You are on page 1of 24

1 Artist Basics

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Starting Artist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using Artist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Definition of Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Creating a New Artist Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Opening Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Duplicating Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Closing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Saving Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Plotting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Deleting Artist Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Palette Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Stack CGMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Run Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Exiting Artist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-1


With Epos® 4 Data Management (v. 4.1)
Overview
Artist is Geolog’s application for creating and inserting graphic objects and pictures. These objects and
pictures are then applied to displays of well data, project maps, cross sections, etc.
With Artist you can:
• Draw polylines and shapes that can be filled to create legends, labels and logos.
• Use grid snap or object snap drawing.
• Enter and format text to be used as descriptive information, or as variables to display constants
such as a well name, operator, etc.
• Use a standard set of patterns and markers such as lithology and well symbols.
• Insert and enhance plot files and graphic images that have been created with other Geolog
modules and software packages.
• Create a montage of inserted drawings and drawn objects.
• Build a portfolio of drawings to ensure consistency from project to project.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-2


With Epos® 4 Data Management (v. 4.1)
Starting Artist

Unless otherwise specified, drawings created in Artist are stored in the plots directory and can be inserted
into displays of log data or, alternatively, displays such as cross sections can be opened in Artist for
enhancement by using the graphical tools.
Starting Artist is dependent on the currently open application. Fig. 1 is an example of the Artist
application.

Fig. 1: Artist application window

To start Artist from the Geolog® Launcher Bar

• Click on the Artist button


Or
Select Applications > Artist.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-3


With Epos® 4 Data Management (v. 4.1)
To start Artist from within another Geolog application
Use one of the following methods:
• Select File > New > New Artist
• On the New Tab, click on the Artist New link
• Select File > Open > Open Artist
• On the New Tab, click on the Artist Open link

To start Artist from the Session Manager


• Click on the Accessories tab, then click on Artist.

To start Artist from the Basemap window


• Click on the Plotting button then on the Preview button in the Plotting dialog box.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-4


With Epos® 4 Data Management (v. 4.1)
Using Artist

This section details techniques for formatting the drawing area in Artist, explains how to open and save
drawings in a plots directory, view your work and exit Artist when you are done.
See Also
“Drawing Objects” on page 2-1 and “Editing Objects” on page 3-1 for information on how to
create and change your drawings.

Definition of Images
Throughout the documentation on Artist, the words image, drawn object or drawing, and picture are used
regularly. It is important to note the difference between the three to understand some of the other basic
features of Artist.
An image is made up of individual pixels grouped together. Commonly, an image may be a photo or a
company logo. There are a number of features in Artist which will allow you to edit your image, including
cropping, resizing and flipping the image.
A drawn object or drawing is something you can assemble yourself. It is made up of polylines, rectangles,
circles and other objects. Drawn objects can also be edited, but some editing functions, such as cropping, do
not work on these objects.
A picture refers to a CGM file which may contain several different elements (inserted images, legends,
drawn objects, etc.). It is the overall display created in Artist, and contains various diagrammatic elements.
The word object is used as a general term to describe all three of the above.

Creating a New Artist Drawing


Once Artist has been started, you can create a new artist drawing. An example of the Artist template,
no_name, is shown in Fig. 2.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-5


With Epos® 4 Data Management (v. 4.1)
Title Bar
Menu Bar
Toolbar

New tab

Artist
template

Drawing
area

Status Bar

Fig. 2: New Artist drawing

To create a new drawing


Select one of the following methods:

• Click the New button


• Click the New artist drawing on the New tab window.
• Press Ctrl+O
• Select File > New
The Artist template with the title no_name is displayed in a new tab window.

Formatting the Drawing Area

By default, the drawing area is set as 20x20cm in size with no border and a white background. Fig. 3 is an
example of a formatted drawing area where the size, border and background color have been defined.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-6


With Epos® 4 Data Management (v. 4.1)
Ruler Units

Drawing area defined


as 5x8cm in size with a
colored background
and border.

Mouse Pointer Location

Fig. 3: An example of a formatted drawing area

The following aspects of the Artist drawing area can be formatted:


• "Size and Color" on page 1-7 – The size of the drawing area and the background color and border
line color, style and width.
• See “Show Grids” on page 5-5 – Can be displayed or hidden.

Size and Color


Formatting the size of the drawing area does not change the size of the Artist window. If you set the drawing
area size larger than the window size, use the “Zoom Functions” on page 5-2 or Scroll Bars to move about
the drawing area, or resize the window.

To set the drawing area size, color and border


1. Open the Properties dialog box using one of the following methods:
— Double click in the drawing area

— Click the Properties button


— Select Edit > Properties

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-7


With Epos® 4 Data Management (v. 4.1)
2. If required, enter a minimum size value for the X and Y axes.
3. To change the paper size do one of the following:
— Change the Width and Height values (by default, Paper Size is set to User Defined)

— Click the Paper Size dropdown list button and select from the list of standard paper
sizes

— Click the Paper Size dropdown list button and select Percentage.
The Select Percentage dialog box is displayed.

 Set the Width and/or Height percentages.


 You also have the option to lock the aspect ratio.
 Click OK to close the Select Percentage dialog box.
4. To scale content to fit the new page size, toggle on Scale Content.
5. Click in the Border and Background fields to display the appearance attribute; set these to
change the appearance of the border and background of the drawing area. See “Appearance
Window” on page 5-7 for more information.

Opening Pictures
Unless otherwise specified, Artist pictures are stored in the ./plots directory.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-8


With Epos® 4 Data Management (v. 4.1)
To open an existing picture
1. Within the Files window (select Windows > Files), locate and double-click on the required file
—the file will open and display at screen resolution

Or

a. Click the Open button , or press Ctrl+O or select Artist > Open to display a “File Select
Dialog Box” on page 1-27.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-9


With Epos® 4 Data Management (v. 4.1)
By default, all files in the /plots directory of the current project e.g. stars are displayed.
b. Optionally, filter for a specific file type using the Files of type field and/or select another
directory.
c. Select the file to be opened.
d. Click Open—image files will open at the current screen resolution. CGM files will open at
the resolution at which they were saved.
The image resolution or size can be changed, see “Editing an Object” on page 3-7 for more
information.

Duplicating Pictures
A copy of an open file can be created within the Artist application.
An exact copy of the picture is created with the name <original name>_1 (e.g. if logo.cgm is duplicated,
the copy would be named logo_1) and displayed in a new tabbed window. This name can be used to save
the file, or a different name can be specified by selecting File > Save As.

To duplicate a picture
1. Within Artist, open or select the file to be duplicated.

2. Click the Duplicate button or select File > Duplicate.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-10


With Epos® 4 Data Management (v. 4.1)
Closing Pictures
To close a picture
Use one of the following methods:
• Press Ctrl+F4

• Click the Close Tab button


• Select File > Close.
If a drawing has been modified, an Artist Modified window will be displayed providing you with the
opportunity to either save, or discard the changes, or cancel the operation.
See Also
"Saving Pictures" on page 1-11

Closing All

To close all open pictures


• Select File > Close All.
Artist closes all unmodified documents and displays an Artist Modified window for each
modified and unsaved document, providing you with the opportunity to either save, or discard
the changes, or cancel the operation.
See Also
"Saving Pictures" on page 1-11

Saving Pictures
Unless otherwise specified when saving, pictures are saved in CGM format to the project’s plots directory.
After a picture has been saved and then subsequently modified, select File > Save to save the changes with
the same file name, or File > Save As... to give it a new filename.

NOTE When saving in formats other than CGM, the screen does not automatically update to
reflect the change(s) to the new format. For instance, if saving a multi-colored format to
XBM, a 2 color format, the colors are not updated after saving. Close and reopen the file to
view the changes.

NOTE When saving a picture as a PDF document it should be noted that Acrobat imposes
implementation limits on size. The minimum page size allowed is 3 by 3 units
(approximately 0.04 by 0.04 inch) and the maximum is 14 400 by 14 400 units
(approximately 200 by 200 inches). If the size limit is exceeded, for example, the resultant
pdf document when viewed in Reader appears to be just white space.

See Also
"Save All" on page 1-13 and "Closing All" on page 1-11

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-11


With Epos® 4 Data Management (v. 4.1)
To save a picture

1. Click the Save button or select File > Save or Save As... to open a “File Select Dialog Box”
on page 1-27.

2. Enter the file name (e.g. stars_header) in the File name field.
3. Select the required file extension (e.g. cgm) in the Files of type field.
4. Optionally, enter a description in the Description field
5. Click OK to save. A message appears on the Status Bar indicating that the picture has been
saved.

NOTE When performing a Save As..., if saving a non-image picture to an image type then the
Image Resolution dialog box is displayed.

Select the required DPI, noting the memory requirements and click OK to save.

NOTE When performing a Save As..., if the file name already exists, you are prompted to confirm
that the existing file can be overwritten. If you wish to keep the original version of the file,
click No and enter a new name.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-12


With Epos® 4 Data Management (v. 4.1)
Save All

To save all open Artist pictures


• Select File > Save All. Artist will then:
— save all files which have been previously saved and then modified.
— open the File Select dialog box for each new file, prompting you to enter a file name,
directory, etc. (see "Saving Pictures" on page 1-11).

Printing

• Click the Print button or select File > Print to print an image to a printer.

Plotting
• Select File > Plot to save to a file.

Deleting Artist Files


Use the Delete Artist option to permanently delete a file.

To delete an Artist file


1. Select File > Delete Artist to display the File Select dialog box.
2. Locate and select the file to delete and click OK.
The Confirm delete dialog box is displayed.
3. Click OK to confirm the deletion.

To delete an Artist file via the Files window


1. Ensure the Files window is displayed, select Windows > Files.
2. Within the Files window, right-mouse click on the file and select Delete from the shortcut menu
displayed.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-13


With Epos® 4 Data Management (v. 4.1)
Palette Legend
The Palette Legend function can automatically create a color, marker, or fill (.cgm) plot file using the colors,
markers, or fills available on the “Appearance Window” on page 5-7 (stored in the graphics directories of
the software release and currently open project).
An example of each of the Palette Legends (Color, Marker and Fill) is shown in Fig. 4.

Fig. 4: Examples of the color, marker and fill palette legends

NOTE A complete list of the default Geolog colors, markers and fill filenames and descriptions is
provided in the geolog_palette_legend.xls file. This file is located in the <geolog
install>/doc/examples directory. This information would be useful when creating a
map file as you can copy and then paste the required text from the spreadsheet.

See Also
“Legend Marker and Fill” on page 4-8 for information on creating legends of all fills and/or
markers used in a CGM file.

To create a color, marker, or fill plot file


1. Select File > Palette Legend > attribute type to create a file displaying all colors in the
Appearance window, or all the markers or fill patterns.
A thumbnail image, the name and description are displayed.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-14


With Epos® 4 Data Management (v. 4.1)
2. Save, print or discard the file, as required.

Stack CGMs
The Stack CGMs function provides the ability to combine several CGM files into one file in one operation.

NOTE The module, cgm_stack, can also be used outside the Artist application for CGM composite
production.

See Also
“Insert From File” on page 2-22 for information on inserting a file (created in another software
package or an Artist picture) into an existing Artist picture.

To combine several CGM files into a single file


1. Select File > Stack CGMs to display the "CGM Stack dialog box" on page 1-16.
2. Set the values for the fields as detailed in Table 1-1, "CGM Stack Dialog Box Options" on page 1-
16.
3. Click OK.
The file is automatically saved using the Output CGM File name supplied, and opened in Artist.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-15


With Epos® 4 Data Management (v. 4.1)
CGM Stack dialog box

Table 1-1: CGM Stack Dialog Box Options


Field / Button Description
Input CGM Files
Files List Selected files are displayed in this list.

Ellipsis button Click the Ellipsis button to display the File Select dialog
box to locate and select the required CGM files. See Fig. 5 for an
example.
Remove Select a file in the list and click the Remove button to remove
the file from the list. functionality missing???
Up/Down Arrows Select a file in the list and then click on the Up or Down arrow
to change the position of the files—see Orientation and
Justification below. functionality missing???
Output CGM File

Ellipsis button Enter a name or click on the Ellipsis button to locate and
select an existing file name.
Note: Existing files are overwritten without warning.
Orientation and Justification
Up, Down, Left, Right Toggle ON the direction in which the files are to be displayed.
Direction is according to the order of the files listed in the Input
CGM Files field, starting with the file listed at the top (e.g. if the
first file in the list is myfile.cgm and direction is specified as
Up, myfile.cgm is displayed at the bottom of the picture).
See Fig. 6 and Fig. 7 for examples.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-16


With Epos® 4 Data Management (v. 4.1)
Table 1-1: CGM Stack Dialog Box Options
Field / Button Description
Horizontal, Vertical Specify the justification options as follows:
If Up or Down has been selected, Horizontal justification can be
set to Left, Center or Right.
If Left or Right has been selected, Horizontal justification can be
set to Top, Half or Bottom.
See Fig. 6 and Fig. 7 for examples.
Space and Size
Spacing(s) Enter a single value to space all files evenly; enter multiple
values (with a space between) to space the files at varying
distances.
Size of Unscaled Plots Scaling for all files is actual size but, if a CGM file does not
contain sizing information, a size can be specified which sets the
size of the picture in the non-orientation direction.

To modify a composite file


• If the file is still open in Artist, it can be modified by selecting File > Stack CGM and making
the necessary changes. The file is automatically saved and reopened.
• If the file has been closed, select File > Open to locate and open the file and make the necessary
changes. The file is automatically saved and reopened.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-17


With Epos® 4 Data Management (v. 4.1)
Examples

Fig. 5: Adding input CGM files

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-18


With Epos® 4 Data Management (v. 4.1)
Fig. 6: Example of stacking CGMs using vertical orientation and equal spacing
Fig. 7: Using Stack CGMs - horizontal orientation, unequal spacing between CGMs

Run Command
• Select File > Run to run a command, script or module from the Artist application.

Repeat
• Select File > Repeat to repeat the previous action.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-20


With Epos® 4 Data Management (v. 4.1)
Exiting Artist

Exit Artist via the File menu. If a drawing has not been saved, the Artist Modified dialog box is displayed,
prompting you to save or discard your work before exiting. Click the Cancel button if you do not wish to
exit Artist.

To exit Artist
• Select File > Exit.

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-21


With Epos® 4 Data Management (v. 4.1)
Index

A
access
Artist application 3
Appearance window
attributes, create legend 15
Artist
drawing area, changing 7
starting 3

C
CGM
files, combine 16
combine
CGM files 16
create
Appearance window attributes legend 15

D
definition of
Artist objects 5
drawing 5
image 5
display
area, format Artist 7
drawing
area in Artist, formatting 7
area, specify size and color 7
definition of 5
drawings
file location 3
use of 3

F
files
combine CGM 16

I
images
definition 5
file location 3
use of 3

O
objects
definition of Artist 5

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-22


With Epos® 4 Data Management (v. 4.1)
P
drawing
See also images 5
pictures
type/resolution, specifying on open/save 10
Properties dialog box
Artist 7

R
resolution/picture type, specifying on open/save 10
run
Artist 3

S
stack
CGMs 16
start
Artist 3

Geolog® 7 – Paradigm™ 2011 Artist Basics 1-23


With Epos® 4 Data Management (v. 4.1)
Geolog® 7 – Paradigm™ 2011 Artist Basics 1-24
With Epos® 4 Data Management (v. 4.1)

You might also like