4 Interstiffener collapse The minimum yield strength or 0,2% proof strength at calculation temperature: Rp0,2T 345 [Mpa]
The nominal elastic limits for shell:
Ferritic material 𝜎 =𝑅 , / Austenitic material 𝑅 , / 𝜎 = 1,25 Fer σe 345 [Mpa] The nominal thickness: en 10 [mm] The corrosion allowance: c 2 [mm] The absolute value of the possible negative tolerance on the nominal thickness (EN 10029): quality D de1 0,7 [mm]
Limit values of weld joint defects (EN ISO 5817): quality C
The radius of the centroid of the stiffener cross- section: Rs 500 [mm] The elastic modulus: E 210000 [MPa] The unsupported length of the shell: L 1000 [mm]
The total width of stiffener i in contact with the shell: wi 10 [mm]
The cross-sectional area of stiffener: As 890 [mm2] The modified area of a stiffener: 𝑅 𝐴 = 𝐴 𝑅 Am 776,4 [mm2] Parameter: , 3 1−𝜐 𝛿= 𝑅∗𝑒 δ 0,024 [] Parameter: cosh 𝛿𝐿 − cos 𝛿𝐿 𝑁= sinh 𝛿𝐿 + sin 𝛿𝐿 N 1,000 [] Parameter: 𝛿𝐿 𝛿𝐿 𝛿𝐿 𝛿𝐿 2 sinh 2 cos 2 + cosh 2 sin 2 𝐺= sinh 𝛿𝐿 + sin 𝛿𝐿 G 0,000 [] Parameter: 2𝑒 𝑁 𝐵= 𝛿 𝐴 +𝑤 ∗𝑒 B 0,537 [] Coefficient: 𝜈 𝐴 1−2 𝛾= 𝐴 +𝑤 ∗𝑒 1+𝐵 γ 0,517 []
The pressure at which mean circumferential stress in a
cylindrical, reaches yield point: 𝜎 ∗𝑒 𝑃 = 𝑅 1−𝛾∗𝐺 Py 4,0 [MPa] L/2R 1,1 ea/2R 0,006 The number of circumferential waves for an unstiffened part of a cylinder: ncyl 4 [] Parameter: 𝜋∗𝑅 𝑍= 𝐿 Z 1,5 [] Poisson's ratio: ν 0,3 []
The mean elastic circumferential strain at collapse: