire Can Cause a Facility/ Process to Enter an Yogesh Koirala, Andres Hernandez & M. Sam Mannan, Texas
and Safety Executive, UK Unsafe State? A&M University, USA
James Daley, RPS Risk Management, UK
The Importance of Considering Realistic Blast Waveforms It’s Not What We Don’t Know That is the Problem; It’s High Risk Process Loops: A Case Study Using Fire Hazard Development of the Singapore QRA Guidelines
10:55–11:25 and Corresponding Methods of Assessing Structural What We Do Know That Isn’t So Analysis To Effectively Manage Fire Escalation Risk Mike Wardman, Jill Wilday & Laurence Cusco, Health and Safety
Damage When Conducting Quantitative Risk Assessments Graeme Dick, RGD Operations, Norway David Black & Karen Vilas, Baker Engineering and Risk Executive, UK
Christopher G. Stirling & Nicolas K. Misselbrook, Thornton Consultants, USA; Robert Magraw, BakerRisk Europe, UK
Tomesetti, UK; Lisa Nikodym, John Mould & James Wesevich,
Thornton Tomasetti, USA
Numerical Predictions of the Rollover Phenomenon Using Representing Human Factors in Bowties as Per the New Domino Effect Triggered by Fire: Performance Assessment Safety Case Regulations for Major Hazard Facilities in Cuba
11:30–12:00 Computational Fluid Dynamics CCPS/EI Book of Safety Barriers in Harsh Environmental Conditions Fidel Ilizástigui Pérez, Office for Environment and Nuclear Safety
Antoine Hubert & Siaka Dembele, Kingston University, UK; Mark Manton, ABS Group, UK; Martin Johnson, BP, UK; Gabriele Landucci, University of Pisa, Italy; Regulation (ORASEN), Cuba
Petr Denissenko & Jennifer Wen, Warwick University, UK Robin Pitblado, DNV GL, USA; Charles Cowley, CCPS, Valerio Cozzani & Marta Bucelli, University of Bologna,
UK; Tim McGrath, Genentech, USA; Ron McLeod, Italy; Nicola Paltrinieri, Norwegian University of Science and
Consultant, UK; Rob Miles, Hu-Tech RMS, UK Technology NTNU, Norway
Consequences of the Failure of Mobile Gas Vessels In a Globalised World Is Process Safety Becoming Analysis of Combustible Dust Flash Fires on Personal Process Safety Management – Creating a Sustainable Global
12:05–12:35 Harmonised? Protective Equipment Fabrics Approach
D Krentel, R Tschirschwitz, M Kluge, E Askar, K Habib, H
Kohlhoff, G Mair, P Neumann, M Rudolph, A Schoppa, S U Pat Swords, PM Group, Ireland Sean C. O’Hern, Michael C. Stern, David Anderson, Alfonso Rachelle Doyle, Woodside Energy, Australia
Storm & M Szczepaniak, Bundesanstalt für Materialforschung Ibarreta & Timothy J. Myers, Exponent, USA
und–pruefung (BAM), Germany
Optional workshops will be held at the conference venue on Wednesday 10 May 2017 before the official start of the
conference. Places are limited and available on a first-come-first-served’ basis with prior registration required via your
conference registration form.
Managing crises and major incidents will affect an entire organisation. All
normal operations cease, priorities change and employees and teams are put in
situations they may never have experienced before. In the hazardous chemical
and process industries, detailed emergency planning is essential.
IChe
m Share your thoughts on the future direction of process safety. Led by the
E
IChemE Safety Centre in association with the Mary Kay O’Connor Process
Safet
Safety Centre, this interactive workshop will continue the discussion started
ISCat Hazards 26, where we collected feedback on the key challenges to process
re
n
Ce
these challenges. Come along and be part of the conversation.
#hazards27 www.icheme.org/hazards27
14:00–17:00 Human Factors in Health and Safety
This workshop, led by author of IChemE's Using Risk Graphs for SIL
Determination Clive De Salis, will help you better understand how to design a
risk graph for your process risks.
You'll learn how to mathematically calibrate a risk graph based on your designs
and how to use existing corporate systems for the design and calibration to
make usage as easy as possible. Participants will also be able to check all risk
graph data matches LOPA, making the more detailed LOPA check easier.
Attendees should ensure they bring calculators to the workshop.
3
15
27 General information
Hazards
3
27
Hazards
Join the
conversation
Follow @Hazards27 on Twitter
Contact us
Join the Hazards 27 LinkedIn group
General enquiries
+44 (0)1788 534431
hazards27@icheme.org
Registration
+44 (0)1788 534430
ar@icheme.org
IChemE is a registered charity in England and Wales, and a charity registered in Scotland (SC 039661)
17
IChemE offices in Kuala Lumpur, London, Melbourne, Rugby, Singapore and Wellington
www.icheme.org
Global headquarters
UK – Rugby
Tel: +44 (0)1788 578214
Email: info@icheme.org
Australia
Tel: +61 (0)3 9642 4494
Email: austmembers@icheme.org
Malaysia
Tel: +603 2283 1381
Email: malaysianmembers@icheme.org
New Zealand
Tel: +64 (4)473 4398
Email: nzmembers@icheme.org
Singapore
Tel: +65 6471 5043
Email: singaporemembers@icheme.org
UK – London
Tel: +44 (0)20 7927 8200
Email: info@icheme.org
www.icheme.org
IChemE is a registered charity in England and Wales, and a charity registered in Scotland (SC 039661)