Professional Documents
Culture Documents
S. Quantities as
Description of Items
No. per Tender
1 2 3
1 Board/cast-in-situ R.C.C piles complete as per drawing and technical
specification. [MoRTH Specification : Section 1100,1600&1700(N)]
Using Batching Plant, Transit Mixture, and Concrete Pump. 1782.00
Depth up to 3m 4539.26
Above 3m to 6m depth 284.874
Above 6m depth 396.505
3 If the pile cap rests on ground add for leveling course. [MoRTH
Specification : 100(N),1500(N),1700(N)]. 45.030
4 RCC M-35 Grade Reinforced cement concrete in pile cap complete at
all levels with steel formwork etc. as per drawing and technical
specification. Using Batching Plant, Transit Mixture, and Concrete
Pump. Design mix concrete. [MoRTH Specification : 1100(N),1500(N), 941.87
1700(N)].
Up to 5 meter height
7 R.C.C M-35 grade Structural Cement concrete for plain concrete/
reinforced concrete for substructure at any level, complete as per
drawing and technical specification. Using Batching Plant, Transit
Mixture, and Concrete Pump.
16 Providing and applying tack coat on the prepared surface, with bitumen
emulsion RS-1 as per IS : 8887 & manufacturer’s specifications @ 2
kg /10sqm. With a self propelled or towed bitumen pressure sprayer
equipped for spraying the material uniformly at specified rates and
temperatures as per MoRTH specification Clause 503 & 112(Including 27203.85
cleaning of bituminous road surface.
20 P&F on culverts/ bridges deck rain water spouts made of cast iron as
per MoRTH specification complete. 174.00
21 Marking Centre Line stop lines etc. on road as per IRC pattern with
thermoplastic paint of approved quality and make with 8% glass beads
laid on the road surface at temperature 160° C with a special applicator
machine complete with labour, material and traffic diversion 305.67
arrangements.
22 PCC M-15 grade leveling course below approach slab complete as per
drawing and MoRTH specifications clause 14.10.
163.87
40 Providing and laying seal coat for sealing the voids in a bituminous
surface laid to the specified levels, grade and cross fall, including
cleaning and rolling with a smooth wheeled roller 8 - 10 tonne capacity
finished to required level and grades, complete as per MoRTH
specification clause 513 Type A - comprising of 11.2 mm to 2.36 mm
size aggregate @ 0.09 Cum per 10 Sqm and bitumen binder @ 9.8 Kg / 7133.70
10 Sqm complete.
43 Providing and fixing hand rail over the crash barrier kerb consisting of
MS base plate, embedded fasterner and nuts, MS vertical plates and
pipes etc, as shown in the drawings and as per specifications and
painting the same with 3 or more coats of paints. All the railling
components as mentioned above to be hot dip galvanised with a zinc
coating of at least 175 gm/sqm. Item to include all incidental works 1799.84
required to complete the work as directed by the Enginneer-in-charge.
44 Painting two coats after filling the surface with synthetic enamel paint
in all shades on plastered concrete surfaces as per MORTH
specifications Cl. 803. 7490.69
51 Boring for hand-pump in clay, fitting strainer and pipe (b) above 75
mm dia bore, but not exceeding 100 mm dia (i) from 15 to 30 meter 5.000
52 Providing & fixing PVC Rain water pipe 6 kg. pressure of ISI mark (b)
150 mm dia PVC pipe 6 kg. pressure, Supreme, phinolex, Prince 3.040
53 Providing & fixing PVC sloted pipe ISI mark. 150 mm dia Supreme,
phinolex, Prince etc 26.820
54 Providing 150mm dia cowl over 150mm dia PVC pipe at the top
55 Providing and fixing SFRC manhole covers and frames markd with IS:
12592 including setting the same to correct lines and levels in 1:2
cement sand mortar over manhole including carriage loading, unloading
stacking, handling, re-handling etc. complete in all respect to the
satisfaction of engineer-in-charge. Type: Extra heavy duty set (MD-10)
560 mm clear opening. 3.000
Extra Item
56 Geotechnical Investigations:
To Analyze the soil conditions by drilling bore holes at different
locations to represent soil strata to conduct Standard penetration test
(SPT) for determining SBC in hole as per IS-2131 including collection
of disturbed and undisturbed soil samples at every 3.0 m or at change of
strata analyzing the soil or grain size, atterberg limits, bulk & dry
densities, shear parameters and specific gravity. In case of rock,
collection of core, calculation or RQD (Rock Quality Designation) and
core recovery and comprehensive strength of rock. Geo-tech
investigation to be done at different locations complete in all respect as
per specifications.
57
Lifting, handling and transporting precast girders from the
_x000D_casting yard to the place of launching/erection and then finally
launching and _x000D_placing the girder in position over pier caps/
pedestals/bearings etc at any _x000D_height above rail level, squaring
in position by suitable bracing arrangements till _x000D_casting of
diaphragm, over electrified/ non electrified, running/ non running /
or_x000D_ other than track portion including traffic/ non traffic block.
Launching to be done with the help of heavy duty cranes of
sufficient/required capacity.
58
Placement of Precast reinforced Cement Concrete (segmental units) with
the help of suitable capacity road crane at desired location without traffic
block with all contactor's labour, tools and material, crane, machinery,
preparation of surface as directed by Engineer including filling of joints
by epoxy mortar and laying of required layer of sand with cost of epoxy
and sand, all material and labour, tools, plants, machinery, all lead, lift
etc.
Plie load testing on single vertical piles in accordance with IS 2911 (Part
IV) including installation of loading platform and preparation of pile
59 head or construction of test cap and dismantling of test cap after test etc.
complete as per direction of Engineer and as per clause 1100 of
MoRT&H specification including all labour, material, machinery.
61 HSFG Bolt
62 Shear stud
63 Metallising
0
0
0
cum 3611.00 1610542 446.01 1610542 0
Tonne
597.47 3002.00 1793604.94
load
each
21305.94 3.00 63917.82
pile
cum 967.00 2800.00 2707600
Kg 350.00
Kg 410.00
Sqm 910.00
188431657 217075232
% Extra item total
28643575
9372554
19271021.67
Executive Engineer
PWD Dn Neem KaThana
Neem Ka Thana
AR GHASSIPURA VILLAGE L/C NO. 85 AS PER APPROVED GAD
0.00 #DIV/0!
6964.12 2437440.60
7550.08 3095532.80
1931.39 1757562.17
234214074.48
er
hana
Remarks
Actual qty taken for Site 195.35 0.00 0.00 195.35 0.00
requirement.
As per site the qty is in extra 0.00 0.00 0.00 0.00 0.00
height.
0.00
15670928.295
cess in this tender Overall Excess
766800.00 2341.50 559.50 4028400.00 1.00
0.00 1.00
16747549.86
Office of the Executive Engineer, PWD, Dn. Neem Ka Th
Name of Work:- CONSTRUCTION OF ROB ON DFC ALIGNMENT ON SHAHAPURA CHIRAWA RO
GHASSIPURA VILLAGE L/C NO. 85 AS PER APPROVED GAD
Deviation Statement
Quantities as
S.
Description of Items per NEW Unit
No.
Tender
1 2 3 4
2 Earth work in excavation for foundation of structure complete with all
lift, dewatering shoring and shuttering etc. .including refilling of
trenches in 25.mm layers, ramming, watering and disposal of surplus
soil within a lead of 1000 meters, as per drawing and technical
specification.[MoRTH Specification : Clause : 304]. (In ordinary Soil )
22 PCC M-15 grade leveling course below approach slab complete as per
drawing and MoRTH specifications clause 14.10.
29.13 cum
51 Boring for hand-pump in clay, fitting strainer and pipe (b) above 75
mm dia bore, but not exceeding 100 mm dia (i) from 15 to 30 meter 5.000 mtr
52 Providing & fixing PVC Rain water pipe 6 kg. pressure of ISI mark (b)
150 mm dia PVC pipe 6 kg. pressure, Supreme, phinolex, Prince 3.040 Rmt
53 Providing & fixing PVC sloted pipe ISI mark. 150 mm dia Supreme,
phinolex, Prince etc 26.820 Rmt
54 Providing 150mm dia cowl over 150mm dia PVC pipe at the top
55 Providing and fixing SFRC manhole covers and frames markd with IS:
12592 including setting the same to correct lines and levels in 1:2
cement sand mortar over manhole including carriage loading, unloading
stacking, handling, re-handling etc. complete in all respect to the
satisfaction of engineer-in-charge. Type: Extra heavy duty set (MD-10)
560 mm clear opening. 3.000 Nos.
Extra Item
57
Lifting, handling and transporting precast girders from the
_x000D_casting yard to the place of launching/erection and then finally
launching and _x000D_placing the girder in position over pier caps/
pedestals/bearings etc at any _x000D_height above rail level, squaring
in position by suitable bracing arrangements till _x000D_casting of 512.425 MT
diaphragm, over electrified/ non electrified, running/ non running /
or_x000D_ other than track portion including traffic/ non traffic block.
Launching to be done with the help of heavy duty cranes of
sufficient/required capacity.
58
Placement of Precast reinforced Cement Concrete (segmental units) with
the help of suitable capacity road crane at desired location without traffic
block with all contactor's labour, tools and material, crane, machinery,
preparation of surface as directed by Engineer including filling of joints 3329.100 MT
by epoxy mortar and laying of required layer of sand with cost of epoxy
and sand, all material and labour, tools, plants, machinery, all lead, lift
etc.
5 6
95.00 625255
115.00 194375
115.00 48361
54180.00 6051635
54180.00 8495478
11.00 108900
7000.00 2772000
3611.00 105188
9798.00 156572
76.00 368699
3611.00 1216438
862.00 2218788
1150.00 2846250
6031.00 3880949
31.50 311850
4900.00 12109860
5600.00 474040
1495.00 44536
3900.00 142857
4962.00 1017061
904.00 11187
904.00 11187
904.00 11187
904.00 29758
75.00 468
25000.00 666000
575.00 8625
575.00 2875
230.00 699
345.00 9253
5750.00 17250
6825.00 3497301
1930.00 6425163
53880045
Office of the Executive Engineer, PWD, Dn. Neem
Name of Work:- CONSTRUCTION OF ROB ON DFC ALIGNMENT ON SHAHAPURA CHIRAWA ROAD
NO. 85 AS PER APPROVED GAD
Deviation Statement
S. Quantities as
Description of Items
No. per Tender
1 2 3
1 Board/cast-in-situ R.C.C piles complete as per drawing and technical
specification. [MoRTH Specification : Section 1100,1600&1700(N)]
Using Batching Plant, Transit Mixture, and Concrete Pump. 1782.00
Depth up to 3m 4539.26
Above 3m to 6m depth 284.874
Above 6m depth 396.505
3 If the pile cap rests on ground add for leveling course. [MoRTH
Specification : 100(N),1500(N),1700(N)]. 45.030
4 RCC M-35 Grade Reinforced cement concrete in pile cap complete at
all levels with steel formwork etc. as per drawing and technical
specification. Using Batching Plant, Transit Mixture, and Concrete
Pump. Design mix concrete. [MoRTH Specification : 1100(N),1500(N), 941.87
1700(N)].
Up to 5 meter height
7 R.C.C M-35 grade Structural Cement concrete for plain concrete/
reinforced concrete for substructure at any level, complete as per
drawing and technical specification. Using Batching Plant, Transit
Mixture, and Concrete Pump.
16 Providing and applying tack coat on the prepared surface, with bitumen
emulsion RS-1 as per IS : 8887 & manufacturer’s specifications @ 2
kg /10sqm. With a self propelled or towed bitumen pressure sprayer
equipped for spraying the material uniformly at specified rates and
temperatures as per MoRTH specification Clause 503 & 112(Including 27203.85
cleaning of bituminous road surface.
20 P&F on culverts/ bridges deck rain water spouts made of cast iron as
per MoRTH specification complete. 174.00
21 Marking Centre Line stop lines etc. on road as per IRC pattern with
thermoplastic paint of approved quality and make with 8% glass beads
laid on the road surface at temperature 160° C with a special applicator
machine complete with labour, material and traffic diversion 305.67
arrangements.
22 PCC M-15 grade leveling course below approach slab complete as per
drawing and MoRTH specifications clause 14.10.
163.87
23 Reinforced cement concrete approach slab (M 30 grade) including
reinforcement and formwork complete as per drawing and MoRTH
specifications section 1500, 1600, 1700, 2704. 15.75
40 Providing and laying seal coat for sealing the voids in a bituminous
surface laid to the specified levels, grade and cross fall, including
cleaning and rolling with a smooth wheeled roller 8 - 10 tonne capacity
finished to required level and grades, complete as per MoRTH
specification clause 513 Type A - comprising of 11.2 mm to 2.36 mm
size aggregate @ 0.09 Cum per 10 Sqm and bitumen binder @ 9.8 Kg / 7133.70
10 Sqm complete.
43 Providing and fixing hand rail over the crash barrier kerb consisting of
MS base plate, embedded fasterner and nuts, MS vertical plates and
pipes etc, as shown in the drawings and as per specifications and
painting the same with 3 or more coats of paints. All the railling
components as mentioned above to be hot dip galvanised with a zinc
coating of at least 175 gm/sqm. Item to include all incidental works 1799.84
required to complete the work as directed by the Enginneer-in-charge.
44 Painting two coats after filling the surface with synthetic enamel paint
in all shades on plastered concrete surfaces as per MORTH
specifications Cl. 803. 7490.69
45 Construction of Reinforced Earth Wall with valid certification for
specific purpose with drawing and design of precast RE panels
minimum M-35 grade & thickness 200mm. The construction included
supply & installation of reinforcing element, EPDM, tail piece of special
type consisting of high density polythene sheet Geogrid material and all
accessories as per technical specification including testing at Peak load.
(scope of work includes designing, proof checking, approval, casting in
yard, curing, storing, transporting, lifting, placing in position, erection 5613.70
with all necessary fasterner etc. complete including cost of all necessary
accessories).
51 Boring for hand-pump in clay, fitting strainer and pipe (b) above 75
mm dia bore, but not exceeding 100 mm dia (i) from 15 to 30 meter 5.000
52 Providing & fixing PVC Rain water pipe 6 kg. pressure of ISI mark (b)
150 mm dia PVC pipe 6 kg. pressure, Supreme, phinolex, Prince 3.040
53 Providing & fixing PVC sloted pipe ISI mark. 150 mm dia Supreme,
phinolex, Prince etc 26.820
54 Providing 150mm dia cowl over 150mm dia PVC pipe at the top
55 Providing and fixing SFRC manhole covers and frames markd with IS:
12592 including setting the same to correct lines and levels in 1:2
cement sand mortar over manhole including carriage loading, unloading
stacking, handling, re-handling etc. complete in all respect to the
satisfaction of engineer-in-charge. Type: Extra heavy duty set (MD-10)
560 mm clear opening. 3.000
Extra Item
56 Geotechnical Investigations:
To Analyze the soil conditions by drilling bore holes at different
locations to represent soil strata to conduct Standard penetration test
(SPT) for determining SBC in hole as per IS-2131 including collection
of disturbed and undisturbed soil samples at every 3.0 m or at change of
strata analyzing the soil or grain size, atterberg limits, bulk & dry
densities, shear parameters and specific gravity. In case of rock,
collection of core, calculation or RQD (Rock Quality Designation) and
core recovery and comprehensive strength of rock. Geo-tech
investigation to be done at different locations complete in all respect as
per specifications.
57
Lifting, handling and transporting precast girders from the
_x000D_casting yard to the place of launching/erection and then finally
launching and _x000D_placing the girder in position over pier caps/
pedestals/bearings etc at any _x000D_height above rail level, squaring
in position by suitable bracing arrangements till _x000D_casting of
diaphragm, over electrified/ non electrified, running/ non running /
or_x000D_ other than track portion including traffic/ non traffic block.
Launching to be done with the help of heavy duty cranes of
sufficient/required capacity.
58
Placement of Precast reinforced Cement Concrete (segmental units) with
the help of suitable capacity road crane at desired location without traffic
block with all contactor's labour, tools and material, crane, machinery,
preparation of surface as directed by Engineer including filling of joints
by epoxy mortar and laying of required layer of sand with cost of epoxy
and sand, all material and labour, tools, plants, machinery, all lead, lift
etc.
Plie load testing on single vertical piles in accordance with IS 2911 (Part
IV) including installation of loading platform and preparation of pile
59 head or construction of test cap and dismantling of test cap after test etc.
complete as per direction of Engineer and as per clause 1100 of
MoRT&H specification including all labour, material, machinery.
61 HSFG Bolt
62 Shear stud
63 Metallising
4 5 8 10
0
0
0
0
Tonne 54180.00 434.68 408.643
0
0
0
0
Tonne 225.00 27999.04 27999.04
0
Tonne 54180.00 212.39 75.934
1710000
6607259.7444
0
0
0
nos. 1713.00 174.00 174.00
0
2468792.4
0
Each 12.00 150.00 150.00
0
Sqm 100.00 7490.69 7494.25
259944.069
0
mtr 575.00 5.00 0.00
0
Rmt 230.00 3.04 0.00
0
Rmt 345.00 26.82 0.00
0
0
0
0
9792339.375
3069761.5
0
Tonne
597.47 3002.00 3002
load
each 0
21305.94 3.00 3
pile
5485655.62
2437440.6
3095532.8
1757562.17
41280210.21
Executive Engineer
PWD Dn Neem KaThana