Professional Documents
Culture Documents
RDAC runs on a PC, which can then be connected to the repeater either remotely
through an IP network, or locally via a USB or GPIO connection. The software then
provides a wide range of control, diagnostics and alarm reporting (see page two for a
list of supported functions).
Model
Model Description
Number
GMVN5520 MOTOTRBO RDAC Software CD
PMLN5269 MOTOTRBO RDAC Indicator Repeater Board Service Kit
Repeater Diagnostics
• Read Enabled/Disabled Status
• Read Analogue /Digital Status
• Read Wide or Local Area Status
• Read Transmit Power Status
• Read Available Channels
• Read Inbound RSSI
• Read IPv4 Address and UDP Port
Repeater Control
• Change Enabled or Disabled Status
• Change Channels
• Change Transmit Power Level
• Reset Repeater
• Knockdown Repeater
The tanapa number can be found on a label on the rear of the repeater:
RDAC is available to order on Motorola On-line now. Contact your local Account
Manager or Customer Care team if you have any questions.