Professional Documents
Culture Documents
Multiloaders
Dry Lasers
Film Processors
OEM Quality
Replacement Parts
20 09 C at a l o g
38 Saginaw Drive, Suite B, Rochester, New York 14623
(585) 594-1000
www.imtechimaging.com
Imtech Imaging, Inc. Telephone: 585-594-1000 Fax: (585) 272-7678 www.imtechimaging.com
Page 1
Imtech Imaging, Inc.
M ed ic a l Imag in g Re so ur c es
Imtech Imaging, Inc. has compiled the contents of this catalog to offer you
the very best in Dicom Networking and Laser Training,
Refurbished Equipment, and OEM Quality Replacement Parts.
W e hear the outcries everyday for the need for quality refurbished
equipment. Our goal is to become #1 in this arena, once given the
opportunity to sell you our refurbished equipment, rest
assured that you and your customer will be completely
satisfied.
Page 2
Table of Contents
1. Helpful Information 4
2. Part Orders and Warranty 5
3. Equipment Warranty 6
4. Recycling Program 7
5. Dryview Image Laser Equipment: Parts and Training 8
6. Dryview 8700 Image Laser and Parts 9-12
Page 3
Helpful Information
2.3. Business hours are Monday through Friday 8:30 a.m. to 5:30 p.m. EST.
4. All list prices are set by the OEM, and are subject to change without notice.
67. All parts prefixed with (RC) are a reconditioned part or may contain
reconditoned parts.
8. Part numbers with an (*) have been issued a new number that will
follow the original OEM number and should be used to order that part.
9. All parts are shipped UPS and Federal Express, in most cases the same
day or as directed otherwise.
10. Imtech Imaging, Inc. is confident that this catalog is the beginning of a long
and healthy business relationship.
Page 4
Part Orders and Warranty
Orders
Order parts by phone at (585) 594-1000,
or fax order to (585) 272-7678.
Quotes
Written part and equipment quotes are
honored for 30 days from the date of quote.
Pricing
All list prices are set by the OEM and
subject to change without notice. There
are no minimum order requirements or up
charges for P1 orders. Please call for
dealers net pricing.
Payment
NET 30 days from date of invoice.
Shipping
All parts are shipped UPS and Federal Express, in most cases the same day or otherwise as directed.
Parts Returns
No part returns after forty-five (45) days. All shipping charges on returned parts will be the responsibility
of the customer. All returned parts must be accompanied by a copy of the original invoice and shipped to:
Parts Warranty
All our new replacement and reconditioned parts are warrantied to perform at OEM standards for a
period of three (3) months from the date of invoice.
Warranted Parts
All replaced warranted part(s) will have a return authorization form and number assigned, both the war-
ranted part(s) and form will have to be returned to Imtech Imaging, Inc.
Page 5
Equipment Warranty
Imtech Imaging’s warranty and reputation go hand in hand, offering you and your customers peace of
mind in purchasing decisions.
Our refurbished Dry Lasers, MIMS, and associated products are sold with a Six Month Limited Parts
Warranty. Our refurbished Multiloaders and Film Processors include a One Year Limited Parts
Warranty.
The equipment warranty covers the no cost replacement of faulty part(s) only, it does not include the
labor required to replace that part(s).
Page 6
Recycling Program
PRINTED CIRCUIT
BOARDS: Dry Laser PCB
M6B PCB’s 10K + Above
5000 PCB
3000 PCB
480-460 PCB
M35 PCB
Accumulator PCB
RACK ASSEMBLIES,
MOTORS and DRIVES: From Most Kodak Processors
Credit Program
Customers have the option to receive credit for merchandise put toward
the purchasse of equipment and parts.
Page 7
Dryview Laser: Equipment, Parts and Training
Imtech Imaging, Inc. has a multitude of dry lasers, parts, keypads, fiber optic cable,
PCB’s. If you do not find the part number you are looking for, please contact us at
(585) 594-1000.
Training
Imtech Imaging, Inc. offers Dicom networking fundamentals: MIMS: 25, 100, 200,
and 200E. and a wide range of laser training: 8100, 8300, 8610, 8700, 8900,
AGFA Drystar. Please contact us for a current schedule.
Page 8
Dryview 8700 Image Laser
The DryView 8700 Imager is a high volume 14 x 17 in. format that is designed for CT, MRI,
DSA, and other applications that can be interfaced with a PACS Link for basic network print-
ing with exceptional speed and diagnostic images quality all at a affordable first step towards
PACS.
Control Is Easy
Ease Of Use
Featuring nine different format options from 1:1 to 20:1, the 20:1
format is accommodated without compression. Processing up to
a 120 films per hour and self calibrating to optimize image
quality without operator intervention. The automatically opened
and closed 125 sheet daylight loaded film cartridge is easily
replaced by opening the front access door, remove the empty
cartridge and placing the new cartridge on the cartridge guides
and closing the door.
Advantages
Having 78 micron laser spot spacing, 325 dpi resolution, and
4,096 gray levels for high quality crisp edged sharpness. The
DryView 8700 self calibrates for consistent contrast and density,
and along with a PACS Link interface that converts data from
legacy modalities to DICOM so the 8700 can receive images over
a network for hardcopy viewing. Therefore, enhancing
productivity.
Page 9
Refurbishing and Specifications of the DryView 8700
Dimensions
Length 32 inches. Width 26 inches. Height 50.4 inches.
Electrical Requirements:
200/220/240 vac. +/- 10%
Warranty
Six months parts only. See warranties for specifics.
Exterior Panels
All the panels are repaired and refinished in a light gray and greige industrial
coating to match the OEM’s lasted color configuration, a new name plate is
installed to match the original OEM appearance.
Mechanical Systems - Rollback Asssembly - Pickup Assembly - Platen Module - Film Transport -
Film Processor
The mechanical systems are disassembled, polished, refinished, rebuilt, inspected, tested, and reassembled to the main frame
along with new belts, sensors, solenoids, interlocks, charcoal filter, all other filters and felts, clam shell aluminum foil, heat
rollers, recoated drum assembly, drum brushes, stripper rollers assembly, etc. All are adjusted to OEM specifications and
monitored at run in to assure trouble free service.
Electronic Assembly - Digital Interface - Fiber Interface - Image Processor - Memory Daughter -
Machine Interface - New Modem - Power Distribution - System Control - Translator Daughter -
Video Interface, etc.
The electronic PCB’s are all cleaned and inspected configured to your
specifications, reinstalled and tested. During power up the power supply and all
test points are checked for correct operating voltages to ensure all components
are set to OEM specifications.
Page 10
8700 Dry View Parts
*Note:
An additional $1,000 invoice will be issued if Drum Core is not returned within 30 days
**Note:
An additional $4,250 invoice will be issued if Optics Module Core is not returned within 30 days
***Note: Price is exchange
Page 11
8700 Dry View PM Parts
Page 12
Dryview 8300 Image Laser
The Dry View 8300 Imager is a high quality 8 x 10 inch film printer of compact design. Perfect
for ultrasound, C-arm, nuclear medicine, stereotactic, and other applications. It is capable of a
direct connect or interfaced to a PACS link for basic network printing with outstanding diagnostic
image quality.
Dimensions
Height 18 inches, Width 18 inches, Length 26 inches.
Electrical Requirements
110 VAC +/- 10% 60 Hz
Warranty
Six months parts only. See warranties for specifics.
Advantages
Featuring true dry laser technology, four different format options
1:1, 2:1, 4:1 and 6:1. Producing up to 55 images per hour with
300 dpi resolution and 256 gray levels. Easy to replace 100 sheet
daylight loaded film package, and automatically monitors contrast
and density for superior image quality. The 8300 Dry View
Imager enhances work flow and productivity.
Page 13
Dryview 8100 Image Laser
The Dryview 8100 Imager is a high quality 14 x 17 inch designed for low to medium volumn image
facilities with the benefits of dry laser technology. Perfect for CT, MRI, and DSA. Capable of a direct
connect or interface to a PACS links for basic network printing and outstanding diagnostic image quality.
Dimensions
Height 46 inches, Width 25 inches, Length 26 inches.
Electrical Requirements
110/240 VAC +/- 10%, 50/60 Hz
Advantages
Featuring true dry laser technology, 55 films per hour, 325 dpi
resolution over 4,000 gray levels, AIQC that automatically
calibrates the 8100 and adjusts contrast and density to meet user
preferences all without operator intervention.
Optional
8100 Keypad
Page 14
Dryview 8610 Image Laser
The Dry View 8610 Imager is an exclusive full field, high resolution digital mammography printer. An
affordable first step toward PACS and a perfect addition to any facility where digital imaging is warranted
to help meet the needs of rising demands for schedueld mammogram visits.
Dimensions
Height 18 inches, Width 18 inches, Length 26 inches.
Electrical Requirements
100-240 VAC, 50/60 Hz
Warranty
Six months parts only. See warranties for specifics.
Advantages
Featuring true dry laser technology, a built-in PACS
interface capable of converting image data to DICOM and receiving DICOM image data from a
network. Printing up to 40 images per hour with 655 dpi resoluion, over 4,000 gray levels, and with
no operator intervention, monitors contrast and density presets for consistent film to film image
quality, thus making the 8610 Imager an important part of any mammography facility.
Electrical Requirements
100–240 VAC; 50/60 Hz; maximum 15 amps
Warranty
Six months - partys only. See warranties for specifics
Advantages
Featuring true dry laser technology, along with an optional six-
bin film sorter, it is a very expandable friendly laser printer that
can increase work flow and productivity for you today as well
as accommodate your future additional modality needs. A high
speed printer capable of printing 200 film per hour on five
different film sizes, up to three at a time each at 650 dpi, having
over 16,000 possible gray levels, the largest printable pixel matrix
on the market at 9,100 x 11,037 and the only dry imager with 100
Call for current parts list megapixels on 14 x 17 films, the decision is easy.
Optional
8900 Keypad
Page 15
8900 Dry View PM Parts - Rev. 1 & 2
Note: Imtech Imaging PM Kit does not include Trap Baffle (8E4966).
This is a stainless steel part and will last indefinitely with cleaning.
Page 16
MIM 9410 and MIM 200
Dimensions
Length 17.2 inches. Width 8.1 inches. Height 17.5 inches.
Electrical Requirements
90-135 VAC, 60 Hz or 180-265 VAC, 50 Hz
Warranty
Six months - parts only. See warranties for specifics.
The MIM 9410 and MIM 200 Image Acquisition Systems are
flexible and modular, having no monitor, keyboard, or mouse.
Used as a Modality Server which can capture images from up to
three directly connected Digital or Video modalities, converting
the image data to DICOM and sending the images to a network
destination of choice for printing, or used as a Print Server which
receives DICOM images from an Ethernet network that the Print
Server continuously monitors and automatically captures images
addressed to it. After the images are formatted they are then sent
to a designated DICOM
compliant network printer.
This is all accomplished
without operator intervention.
Control is Easy
Operator uses host control devices or optional keypads to capture, format,
and print images. The touch screen keypad gives the operator many options
such as print, store, sequential store, erase, copies, stop print, format, etc.
For images that are received faster than the printer can print, both MIM
systems will store the images in memory until they can be printed, thus
increasing work flow and productivity.
Optional
IMS keypad
Page 17
Processor Equipment and Parts
Page 18
M6B 90-Second Film Processor
Used for General Radiography and with upgrades, can also be used for Mammography. This
versatile processor can be a standalone or docked to a mutliloader. It’s easy to use, maintain,
and delivers high quality 90-second processing. The M6B has become our flagship film
processor in recent years for good reason.
Control Is Easy
Quality Images
The electronically controlled temperature sensing system uses
thermostats, heaters, heat exchangers, and potentiometers to
control the developer, fixer, and dryer temperature. Optional
flooded replenishment rate help maintain chemistry in low
volume sites. A system that controls itself, and gives you options,
getting consistent quality radiographs has never been easier, no
matter what your particular needs may be.
Page 19
Refurbishing and Specifications of the M6B Processor
Dimensions
Length 28in. Length with feed tray 38.5 in., Width 30 in. Height 48.5 in.
Electrical Requirements:
Source 30 amp single phase - 208/220, 3-wire, earth ground required
Water Requirement
Temperature 40˚ to 85˚ F, Pressure 25-65 psi
Warranty
One year parts only. See warranties for specifics.
Sensing Components
The developer heater assembly, thermistor assembly, and overtemp assembly are replaced with new or reconditioned and
tested, a new thermowell that houses all these components is used on every processor, as well as a new LCD developer
temperature display is replaced on every M6B. The dryer thermistor is replaced with new or reconditioned, the dryer
overtemp thermistor and dryer temperature potentiometer is always replaced with new.
Chemistry Components
A new March recirculation pump, Gorman-Rupp replenishment pump, water inlet
solenoid valve, and a developer cooling solenoid valve are installed on
every M6B. The new or reused molded tank assembly is thoroughly inspected for
any defects and fitted with new or reused heat exchanger tubes, new seals, nuts,
and tank stiffeners. All diverter and drain valves located in the front and rear of
the processor are replaced with new, as well as all the tubing and hose clamps.
Page 20
M35A / AM 120-Second Film Processor
Designed for medium and low volume processing, this table top or stand mounted processor is a
great fit for imaging departments, surgical, and mammography suites. It has high quality results at
a low volume processor cost.
Control is Easy
The on-board electronics control a variety of essential system
controls, this allows you options such as developer and dryer
temperature control, which can be adjusted with the integrated
potentionmeters. Flooded replenishment rates are easily checked
with the quick disconnect tubing to eliminate removing the rack
assemblies and avoid possible chemistry spills.
Both the M35A and M35AM have service friendly access and can
be installed for through the wall operation and with the use of
ambient temperature wash water hot water plumbing isn’t
necessary, making for an easy installation.
Quality Imaging
The electronically controlled temperature sensing system uses
thermostats, heaters, heat exchangers, and potentiometers to
control the developer, fixer, and dryer temperature. Optional
flooded replenishment rate help maintain chemisttry in low volume
sites.
A system that monitors itself, and gives you options is just a few
reasons why the M35 has earned a worldwide reputation for
reliability and produces quality radiographies.
Page 21
Refurbishing and Specifications of the M35 Processor
Dimensions
Length 31in. Length with feed tray and receive bin 50 7/8 in.
Width 26 in. Height 20in. Height with stand 40 in.
Electrical Requirements
Source 20 amp 220V or 115V 50/60 HZ
Water Requirements
Temperature 40˚ to 85˚ F Pressure 25-65
Warranty
One year - parts only. See warranties for specifics.
Electrical Box
The electrical box is completely dismantled sand blasted, sanded , and repaired of any defects, then refinished in a satin
black industrial coating. All relays, solid state relays, EMI filter (220 Processors Only),and circuit breakers are replaced with
new or reused, and tested. A new or reconditioned PCB100 Board is installed. All reused components that have any signs of
wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable
service.
Sensing Components
The developer heater assembly, thermister assembly, and overtemp assembly are replaced with new or reconditioned and
tested, a new thermowell that houses all these components is used on every processor. A new dryer PCB 800 Board, dryer
overtemp thermister, and dryer temperature potentiometer is replaced on every processor to ensure correct dryer
temperature.
Chemistry Components
A new March recirculation pump, Gorman- Rupp replenishment pump,
water inlet assembly is installed on every M35 processor. The three
chemistry tank assemblies are replaced with new and fitted with new or
reused heat exchanger tubes, new seals, nuts, fittings, and tank stiffeners
are installed, as well as all the tubing , tubing fittings, and hose clamps are
replaced with new.
Page 22
MIN-R Mammography Film Processor
Designed for mammography and a shared processing environment, this stand alone table top or
stand mounted processor can also be docked to a miniloader 2000P for room light film handling.
This combination is ideal for mammo suites, resulting in hight quality processing in an affordable,
compact package.
Control is Easy
The MIN-R has service friendly access and can be installed for
through the wall operation and with the use of ambient temperature
wash water hot water plumbing isn’t necessary, making for an easy
installation.
Quality Imaging
The electronically controlled temperature sensing system uses
thermostats, heaters, heat exchangers, and potentiometers to
control the developer, fixer, and dryer temperature. Optional
flooded replenishment rate help maintain chemisttry in low volume
sites.
A system that monitors itself, and gives you options is just a few
reasons why the MIN-R has earned a worldwide reputation for
reliability and produces quality mammographs.
Page 23
Refurbishing and Specifications of the MIN-R Film Processor
Dimensions
Length 29.7 in. Length with feed tray and receive bin 51 in.
Width 26.5 in. Height 20.5 in. Height with stand 40 in.
Electrical Box
The electrical box is completely dismantled sand blasted, sanded , and repaired of any defects, then refinished in a satin
black industrial coating. All relays, solid state relays, EMI filter (220 Processors Only),and circuit breakers are replaced with
new or reused, and tested. A new or reconditioned PCB100 Board is installed. All reused components that have any signs of
wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable
service.
Sensing Components
The developer heater assembly, thermister assembly, and overtemp assembly are replaced with new or reconditioned and
tested, a new thermowell that houses all these components is used on every processor. A new dryer PCB 800 Board, dryer
overtemp thermister, and dryer temperature potentiometer is replaced on every processor to ensure correct dryer
temperature.
Chemistry Components
A new March recirculation pump, Gorman- Rupp replenishment pump, water
inlet assembly is installed on every MIN-R processor. The three chemistry
tank assemblies are replaced with new and fitted with new or reused heat
exchanger tubes, new seals, nuts, fittings, and tank stiffeners are installed, as
well as all the tubing , tubing fittings, and hose clamps are replaced with new.
Page 24
Refurbished Rapid Access Processors
Call for availability and quote
270RA, 460RA, 480RA, 2000, 2000A
3000RA, 5000RA
These processors have four integrated transport speeds for radiology departments where
multi-speed processing is necessary.
The refurbishing process of our Rapid Access Processors is the same thorough approach as
that of our flagship processors, same warranty, and the same committment to you and your
customers.
Cat. No. 270
Cat. No. 460
Cat. No. 480
Cat. No. 2000/A (not multi-speed)
Cat. No. 3000
Cat. No. 5000
A radiology department standard, this high intensity illuminator adjusts for easy viewing of
dense film. It features a rheostat foot switch control and swivel base that can be wall
mounted or placed on a desktop.
Finish
Light Greige
Dimensions
Width 6 in. Depth. 6.75 in. Height 7.5 in.
Electrical Requirements
120V 60Hz,.7 amps
Electrical Cord 3 conductor, 6 foot line cord
Page 25
Refurbished Multiloader 7000 Film Processor
Call for availability and quote
The multiloader 7000 is a room light film handler designed for high volume radiology departments,
accommodating 13 different film sizes 7 at time. Capable of unloading and loading a cassette, transporting the
exposed film to the integrated 3000RA processor delivering you a dry ready to read 35 x 43 cm radiograph in
just 80 seconds, without the need of a darkroom.
The refurbishing of our multiloader 7000’s follow the same thorough description of that of the ML300 and
ML700 Plus, same warranty and same commitment to quality.
Dimensions
Width 32.5 in. Depth. 33.5 in. Height 55 in.
Electrical Requirements
120/208V 60 Hz triple phase, 30 Amp
120/220V 60 Hz single phase, 30 Amp
120/240V 60 Hz single phase, 30 Amp
Water Requirements
Temperature 40 to 84 F
Flow Rate .5gal. Per minute (+/-10%)
Drain 4 gal. Per minute
The refurbishing of our miniloaders follow the same thorough description of that of the ML 300 and ML700,
same warranty and same committment quality.
Dimensions
Width 28.3 in., Depth 31.5 in., Height 55 in..
Electrical Requirements
110V/240V Single phase
Water Requirements
Temperature 40˚ to 85˚ F
Pressure 25-65
Cassettes
Min-R2 cassettes (18 x 24) and (24 x 30)
Page 26
Multiloader 700 Plus Daylight System
The Multiloader 700 Plus docked to a X-Omat Processor is a high volume room light film
handler that unloads exposed films and transports them to the processor, at the same time
reloading your cassette with unexposed film - all in just 15 seconds.
Control Is Easy
Ease Of Use
The Multiloader 700 Plus has many control panel options - you
can open the front door to access the seven supply magazines
(which hold 110 sheets of film each and can be configured to 15
different film sizes, seven at a time). At the touch of a button
there are special functions such as load only and unload only,
green, yellow, and red LEDs let you know it’s ok to begin another
cycle, there is currently a film being processed , or there is a
cycle error. The control panel display will show what magazine
level the current cassette size is using, as well as if a cassette was
empty or if it was unloaded, but not supplied with a new
unexposed film.
Advatages
The new steam lined Multiloader 700 Plus will help save techni-
cians trips to the darkroom, making the radiology department
more efficient and productive. With three install options (side-
by-side left or right feed configuration, or in-line configuration)
the Multiloader 700 Plus can be made to fit nearly any floor
space, eliminating the need for a darkroom, remodeling, and the
expense. This saves time and space.
Page 27
Refurbishing and Specifications of the Multiloader 700 Plus Daylight System
Dimensions
Height 49.2 in., Width 31 in., Depth 28 in., Depth with tunnel 39.75 in.
Electrical Requirements
190 to 250 VAC 10 AMP single phase 2-wire with earth ground 50/60 HZ.
Cycle Time
55 seconds - depending on film processor.
Warranty
One year parts only. See warranties for specifics.
Page 28
Multiloader 300 Plus Daylight System
The Multiloader 300 Plus is a film handler that can be used for mammography to the main
radiology department. The compact Multiloader 300 unloads X-Omatic or MIN-R2 cassettes,
processes the exposed film in the integrated 3000 RA processor which offers four processing
speeds, at the same time reloads the cassettee with a unexposed film and gives you a ready-to-
read radiograph in approximately 72-80 seconds depending on film size.
Control Is Easy
Ease Of Use
The Multiloader 300 Plus has many control panel options,
choose KWIK/RA, rapid, standard, or extended processing cycle,
access the three magazines easily from the front of the unit
(which holds 110 sheets of film each and can be configured to 15
different film sizes three at a time.) At the touch of a button there
are special functions such as load only and unload only, green,
yellow, and red LED’s display it is OK to begin another cycle,
there is currently a film being processed, or a error in the system
has occurred. The location and the number of the error will be
displayed so you can record it and bring it to the field engineers
attention for less down time. The control panel display will also
show what magazine level the current cassette size is using, as
well as if a cassette was empty or it was unloaded, but not
supplied with a new unexposed film.
Advatages
The compact and quieter Multiloader 300 Plus handles and
processes film near the examination site saving the technicians
trips to the dark room, making the radiology department more
efficient and productive. With it’s automatic standby feature,
static eliminator at the dryer exit, and the compact size of the
Multiloader 300 Plus it can fit nearly any floor space, eliminating
the need for a dark room and remodeling.
Page 29
Refurbishing and Specifications of the Multiloader 300 Plus Daylight System
Dimensions
Height 50.4 in., Width 32.5 in., Depth 33.6 in.
Integrated Processor
The refurbishing of the integrated processor follows the same thorough description as our
flagship processors.
Page 30
XRay Cassettes, Screens, Grids, ID Camera
Not only does Imtech Imaging, Inc. provide excellent repair work, we also provide a
variety of new & remanufactured products such as:
New Cassettes
Imtech Imaging, Inc. offers an extensive line of new x-ray
cassettes, including Agfa, JPI America, Kodak, Konica,
Rego, Soyee, Spectronics and Sterling. These cassettes offer
excellent quality and value. Contact us and we will help you
choose the right cassette for your needs.
Remanufactured Cassettes
Imtech Imaging, Inc. takes great pride in offering high quality refurbished x-ray cassettes to our customers.
The remanufactured cassettes that RCRC ships out are cassettes we would trust our own health with. We
offer refurbished cassettes in:3M, Agfa, DuPont, Fuji, Kodak, Konica. If you do not see the cassette listed
in which you are interested contact us. If we do not have what you need in stock, perhaps we can suggest
an acceptable alternative. No matter the size of your budget, Imtech Imaging, Inc. can provide you with an
excellent cassette.
ID Camera Products
The high cost of ID cameras can put a squeeze on any radiology department’s
budget. Imtech Imaging, Inc. has the solution. We provide high quality
remanufactured Kodak X-Omatic ID Cameras. These ID cameras operate like
new. Imtech Imaging, Inc. not only remanufactures the internal workings, but will
go the extra mile to make it look like new. Add
to this our 90 day guarantee and these ID
cameras are a reasonable way to acquire the
reliable equipment you need. If you would like
to know more about our refurbished ID
cameras, or inquire about another style of ID
camera please contact us.
Screens
Because having quality radiographs is important to you, it is important to
Imtech Imaging, Inc. With that in mind our technicians can assist you with
the proper intensifying screen combination for your needs. Imtech Imaging,
Inc. can choose from a wide variety of intensifying screen sizes, speeds and
brands, including:3M, Agfa, Fuji, Kiran, Kodak, Konica, MCI Optionix, and
Sterling. These screens can be installed directly into your existing x-ray
cassettes, or you may choose to have an x-ray cassette built to your specifications.
Page 31
XRay Cassettes, Screens, Grids, ID Camera
Grids
Aluminum Interspaced X-Ray Grid Advantage
Accommodate standard film sizes from 5 x 7” to 14 x 36” ( special sizing also available). Array of ratios,
focal ranges and densities available. Contains the purest lead available to ensure superior efficiency in
removing scattered radiation. Use of aluminum interspaced and lead strips, precisely milled to uniformity,
provides superior quality images. Grid strips are sealed between a smooth aluminum cover and finished in
enamel, providing complete resistance to heat and moisture guaranteeing years of trouble free service.
Protect-A-Grid
Available with or without channels, Protect-A-Grid encasements are a convenient way to provide grid
protection. Built using Lexan plastic, Protect-A Grid encasements ensure a durable grid encasement,
excellent for daily use.
Grid Guards
Grid guards easily snap onto whatever x-ray cassettes your radiology
technicians are using. These metal framed grid adapters thus allow for easy
grid protection. Imtech Imaging, Inc. can encase your existing grid or
supply you with a grid and encasement to your specifications.
GRID-LOK
Imtech Imaging, Inc. GRID-LOK is the
latest innovation in grid protective devices.
Although it is made of light-weight durable
plastic, there is nothing light weight about the benefits offered by the
GRID-LOK. What’s unique about this device is that it is designed with easy to
use pressure clips that hold the cassette in place. Not only is your grid protected
within the GRID-LOK device, the cassette is securely held in place so there
is no danger of dropping the cassette out of the device causing physical harm
or cassette damage. The GRID-LOK will accept all types of cassettes, easily
converting any cassette to a grid cassette, and is excellent for CR applications.
The GRID-LOK provides an additional layer of protection against contamina-
tion from blood-contained viruses.
The distinctive locking feature of the Grid-Lok securely holds in any 35 x 43 cm (14 x 17”) a technologist
chooses to utilize. For a closer look just click on the photo to the right. Currently available in 35 x 43 cm
(14x17”), the GRID-LOK can be ordered with any grid and carries a 1 year warranty against manufacturing
defects
Page 32
Film Shredder for the Radiology Department
Specifically designed with radiology in mind, the Imageater is essential for destroying all
unwanted images and film library purges. With it’s 16” film entrance, it will accommodate all
film sizes.
A powerful 2.1 HP motor provides the power to handle large runs without interruption.
The Imageater has specifically designed hardened steel, serrated cutting cylinders and has
a daily usage recommendation of 10,000 films per day. Cut type is a strip cut with a size of
7/32”, a continuous duty cycle, a 150 basket capacity of 14x17 radiographs.
With a Cutter Warranty of 20 years, the Imageater is sturdy and reliable. Other features include
auto start/stop, reverse, auto shut off when baket is full, auto-stop on jams, and a safety
interlock switch. The Imageater is a sensible addition to any radiology department.
Dimensions
Length 18.5 inches. Width 23.5 inches. Height 36.5 inches.
Electrical Requirements:
120 VAC
Warranty
Cutter warranty is 20 years. .
Page 33
Parts
Page 34
Parts - M6B Film Processor
Page 35
Parts - M6B Film Processor
Page 36
Parts - M6B Film Processor
Page 37
Parts - M6B Film Processor
Page 38
Parts - M35 Film Processor
Page 39
Parts - M35 Film Processor
Page 40
Parts - M35 Film Processor
Page 41
Parts - Min-R Film Processor
Page 42
Parts - Min-R Film Processor
Page 43
Parts - Min-R Film Processor
Kodak Min-R Film Processor Shafts
Part No. Description List Price
287003 Roller Shaft $54.74
287027 Drive Shaft $107.42
287037 Shaft $69.65
287039 Drive Shaft $190.88
287047 Drive Shaft $75.46
287079 Upper Shaft $90.32
287085 Lower Shaft $34.80
287088 Dryer Drive Shaft $34.88
3E0957 Main Drive Shaft $113.50
3E0982 Master Roller Shaft $73.11
3E0983 Cluster Roller Shaft $38.57
482222 Main Drive Shaft $111.70
Page 44
Parts - 5000 Film Processor
Page 45
Parts - 5000 Film Processor
Page 46
Parts - 5000 Film Processor
Page 47
Parts - 5000 Film Processor
Page 48
Parts - 3000 Film Processor
Page 49
Parts - 3000 Film Processor
Page 50
Parts - 3000 Film Processor
Page 51
Parts - 3000 Film Processor
Page 52
Parts - 2000 Film Processor
Page 53
Parts - 2000 Film Processor
Page 54
Parts - 2000 Film Processor
Page 55
Parts - 270 Film Processor
Page 56
Parts - 270 Film Processor
Page 57
Parts - 270 Film Processor
Page 58
Parts - 270 Film Processor
Page 59
Parts - 180 Film Processor
Page 60
Parts - 180 Film Processor
Page 61
Parts - 180 Film Processor
Page 62
Parts - 180 Film Processor
Page 63
Parts - Pumps and Motors
M35A/AM and Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
2000A
Part Number 240227 990403 (110v) 779519 (M35A-M) 240225
List Price $1,284.59 $952.86 $979.42 $224.70
Part Number 246839 (110v) (M35A & 2000A)
List Price $632.06
M35/m and 2000 Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 651861 (230v) 990402 (230v) 651863 651864
List Price $1,357.92 $864.16 $402.54 $875.18
Min-R Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 651861 990402 651863 2E4249
List Price $1,357.92 $864.16 $402.54 $838.07
M7/A/B Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 594760 418709 8B6920 594762
List Price 835.76 $543.80 $1,259.26 $627.57
180LP Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 1C4593 1C4594 7C8474 748638
List Price $1,102.80 $1,129.09 $970.41 $989.80
270RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 1C4593 1C4594 779325 (gear box) 748638
List Price $1,102.80 $1,129.09 $493.32 $989.80
Part Number 955703 (Motor)
List Price $615.00
3000RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 1C4593 1C4594 1C4591 (gear box) 9B8251
List Price $1,102.80 $1,129.09 $293.22 $675.28
Part Number 1C4589 (Motor)
List Price $439.56
M6AN/AW Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 914429 418702 3H4475 (60 hz.) 748683
List Price $1,205.30 $1,055.98 $924.48 $673.44
M6B (serial numbers below 10,000) Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 914429 622017 655658 748683
List Price $1,205.30 $1,169.86 $1,799.18 $673.44
M6B (serial numbers above 10,000) Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 333659 914491 333658 9B8359
List Price $670.84 $875.58 $1,178.17 $831.65
460RA & 480RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 943211 914491 779325 (gear box) 9B8359
List Price $1,397.36 $875.58 $493.32 $831.65
Part Number 955703 (motor 460, 480)
List Price $615.00
Part Number 963960 (cable needed for 460)
List Price $300.00
5000RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly
Part Number 5B6353 5B6352 5B6376 8B6625
List Price $887.98 $836.36 $1,019.53 $1,549.28
Page 64
38 Saginaw Drive, Suite B, Rochester, New York 14623
(585) 594-1000
www.imtechimaging.com
Page 65